ROM-6881 How to configurate Static IP

From ESS-WIKI
Jump to: navigation, search

Ethernet

ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example.

  1. The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1.

Configure to Static IP

1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.

ROM-6881 Eethernet.png

2. Double-click “Wired Connection 1” to configure it.

ROM-6881 Ethernet wired connection.png

Configure to DHCP

1. Click “Applications” -> “Settings -> “Advanced Network Configration”.

ROM-6881 Network.png

2. Double-click “Wired Connection 1” to configure it.

ROM-6881 Ethernet IPV4.png

Ethernet Test

After connection, Ethernet will create a net point “eth0” and “eth1”. 

# #---- Test eth0 ----# #
# ping –I eth0 www.advantech.com
# #---- Test eth1 ----# #
# ping –I eth1 www.advantech.com
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-6881_How_to_configurate_Static_IP&oldid=33369"