Linux BSP User Guide for jetson series

Linux BSP Version

Ubuntu 18.04

Kernel 4.9.201

Build Environment on Host

Currently, we adopt Docker as build environment.

You can get the latest version of advrisc/u18.04-imx8lbv1 Docker image for developing nVidia jetson projects.

Docker command:

$ docker pull advrisc/u18.04-imx8lbv1

Run Docker example

Step1 Run docker container (example)

sudo docker run -it --name jetson_linux_risc -v /home/bsp/myLinux:/home/adv/BSP:rw --privileged advrisc/u18.04-imx8lbv1:latest /bin/bash

Step2 In container, change the user. (example)

 adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP

Install Some tools

$sudo apt-get install expect 

Getting Linux Source Code

EPC-R7200

$ cd ~/BSP
$ mkdir jetson_linux_risc
$ cd jetson_linux_risc
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ ../repo/repo init -u https://gitlab.wise-paas.com/epc-r7200/manifests.git
$ ../repo/repo sync

AIR-020

$ cd ~/BSP
$ mkdir jetson_linux_risc
$ cd jetson_linux_risc
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ ../repo/repo init -u https://gitlab.wise-paas.com/air-020/manifests.git
$ ../repo/repo sync

Build Image ( EPC-R7200 / AIR-020 )

Xavier NX / TX2 NX

$ cd $TOP
$ sudo ./scripts/build.sh -s 186

Nano

$ cd $TOP
$ sudo ./scripts/build.sh -s 210

Build Kernel

Xavier NX / TX2 NX

$ cd $TOP
$ sudo ./scripts/build_kernel.sh -s 186

Nano

$ cd $TOP
$ sudo ./scripts/build_kernel.sh -s 210

Flash Image

Before flashing the image, power off the DUT, press recovery button and power on.

	EPC-R7200	AIR-020
Xavier NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -d ./bootloader/tegra194-epcr7200.dtb  jetson-xavier-nx-devkit-emmc mmcblk0p1	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh jetson-xavier-nx-devkit-emmc mmcblk0p1
TX2 NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -d ./bootloader/tegra186-epcr7200.dtb  jetson-xavier-nx-devkit-tx2-nx mmcblk0p1	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
Nano	$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh -d ./bootloader/tegra210-epcr7200.dtb  jetson-nano-devkit-emmc mmcblk0p1	$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh jetson-nano-devkit-emmc mmcblk0p1

Flash DTB

	EPC-R7200	AIR-020
Xavier NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb xavier-nx-epcr7200 mmcblk0p1	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-emmc mmcblk0p1
TX2 NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb tx2-nx-epcr7200 mmcblk0p1	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
Nano	$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh -r -k DTB nano-epcr7200 mmcblk0p1	$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh -r -k kernel-dtb jetson-nano-devkit-emmc mmcblk0p1

Flash Mac Address

Intel I210

$ sudo -s
$ BDF=`lspci | grep 210 | awk '{print $1}'`
$ setpci -s $BDF COMMAND=0007

Get NIC

$./EepromAccessTool

Flash I210 address with mac_address = D4E5F6123456 ( If mac address = D4:E5:F6:12:34:56 )

$ ./EepromAccessTool -nic=<NIC> -f=Dev_Start_I210_Copper_NOMNG_8Mb_A2_3.25_0.03.hex -mac=$mac_address

Cold reboot the device.