Introduction

Plugin Configuration Tool is a GUI tool for user to config Modbus plugin's settings.

How to

1.Click "File" from menu bar and select "Open" to select setting file.

2.Select your setting file and click "Open" button to open the file.

3.After your file and it's relate files are loaded, you can see the settings are showed at Plugin Editor.

1.Click "Add" to create new sensor settings.

2.Fill in the settings for your new sensor. after finished, click "Add" to confirm the creation.

3. Now, you can see a new row is added into the sensor list.

1. Select sensor and click "Detail" at the row you like to edit.

2. Edit your settings. after setting is changed, click "Close" to finish.

3. You can see the change is showed in sensor grid.

1. Select the sensor you like to delete.

2. Click "Detail" to make sure the sensor you like to delete, then click "Delete" to delete the sensor.

3. To delete all sensor and device settings, click "Delete" on main screen.

1.Click "File" from menu bar and select "Save" to save the settings to file.

2. Select a file or a new file name you like to save.