IoTGateway/BSP/Linux/iMX6/Mfgtool

User Guide for using mfgtool

Enter recovery mode

ROM-5420

Set the correct boot mode, then power on.

EBC-RS03

Set the correct boot mode, then power on.

Other Projects

Set eng mode,then power on(1-off,2-on)

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device

Modify config file

modify cfg.ini

mfgtools/cfg.ini

[profiles]
chip = Linux

[platform]

[LIST]
name = ADV adv-loader & Image

[variable]
DDR = 1G
board = imx6qrsb4411a1
mmc = 0
image = fsl-image-x11-imx6qrom5420-20141218174618.rootfs.sdcard

which operation you want to do

[LIST]
name = 
ADV adv-loader & Image adv-loader & Image
ADV kernel		update zImage and dtb file
ADV u-boot		update u-boot
ADV adv-loader		update adv-loader

define config variable

[variable]
DDR = (size of memory)
board = (projects name)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )

Copy file

You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\

ADV Image 		fsl-image-qt5-imx6qprom7421a1-20170116192833.rootfs.sdcard
ADV kernel		zImage and dtb file
ADV u-boot		u-boot_crc.bin.crc & u-boot_crc.bin
ADV adv-loader		SPL

Running mfgtool and update

running the MfgTool2.exe and update

1. If you can’t running mfgtool2.exe, you can check MfgTool.log
2. Click “Start”,you can get information form debug console

   

3. After update finish,it will be shown below

   

4. Click “Exit” to terminate the application.