RK Platform Fast Test

 

Preface

When sending samples to customer or test team (Lab、DQA etc) or releasing images, we need test all functions.

All functions are classified to three types:

• Full-automatic Test
• Semi-automatic Test
• Manual Test

Full-Automatic Test

Run test script and get the result automatically.

Support to test the following items:

• AIM Linux Applications
• AIM Linux Services
• AIM Timers
• Thermal
• NPU
• GPU
• VPU
• eMMC
• RTC

Preparation

• Insert network cable to DUT
• Open browser on DUT, then input "172.21.128.237"
• Login your account to connect to internet

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  /tools/test/adv/auto_test/auto_test.sh

Result

1. Failure

[ Failed ]: docker run hello-world; Please check net connection, or docker

2. Success

[ OK ]: docker run hello-world

Semi-Automatic Test

GPIO

Test script need two GPIOs, set one GPIO to output and the other to input.

Then set the output to 1, read whether the input is 1.

Then set the output to 0, read whether the input is 0.

Preparation

1. To get GPIO number from WIKI or User Mamual
2. Short two GPIOs your want to test

[ Note ]

DB5901、DB2510 GPIOs have multi-functions, change to GPIO mode.

Testing

For example:

To test ROM-5880's GPIO0 and GPIO1

Run the following command on DUT Terminal、ADB or Debug console:

  /tools/test/adv/gpio/gpio_test.sh 88 89

Result

1. Failure

[ Failed ]: gpio-test 88 89 Test Fail

2. Success

[ OK ]: gpio-test 88 89 Test Pass

CAN

Test script need two CANs, set one CAN as sender and the other as receiver.

Then send "123#55" from the sender, check whether the receiver get the same data.

Preparation

1. Short CAN0's CAN_L (PIN2 DB9) to CAN1's CAN_L (PIN2 DB9)
2. Short CAN0's CAN_H (PIN7 DB9) to CAN1's CAN_H (PIN7 DB9)

Testing

Run the following command on DUT Terminal、ADB or Debug console:

can0 is receiver, can1 is sender

/tools/test/adv/can/can_test.sh can0 can1

can1 is receiver, can0 is sender

/tools/test/adv/can/can_test.sh can1 can0

Result

1. Failure

[ Failed ]: canbus Test Fail

2. Success

[ OK ]: canbus Test Pass