View source for IoTGateway/BSP/Android/Android 6.0.1 2.1.0 MFG TOOL

= Enter recovery mode =

=== ROM-5420 ===

:Set the correct boot mode, then power on.
:[[File:Rom5420-mfgtool.jpg|200px|Rom5420-mfgtool.jpg]]

=== ROM-3420 ===

:Set eng mode,then power on(1-off,2-on)
:[[File:Rom3420-mfgtool.jpg|200px|Rom3420-mfgtool.jpg]]

=== ROM-7421 DP/ROM-7421 QP/ROM-7421 SOLO ===

:Set eng mode,then power on(1-off,2-on)
:[[File:Rom7421-mfgtool.jpg|200px|Rom7421-mfgtool.jpg]]

=== UBC-220 ===

:Set eng mode,then power on(1-off,2-on)
:[[File:UBC220-mfgtool.jpg|200px|UBC220-mfgtool.jpg]]

=== ROM-7420 ===

:Set the correct boot mode, then power on.
:[[File:Rom7420-mfgtool.jpg|200px|Rom7420-mfgtool.jpg]]

=== Other Projects ===

:Set eng mode,then power on(1-off,2-on)
:[[File:Other project mfgtool.jpg|200px|Other project mfgtool.jpg]]

= Connect the OTG to the PC =

:After connecting to PC, a HID-compliant device will be shown in the Device
:[[File:Dm mfgtool.jpg|500px|Dm mfgtool.jpg]]

= Modify config file =

== Modify cfg.ini ==

:mfgtools/cfg.ini

=== RSB4411 Update SD ===

 [profiles]
 chip = Linux
 
 [platform]
 board = Android
 
 [LIST]
 name = ADV u-boot
 
 [variable]
 dtb = imx6q-rsb4411-a1
 mmc = 1

=== RSB4411 Update EMMC ===

 [profiles]
 chip = Linux
 
 [platform]
 board = Android
 
 [LIST]
 name = ADV u-boot
 
 [variable]
 dtb = imx6q-rsb4411-a1
 mmc = 0

= Copy update image and uboot to android folder =

For example&nbsp;: RSB-4411 (2017_03_01 Release version)

*Copy u-boot_crc.bin.crc , u-boot_crc.bin, boot.img , revocery.img ,system.img to 4411AIV6004_DualQuad_2017-03-01_MFG_tool\Profiles\Linux\OS Firmware\files\android\ .

*PS: Please remenber use the simg2img tools converts the sparse system image to raw system image on the Linux OS host computer. The pull the system immage to folder.

= Running mfgtool and update =

running the MfgTool2.exe and update

:[[File:Mfgtool.jpg|400px|Mfgtool.jpg]]

#If you can’t running mfgtool2.exe, you can check MfgTool.log
#Click “Start”,you can get information form debug console
#:[[File:Mfg pass.jpg|600px|Mfg_pass.jpg]]
#After update finish,it will be shown below
#:[[File:Mfgtool2.jpg|400px|Mfgtool2.jpg]]
#Click “Exit” to terminate the application.