RK Platform Fast Test

 

Preface

When sending samples to customer or test team (Lab、DQA etc) or releasing images, we need test all functions.

All functions are classified to three types:

• Full-automatic Test
• Semi-automatic Test
• Manual Test

Full-Automatic Test

Run test script and get the result automatically.

Support to test the following items:

• AIM Linux Applications
• AIM Linux Services
• AIM Timers
• Thermal
• NPU
• GPU
• VPU
• eMMC
• RTC

Preparation

• Insert network cable to DUT
• Open browser on DUT, then input "172.21.128.237"
• Login your account to connect to internet

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  /tools/test/adv/auto_test/auto_test.sh

Result

1. Failure

[ Failed ]: docker run hello-world; Please check net connection, or docker

2. Success

[ OK ]: docker run hello-world

Semi-Automatic Test

GPIO

Test script need two GPIOs, set one GPIO to output and the other to input.

Then set the output to 1, read whether the input is 1.

Then set the output to 0, read whether the input is 0.

Preparation

1. To get GPIO number from WIKI or User Mamual
2. Short two GPIOs your want to test

[ Note ]

DB5901、DB2510 GPIOs have multi-functions, change to GPIO mode.

Testing

For example:

To test ROM-5880's GPIO0 and GPIO1

Run the following command on DUT Terminal、ADB or Debug console:

  /tools/test/adv/gpio/gpio_test.sh 88 89

Result

1. Failure

[ Failed ]: gpio-test 88 89 Test Fail

2. Success

[ OK ]: gpio-test 88 89 Test Pass

UART

UART may support RS232 or RS485 mode, we use env "uart_mode" to change mode in RUNTIME.

We test RS232 in one port self-loop mode, RS485 in two port loop mode.

 

Preparation

• To get UART information(RS232 or RS485; 4-wire or 2-wire; Software Port Number etc) from WIKI or User Mamual
• Run the following command on DUT Terminal、ADB or Debug console to check env setting

 
        fw_printenv uart_mode

        # RS232: You will get the following information
        # Error: "uart_mode" not defined 
        # uart_mode=0x00

        # RS485: You will get the following information
        # uart_mode=0x0c
        

• To test RS232 mode, short TX to RX (PIN2 to PIN3 DB9) and CTS to RTS (PIN7 to PIN8 DB9)

RS232 Mode Testing

For example:

To test /dev/ttyS0

Run the following command on DUT Terminal、ADB or Debug console:

4-wire

 

/tools/test/adv/uart/rs232_4_wire_test.sh /dev/ttyS0

2-wire

 

/tools/test/adv/uart/rs232_2_wire_test.sh /dev/ttyS0

Result

1. Failure

[ Failed ]: uart-test /dev/ttyS0 Test Fail

2. Success

[ OK ]: uart-test /dev/ttyS0 Test Pass

CAN

Test script need two CANs, set one CAN as sender and the other as receiver.

Then send "123#55" from the sender, check whether the receiver get the same data.

Preparation

1. Short CAN0's CAN_L (PIN2 DB9) to CAN1's CAN_L (PIN2 DB9)
2. Short CAN0's CAN_H (PIN7 DB9) to CAN1's CAN_H (PIN7 DB9)

Testing

Run the following command on DUT Terminal、ADB or Debug console:

can0 is receiver, can1 is sender

/tools/test/adv/can/can_test.sh can0 can1

can1 is receiver, can0 is sender

/tools/test/adv/can/can_test.sh can1 can0

Result

1. Failure

[ Failed ]: canbus Test Fail

2. Success

[ OK ]: canbus Test Pass

I2C PIN Header

Using EG70 Test Board to read I2C flash.

Preparation

1. Insert EG70 Test Board to DUT

[ Note ]

EG70 support multi I2C address(0x50, 0x51 ...), change to correct address.

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  

/tools/test/adv/i2c/iic_pin_test.sh 4 0x50

Result

1. Failure

[ Failed ]: iic pinheader Test Fail

2. Success

[ OK ]: iic pinheader Test Pass

SPI PIN Header

Using EG70 Test Board to read SPI flash.

