RSB-4680 user guide

1 資源特性(Features)
2 訂購資訊图片待换(Ordering Information)
3 规格（Specifications）
4 接口布局和尺寸(Layout and Sizes)
5 快速入门 (Quick Start)
- 5.1 系统下载 (OS Download)
6 Linux 燒錄方法 (Linux Flash eMMC Method)
7 方法一：Update through Android Tool
8 '方法二：'Update image through SD-Card
9 Generate SD card
10 Linux系统的基本使用(Linux System Basic Operating Method)
11 通用方法(General Method)
12 Linux BSP編譯方法(Android BSP Compile Method)
- 12.1 Yocto 3.0

資源特性(Features)

Rockchip ARM Cortex-A17 RK3288 Quad Core, 最高可达1.6GHz
搭载 2GB DDR3L 内存及 8GB eMMC
HDMI 3840x2160 at 60Hz, VGA 1920x1200 at 60Hz, 支持双通道18/24/30 bit LVDS
支持 4K H.264/H.265 视频解码器
6 UART, 6 USB2.0, 1 GbE, 8 GPIO, 1 MIPI CSI, 1 SPI
支持WIFI/ BT M.2, 3G/ 4G mini-PCIe
Support Linux and Android

訂購資訊图片待换(Ordering Information)

规格（Specifications）

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout

接口引脚定義 (Pin definitions)

接口引脚定義 (Pin definitions)

机械尺寸 (Mechanical Characteristics)

快速入门 (Quick Start)

系统下载 (OS Download)

'Linux系统 (Linux OS)'

Debian 9
Pan.Baidu_Link_for_RK3288 Password : 4jvr

Git BSP Tag Version	Product	BSP/Image	Date	Alpha Release	Beta Release	MP Release	Release Note	Comment	Release Owner
RK3288LBV2100	RSB-4680	2019-05-27	2019-05-27		V		Release Note	1.for QA test 2.release for PM	Yunjin.Jiang
RK3288DIV21040	RSB-4680	2019-09-05	2019-09-05		V		Release Note	1.for QA test 2.release for PM	Yunjin.Jiang
RK3288DIV21041	RSB-4680	2020-04-21	2020-04-21		V		Release Note	1.for QA test 2.release for PM	Yunjin.Jiang
RK3288DIV21045	RSB-4680	2021-08-10	2021-08-10	V			Release Note	1.for QA test 2.release for PM	Yunjin.Jiang

Debian 10
Baidu link for Debian10 Password：iz74

Image Version	Product	Date	Release	Release Note	Binary OS Image Name
DIV230009	RSB-4680	2021-04-13	Beta	Release Note	4680A3AIM20DIV230009_2021-04-13.img.tgz

Linux 燒錄方法 (Linux Flash eMMC Method)

方法一：Update through Android Tool

Step0: Need to use Micro USB to connect with RSB-4680 OTG port, and other Type-A USB to connect with your PC

Step1: Double click DriverInstall.exe .

Step2: Enter into MASKROM mode .

There are two ways to enter MASKROM .

1. Hardware way to enter MASKROM

（1）Connect PIN2-PIN1 of CN19 to Disable eMMC，reboot device to enter MASKROM mode.

（2）After device enter into MASKROM mode，then connect PIN2-PIN3 of CN19 to Enable eMMC.

RSB-4680 Connector Layout :

RSB-4680 CN19 PIN define :

2. Software way to enter MASKROM

When the device boot up to debian, you can use Terminal or Debug port to input the following command :

sudo reboot loader

Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .

Step3: Select the image path .

Step4 : Click update button to upgrade images .

<a href="http://ess-wiki.advantech.com.tw/wiki/images/9/92/RK3288_Debian9_AndroidTool_update.jpg" alt="http://ess-wiki.advantech.com.tw/wiki/images/9/92/RK3288_Debian9_AndroidTool_update.jpg" title="http://ess-wiki.advantech.com.tw/wiki/images/9/92/RK3288_Debian9_AndroidTool_update.jpg">Original file</a> ‎(915 × 466 pixels, file size: 125 KB, MIME type: image/jpeg)

'方法二：'Update image through SD-Card

Download SDDiskTool

<a href="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0" alt="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0" title="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0">https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0</a>

Step 1 : Put images to AndroidTool/rockdev/image, Make sure path is correct.

