View source for Using RKTool for ASR-A501.


=== '''For example, the PC used is a laptop. The specifications are as follows：''' ===

<span style="background:white"><span style="color:#002060">[[File:PC specification.png|RTENOTITLE]]</span></span>

<font color="#002060">Decompress the downloaded image on the PC.</font>

=== '''Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:''' ===

[[File:ASR-A501 OTG 1.png|RTENOTITLE]]

[[File:ASR-A501 OTG RK v5.13.png|RTENOTITLE]]

[[File:ASR-A501 OTG v5.13.png|RTENOTITLE]]
<div>Change Tool language in config.ini, please change "Selected: to "2"</div> 
选择工具语言:Selected=1(中文)<--Chinese&nbsp;;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\

[[File:RSB-4810 set language method configini.PNG|RTENOTITLE]]

=== '''Go to the RKDevTool_Release folder and run the RKDevTool.exe program.''' ===

[[File:ASR-A501 OTG Step2 RKDevTool.png|RTENOTITLE]]

'''Note: Please ensure that the path for burning the file is correct.'''

[[File:ASR-A501 OTG Step2.1.png|RTENOTITLE]]

[[File:ASR-A501 OTG Step 2.png|RTENOTITLE]]

=== '''Hardware Pin Definition：''' ===

{| border="1" cellpadding="1" cellspacing="1"
|-
| colspan="2" | '''CAN/DEBUG Connector'''
|-
| '''Pin'''
| '''Pin Name'''
|-
| 1
| TX_DEBUG
|-
| 2
| RX_DEBUG
|-
| 3
| GND
|-
| 4
| GND
|-
| 5
| CAN2_H
|-
| 6
| CAN2_L
|-
| 7
| CAN1_H
|-
| 8
| CAN1_L
|}

=== &nbsp; ===

'''Debugging wiring method for cables.（Debug cable Number：1700035538-01&nbsp;）'''

TX——>DB9 Pin 3, RX——>DB9 Pin2, GND——>DB9 Pin5

&nbsp;

'''The test environment is set up as follows:'''

[[File:ASR-A501 OTG Step3.png|RTENOTITLE]]

[[File:ASR-A501 OTG Step3.1.png|RTENOTITLE]]

[[File:ASR-A501 OTG Step3.2.png|RTENOTITLE]][[File:ASR-A501 OTG J1.png|RTENOTITLE]]

=== '''Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.''' ===

'''Method 1:''' After powering on and starting up, press "Ctrl+C" to enter "u-boot", input the "rbrom" command, and enter the MASKROM mode.

'''Debian ：'''
<pre>Hit any key to stop autoboot: 0
rkboot # <INTERRUPT>
rkboot # rbrom</pre>

[[File:ASR-A501 OTG Step4.png|RTENOTITLE]]

'''Method Two: '''Press the "MASKROM" button, then power on and turn on the device, and it will directly enter the MASKROM mode.

[[File:ASR-A501 OTG Step4.1.png|RTENOTITLE]]

[[File:ASR-A501 MASKrom Button.png|RTENOTITLE]]

[[File:ASR-A501 OTG Step4.2.png|RTENOTITLE]]

[[File:ASR-A501 OTG Step4.3.png|RTENOTITLE]]

=== '''After burning, open putty to check the image version.''' ===

[[File:ASR-A501 OTG Step5.png|RTENOTITLE]]

[[File:ASR-A501 OTG Step5.1.png|RTENOTITLE]]