View source for MI3.1 Standard Image V1.0.1 Porting SOP

=Prepare=
#Ubuntu 14.04 x64 develop host installed with MI3.1 WindRiver workbench
#4GB USB Flash
#Porting Target ( ex: UTX-3115 )

=SOP for Porting=
#MI3.1_Pro_Config_V1.sh barytail 0014
#make fs
#sudo ./deploy.sh -u -f ./export/intel -d /dev/sdx -y; sync
#Insert Target platform and boot up  -> root/root
#copy modem_cell_default to /etc/.
#copy usb-modem.sh to /
#copy ar3k.zip to /lib/firmware/ & unzip ar3k.zip
#RD Verify & HW Functional Test
#sudo dd if=/dev/sdm of=./IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img bs=4M; sync
#md5sum IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img > IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img.md5
#gzip IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img
#md5sum IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img.gz > IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img.gz.md5

=Double Confirm=
#gunzip IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img	
#dd if=./IDP_MI3.1_7.0.0.14_x64_ARK-1123H_V1.0.1_20160530.img of=/dev/sdx bs=4M; sync
#Insert Target platform and boot up

=Note=
== BIOS Setting for Baytrail and Haswell platforms ==
#BIOS -> Advanced / Miscellaneous Configuration / OS Selection -> Windows 8.X  
#MI3.1 image needs boot from UEFI mode => Boot / Boot mode select [UEFI]
#If user want to support Secure boot => Please disable CSM and enable Secure boot in BIOS setting.

==For Quark Memeory Configuration==       
./layers/wr-bsps/intel-quark/recipes-support/spi-layout-tools/files/platform-data/clantonhill-platform-data.ini