Preparation

1. Insert EG70 Test Board to DUT

[ Note ]

DB2510 SPIs have multi-functions, change to SPI PIN Header.

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  

/tools/test/adv/spi/spi_test.sh mtd0

If test 2 SPI PIN Headers at the same time:

  

/tools/test/adv/spi/spi_test.sh mtd1

Result

1. Failure

[ Failed ]: SPI mtd0 Test Fail

2. Success

[ OK ]: SPI mtd0 Test Pass

LAN

Ping www.baidu.com 10 times with no packet loss.

Preparation

1. Insert network cable

Testing

Run the following command on DUT Terminal、ADB or Debug console:

eth0

  

/tools/test/adv/net/net_test.sh eth0

eth1

  

/tools/test/adv/net/net_test.sh eth1

Result

1. Failure

[ Failed ]: net-test eth0 Test Fail

2. Success

[ OK ]: net-test eth0 Test Pass

WIFI

Ping www.baidu.com 10 times with no packet loss.

Preparation

1. Insert WIFI module and antenna
2. Connect to Hotspot (eg: Advantech for guest) on DUT

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  

/tools/test/adv/net/net_test.sh wlan0

Result

1. Failure

[ Failed ]: net-test wlan0 Test Fail

2. Success

[ OK ]: net-test wlan0 Test Pass

4G/5G

Ping www.baidu.com 10 times with no packet loss.

Preparation

1. Insert 4G/5G module with antenna and SIM card
2. Configurate "Mobile Broadband connection" on DUT according User Manual or WIKI.

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  

/tools/test/adv/net/net_test.sh wwan0

Result

1. Failure

[ Failed ]: net-test wwan0 Test Fail

2. Success

[ OK ]: net-test wwan0 Test Pass

Manual Test

Watchdog

Test script enable watchdog, eat it 100 times then let it alone.

Run test script, watch DUT weither reboot.

Testing

Run the following command on DUT Terminal、ADB or Debug console:

/tools/test/adv/watchdog/wdt /dev/watchdog 20

Result

1. Failure

DUT cann't reboot after 20s.

2. Success

DUT reboot after 20s.

Audio

Project may support mutli sound cards. Need manually to check whether it works well.

When testing record, first record, then play the audio just recorded.

Preparation

1. Insert sound Board to DUT
2. Insert necessary cable and accessories（speaker、microphone etc）
3. Run the following command on DUT Terminal、ADB or Debug console to get sound card number:

  
cat /proc/asound/cards

0 [rockchiphdmi   ]: rockchip_hdmi - rockchip,hdmi
rockchip,hdmi
1 [rockchiprt5640c]: rockchip_rt5640 - rockchip,rt5640-codec
rockchip,rt5640-codec

Testing

Run the following command on DUT Terminal、ADB or Debug console:

For example to test sound card 1

/tools/test/adv/audio/audio_record_test.sh 1
/tools/test/adv/audio/audio_play_test.sh 1

Result

1. Failure

Cann't play the recorded audio well

2. Success

Can play the recorded audio well

Camera

Using EG58 Test Board to preview on DUT display.

Video Port

 

 

RK3588

ROM-6881

Camera Num	Video Port	Note
Camera 1	44	(I2C 4)  2 Lane
Camera 2	62	(I2C 3)  4 Lane
Camera 3	53	On Core Board CN1 (I2C 5) 4 Lane
Camera 4	71	On Core Board CN2 (I2C 8)  4 Lane

Preparation

1. Insert EG58 Test Board to DUT
2. Insert LCD panel
3. To get camera port from WIKI or User Mamual

[ Note ]

DB5901、DB2510 GPIOs have multi-functions, change to Camera mode.

If setting multi-display, insert all LCD panel.

 

Testing

Run the following command on DUT Terminal、ADB or Debug console:

  

# 44 is camera port, need change according project
/tools/test/adv/camera/camera_rkaiq_tesh.sh 44

 

Result

1. Failure

Cann't see preview interface on DUT display.

2. Success

Can see preview interface on DUT display.