ROM-5880 user guide

資源特性(Features)

• Rockchip RK3568 Arm Quad Cortex-A55 up to 2.0GHz
• Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC
• Support 1 x HDMI2.0 4K, 1 x signal LVDS or 1 x 2ch MIPI DSI or 1 x eDP
• Support 4K H.264/H.265 Video decoder
• 2 x USB3.0, 2 x USB2.0, 4 x UART, 14 x GPIO
• 2 x PCIe3.0, 1 x SATA, 1 x MIPI CSI, 2 x Gigabit LAN
• Support Linux & Android

簡介（Introduction）

Advantech ROM-5880 SMARC 2.1 Computer-on-Module is powered by Rockchip RK3568 SOC which includes Quad-core Arm Cortex-A55 processors and Arm Mali-G52 3D graphics
engine. It provides rich display interface: HDMI 4K@60Hz, LVDS or DSI or eDP to meet different requirement. It also features USB3.0, PCIe 3.0, SATA, Gigabit Ethernet, MIPI-CSI for
embedded applications. It is the ideal solution for POS, vending, infotainment, Medical.
ROM-5880 is paired with the Advantech SOM-DB2510 SMARC2.1 development board for faster end product peripheral integration and time-to-market. The reference schematics and
layout checklist documentations for carrier board development will be provided along with the open-sourced Linux BSP, test utilities, hardware design utilities and reference drivers.

訂購資訊(Ordering Information)

規格（Specifications）

框圖（Block Diagram）

接口布局和尺寸(Layout and Sizes)

ROM-5880 Connector Location

Connector List

Debug

Position	Description
DEBUG	DEBUG Port

Switch

Position	Description
SW1	AT&ATX mode selection

SW1：AT/ATX Mode Selection

Setting	Function
1 off  2 on	AT Mode（Default）
1 on 2 off	ATX Mode

SOM-DB2510 A1 接口布局圖 Board Dimension Layout

The figures below indicate the main chips on SOM-DB2510 Development Board for  SMARC 2.1.

SOM-DB2510 Connectors and Jumper Settings

Connector Locations

Jumper Locations

Switch Locations

I/O Connctor Locations

Button Locations

LED Locations

接口引脚定義 (Pin definitions)

Connector List

Jumper，Switch，and Button List

LED Function List

Switch Settings

SW4 Boot Select/Force Recovery/Test Switches

LID Button Enable/Disable Switches

机械尺寸 (Mechanical Characteristics)

For more details regarding our 2D/3D models, please visit the Advantech COM support  service website at: http://com.advantech.com.

Board Mechanical Diagram -Front

 

Board Mechanical Diagram -Side1

 

Board Mechanical Diagram -Side2

 

Assemblly Diagram

These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.