Ethernet Test（ROM-5880）

STEP 1 : Entry Start-> Preferences-> Network Connections.

STEP 2 : Double-click “Wired Connection 1” to configure it.

Or set it in the terminal using ifconfig, such as setting its IP address to 192.168.1.1

root@linaro-alip:~# ifconfig eth0 192.168.1.1
root@linaro-alip:~# ifconfig eth0
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast
192.168.1.255
ether c6:df:8b:79:17:3f txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 35