Wise32xxweb/LuCI

Default Setting

• IP Address: 192.168.1.1
  *Username: root
  *Password: ePaper

[[File:Webmin login.png|600px|Webmin login.png]]

Main Page / System Information

If logging successful, you will see the Overview page as following .

[[File:Webmin main.png|600px|Webmin main.png]]

Status

Firewall

This page show firewall rule table. When you change the ethernet interface of firewall setting , you should click Restart Firewall

System log

This page show system log message

kernel log

This page show Kernel log message in system

Processes

This page shows all running processes on your system, with child processes indented and displayed below their parent. For each process the PID, owner and command are displayed. You can terminate the running processes but you should know the risk of the service stop in system.

[[File:Webmin processes.png|600px|Webmin processes.png]]

System

System

• System Properties

This form is for changing the system's current time, which is used by all running processes. On operating systems that have a separate hardware clock, it can be used to set that too.

[[File:Webmin settime.png|600px|Webmin settime.png]]

• Change time zone

This form allows you to set the system's default time zone, which is used to convert the system time to a human-readable format and offset.

[[File:Webmin changetz.png|600px|Webmin changetz.png]]

• Time server sync

This form is for configuring the system to automatically synchronize the time with a remote server. Synchronization will be done using the Unix time protocol or NTP, depending on which commands are installed and what the remote system supports.

[[File:Webmin ntp.png|600px|Webmin ntp.png]]

Administration Users

Under Web menu ->System->administration, you can change Username and Password in LuCi Users page.

[[File:Webmin user.png|600px|Webmin user.png]]

[[File:Webmin back2default.png|600px|Webmin back2default.png]]

Backup/Restore

Click on Back to Advantech factory default, the value of all the web settings will be back to original setting.

Firmware Update

Please download the most updated Firmware version from Advantech Website and upload the image into SD card. After plugging the SD card into SD card slot, Firmware update process can be started. Click browse icon to view image file in the SD card.

[[File:Webmin update.png|600px|Webmin update.png]]

• Double click “mmcb1p1” folder.

[[File:Webmin update2.png|400px|Webmin update2.png]]

• Select the file with “emmc.img.gz”.

[[File:Webmin update3.png|400px|Webmin update3.png]]

• Click update icon to start firmware update. The firmware update process may take around 5~10 minutes, please don’t turn off the power or press the reset button. After the process completed, please type the default IP address to return to login page.

[[File:Webmin update4.png|600px|Webmin update4.png]]

• Please note, after firmware upgrade, the system will restore its default setting, the IP address will return to 192.168.0.1.

• Note: The device is unavailable during the upgrade process. Any connections to or through the device will be lost.

Service

Remote Management

In this Page, you can manage the router from anywhere on the Internet port

Network Configuration

In this page, you can set Network Interface, Routing Gateways , Hostname and DNS Client based on your networking environment.

[[File:Webmin networking.png|600px|Webmin networking.png]]

Ethernet

Setting Ethernet IP address.

• Select interface.

[[File:Webmin net.png|400px|Webmin net.png]]

• Edit Interface.

[[File:Webmin net2.png|400px|Webmin net2.png]]

Wifi

In this page, you can set wireless Interface, scan other wifi router in your environment or setting wifi AP mode. Default setting wifi Ap mode, The access point account is wise_3240 and no password

Next step is Wi-Fi Sta <-> Wi-Fi AP mode setting. This mode is means wise-3240 wireless uplink through another Wifi Ap router to internet and downlink offer the Wifi client access point. as following

1. Scan Wifi Ap

2. Join network and input ssid and password as your network environment

3. Dissable Wireless ,click add wifi Ap mode and input ssid 、password as you need