Step 2 : Double click rk3328-mkupdate.bat in AndroidTool/rockdev/ .

If there is no error, you will find update.img in AndroidTool/rockdev/ .

Generate SD card

Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool .

Step 2 : Choose SD card .

Step 3 : Choose update.img .

Step 4 : Create SD card .

NOTE :

The capacity of SD card is at least 4GB.

Linux系统的基本使用(Linux System Basic Operating Method)

UUU 使用方法(USB Connection (OTG port))

Display Setting (ROM-5620)

U-boot Command :

setenv fdt_file xxxx.dtb
env save
boot

Display
- LVDS
  - g070vw01
    - adv-imx8mxp-rom5620-a1.dtb
  - g150xgel05
    - adv-imx8qxp-rom5620-a1-lvds-chimei.dtb
  - g215hvn01
    - adv-imx8qxp-rom5620-a1-lvds-dual.dtb
- LVDS to HDMI
  - adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
- DSI to HDMI
  - adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
- DSI
  - auog101uan02
    - adv-imx8qxp-rom5620-a1-auog101uan02.dtb

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig

Command: Ping - I eth1 8.8.8.8 or Ping - I eth0 8.8.8.8

WiFi使用方法(WIFI Testing Method)

Command : 

# killall wpa_supplicant
# ifconfig wlan0 up
# wpa_passphrase "SSID" "PASSWORD" > /tmp/wpa.conf
# wpa_supplicant -BDwext -iwlan0 -c/tmp/wpa.conf
# udhcpc -b -i wlan0'''

ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

4G使用方法(4G Testing Method)

Command:
Test 4G: (EWM-C117FL06E - USB)
Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect
the card to CN6 PCIe_D slot on ROM-DB5901.
Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on
9680015491
and connect the IPEX connector to MT1 on EWM-C117FL06E module.
Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on
ROM-DB5901.
Step 4: Power on and execute the pppd command to connect to the network.

GPIO使用方法(GPIO Operating Method)

Loop-back Test (Take GPIO4 and GPIO5 as examples)  

Step 1: Connect GPIO4 and GPIO5
Step 2: Export GPIO interface

root@imx8qxprom5620a1 : ~# echo 456 > /sys/class/gpio/export
root@imx8qxprom5620a1 : ~# echo 452 > /sys/class/gpio/export

Step 3: Set direction

root@imx8qxprom5620a1 : ~# echo out > /sys/class/gpio/gpio1/direction
root@imx8qxprom5620a1 : ~# echo in > /sys/class/gpio/gpio2/direction

Step 4: Read value and set output value then check

root@imx8qxprom5620a1 : ~# cat /sys/class/gpio/gpio2/value
0r
oot@imx8qxprom5620a1 : ~# echo 1 > /sys/class/gpio/gpio1/value
root@imx8qxprom5620a1 : ~# cat /sys/class/gpio/gpio2/value
1

串口使用方法(Serial Port Operating Method)

RS-232 Test

SW7 Setting (SW7設置)

蓝牙使用方法(BlueTooth Operating Method)

Command : 

$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

遠程訪問及文件傳輸(Remote Access and File Transimmion)

查看主板IP位址 ( Chech IP Address )：

        Command : ifconfig

Windows下SSH访问及文件传输

SSH Remote Log into Device

SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码

通用方法(General Method)

查看CPU温度(Check CPU Temperature)

    root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

查看内存容量(Check Memory Capacity)

root@imx8qxprom5620a1:/# busybox free -m
             total       used       free     shared    buffers     cached
Mem:       1794920     516080    1278840      17252      9852        80292
-/+ buffers/cache:     425936    1368984
Swap:            0          0          0

查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

設置RTC (RTC Setting)

     root@imx8qxprom5620a1:/# systemctl stop ntpdate.service
     root@imx8qxprom5620a1:/# date 090816072021 && hwclock -w && date
             Wed Sep  8 16:07:00 UTC 2021
             Wed Sep  8 16:07:00 UTC 2021
     root@imx8qxprom5620a1:/# date
             Wed Sep  8 16:07:06 UTC 2021
     root@imx8qxprom5620a1:/#'''