EPC-R7200

Linux BSP Version

Ubuntu 18.04
Kernel 4.9.201

Released Image

• OS Support List ( Jetpack 4.5.1 / L4T R32.5.1 )

Build Environment on Host

Currently, we adopt Docker as build environment.
You can get the latest version of advrisc/u18.04-imx8lbv1 Docker image for developing nVidia jetson projects.
Docker command:

$ docker pull advrisc/u18.04-imx8lbv1

Run Docker example

Step1 Run docker container (example)

sudo docker run -it --name jetson_linux_risc -v /home/bsp/myLinux:/home/adv/BSP:rw --privileged advrisc/u18.04-imx8lbv1:latest /bin/bash

Step2 In container, change the user. (example)

 adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP

Dependncy Library

Please install library in the HOST outside of docker if you get Exec format error.

$sudo apt-get install qemu-user-static

Getting Linux Source Code

$ export GIT_SSL_NO_VERIFY=1

EPC-R7200
Jetpack 4.5.1 / L4T 32.5.1

$ cd ~/BSP
$ mkdir jetson_linux_risc
$ cd jetson_linux_risc
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/EPC-R7200/_git/manifests
$ repo sync

Jetpack 4.6.1 / L4T 32.7.1

$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/EPC-R7200/_git/manifests -m 3271.xml

Build Image

Build Release Image

sudo ./scripts/build_release.sh -s <SOC> -v <VERSION>
Where
"-v : Image version" 00001~99999
"-s : 186 - Jetson TX2 NX"
"   : 194 - Jetson Xavier NX"
"   : 210 - Jetson Nano"

Build factory test image

sudo ./scripts/build_release_factory_test.sh -s 194 -v 00001

SOP:Factory_Board_Level_Test_for_EPC-R7200.pdf
Image:epcr7200_194_factory_20221130.tar.gz

Build Kernel

sudo ./scripts/build_kernel.sh -s <SOC> -v <VERSION>

nVidia : Build the Kernel

Enter Download Mode

Press following button + power ON, or

Enter following command in the device,

$ sudo reboot --force forced-recovery

Flash Image

Make sure your Host PC has installed following package:

$ sudo apt-get update
$ sudo apt-get install binutils device-tree-compiler libxml2-utils -y

Before flashing the image, power off the DUT, press recovery button and power on.
 MARK  : For the EPC-R7200 project, please add sudo in front of untar command to extracet the image.

	EPC-R7200
Xavier NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh jetson-xavier-nx-devkit-emmc mmcblk0p1
TX2 NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
Nano	$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh jetson-nano-devkit-emmc mmcblk0p1

Flash DTB

	EPC-R7200	AIR-020
Xavier NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb xavier-nx-epcr7200 mmcblk0p1
TX2 NX	$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb tx2-nx-epcr7200 mmcblk0p1
Nano	$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh -r -k DTB nano-epcr7200 mmcblk0p1

Test

Factory Test

$ git clone https://AIM-Linux@dev.azure.com/AIM-Linux/ELAA/_git/advtest-factory