View source for IDP Qualification/Installation 3.0

=Install the Diagnostics Tool on the Gateway=
1. Power on your gateway and login using root as both the user ID and the password<br />

2. If you are behind your corporate firewall, you may need to set up a proxy. Contact your IT department for your proxy IP address and port. <br />
:Then set it up on your gateway, :replacing proxy server IP address:port with the IP address and port for your proxy:
 export http_proxy=http://proxy server IP address:port
 
 '''<big>Note: Your system need 250MB free size in "/". Check by "#df -h".<br /> 
 How to extend your target size.</big> R<big>efer to [[File System]] - Re-size your file system</big>'''

3. Install the Diagnostics Tool on your gateway:
 smart channel --add diag type=rpm-md name=diag_REPO baseurl=http://
 198.175.66.251/WRL/7/extras
 smart update diag
 smart install diag

 Note: Folder under /opt/Intel/Diagnostics/gateway/HostScripts/UNIX/opt/intel/qualification/
       README.TXT: Basic test information, test procedures, and test categories.

=Install the Diagnostics Tool on the Windows ( UI Computer )=
1. Copy the gateway directory /opt/Intel/Diagnostics/UI-Windows-Installer from the gateway to the USB flash drive:
 Note: When the USB flash drive is inserted into the gateway, the FAT32 partition will be auto-mounted at mount point /media/sdX1, where X represents the USB flash drive

2. Copy UI-Windows-Installer from the USB flash drive to a directory on the UI Computer.<br />

3. On the UI Computer, use administrator privileges to open a command prompt window. ( You must install with administrator privileges. )<br />

4. Change to the UI-Windows-Installer directory on the UI Computer.<br />

5. While still at the command prompt, type InstallHealthCheck.bat and press Enter.<br />

6. When the installation completes, click Finish<br />

7. Require to Install .NET Framework Version 4.5<br />

8. Type Intel.Gateway.Health.Check.UI.Setup.msi and press Enter. The Diagnostics User Interface loads.

=Running Diagnostics Tools=
==Start Diagnostics Console Program on Gateways==
1. Login to the gateway using root as both the username and password<br />
2. Start the diagnostics agent:
 diag

==Run Automated Tests==
1. On your UI Computer, go to C:\Program Files (x86)\Intel\Intel Gateway HealthCheck UI.<br />
2. Run Intel.Gateway.Health.Check.UI.exe
 Note: If you do not see a gateway listed, either that gateway is on a different subnet, or you did not complete Start Diagnostics Console Program on
       Gateways. If you completed the steps above and do not see a connected gateway in the list, see Manually Discovering Gateways

Please reference to [[Media:561994 Intel IoT Gateway Diagnostic Tool.pdf|<big>IDP Diagnostic Tool-2015-11</big>]]. Page 10 ~ 13

=Viewing Detailed Result=
Detailed test results can be viewed on the gateway using the following steps.<br />

1. Connect a keyboard and monitor to the gateway.<br />
2. Login using root as both the user ID and the password.<br />
3. View test results by viewing the text files in directory '''<big>/opt/Intel/Diagnostics/gateway/HostScripts/UNIX/opt/intel/qualification/.assets/log</big>'''