View source for ROM-6881 Usering bootup sd disk made by SDDiskTool.


=== '''Step1 Using DebianTool to create update.img''' ===

1. Put image to&nbsp;DebianTool\rockdev\image

[[File:ROM-6881 RKTool image.png|800x600px]]

2. Double click mkupdate.bat. in&nbsp;&nbsp;DebianTool\rockdev

[[File:ROM-6881 mkupdate.png|800x600px]]

[[File:ROM-6881 mkupdate 1.png|800x600px]]

Then you can find update.img in&nbsp;DebianTool\rockdev.


=== '''Step 2&nbsp;:&nbsp;Create update SD&nbsp;(Red word).''' ===

1．Choose the SD device.

2．Choose the "firmware update"

3．Choose the update.img path

4．Create the update SD

[[File:ROM-6881 ruixinwei sd.png]]

[[File:ROM-6881 ruixinwei sd1.png]]

Create the Update SD card Success.

[[File:ROM-6881 ruixinwei sd success.png]]


=== '''Step 3：Insert the SD card into the SD card slot of SOM-DB2510.''' ===

1. 将SOM-DB2510的SDIO跳帽设置（金手指P34/P35/P36/P39/P40/P41/P42）

{| border="1" cellpadding="1" cellspacing="1" style="width: 535px;"
|-
| '''SOM-DB2510 Jumper Setting'''
| style="width: 193px;" | '''Behaviour Modeling'''
|-
| 
J15/J16/J17/J18/J19/J20/J21 （2-3）（默认配置）

CN3 default：2-3

| style="width: 193px;" | SDIO切换到底板SD接口
|-
| J15/J16/J17/J18/J19/J20/J21（1-2）
| style="width: 193px;" | SDIO切换到底板M.2接口
|}

[[File:ROM-6881 for SOM-DB2510 Jumper setting sd or m.2.png]]


=== '''Step 4：上电开机，SD卡自动update image.''' ===

[[File:ROM-6881 remove SD card.png]]


=== '''Step 5：烧录完毕后，查看镜像版本信息.''' ===

[[File:ROM-6881 success OS.png]]