Edge Sense LoRa GW Solution

Files Archives

[1]

Release

• ReyaxSol 0.0.1

Config file example

/etc/adv.ini

[wisepaas] url=rmm.wise-paas.com port=1883 [gateway] device_id=0007000E4CAB3235 node_num=2 polling_rate=20 [rf] band=TW hostaddr=1 networkid=0 networkspeed=3 crfop=15 [node-1] addr=8 [node-2] addr=69

Reyax AT Command Test Tools for Ubuntu

1. In Ubuntu Desktop , open two terminals and execute command as below
2. Terminal 1 (Left) , run "cd ReyaxHome" and "./atcmd_demo.bash"
3. Terminal 2 (Right) , run "cat /dev/ttyUSB0"
   RTENOTITLE
4. You can enter your choice in the left terminal to issue AT command
5. Message from AT Command RX will be shown in the right terminal.
6. If you want to change node address , press 0 to enter new node's address.