Revision as of 02:37, 23 May 2018

Introduction

This document will 

EPD-EVK_BmpToPixel_D73

Preparation

• EVK Components

• 2.4G Wi-Fi AP

Prepare a 2.4G Wi-Fi AP.

• Win7 PC

Prepare a win7 PC.

• Setup TFTP server

1. Make sure PC connect to 2.4G Wi-Fi AP and get IP address
2. Recommend used tftpd64
3. Set the process reference link  https://www.youtube.com/watch?v=YdVEonLMWYs

• Python Environment Setup

1. Download and install Python (recommend Python version 2.7+)
2. Setup Windows Path and Environment Variables : add “C:\Python27;C:\Python27\Scripts”  
3. Download and install python PIL package
4. Download and unzip picture transformation tool "BmpToPixel_D73.py"

Bmp Image To EPD Format

1. Run BmpToPixel_D73.py < source BMP image file> < <output file > in cmd window
   • Bmp size must comply with EPD resolution 1600 x 1200
   • Bmp file: mono color/16 color/256 color/24bits bitmap format
   • Ex: BmpToPixel_D73.py EVK_03.bmp EVK_03.esl
2. Copy output files to tftp Base Directory 

WISE-ED22 Setup

1. Download and install WISE-ED22 driver
2. Connected to PC via a micro USB cable, the Device  Manager will appear mbed Serial Port

EVK Setup

Hardware Setup

       Follow steps and picture below to setup the hardware

1. Connected EPD FPC to mainboard
2. Connected Wi-Fi antenna to mainboard
3. Connected ED22 board to mainboard via FFC cable
4. Connected ED22 board to PC via micro USB cable
5. Connected power cable to mainboard

Command Console Setting

Start a serial tool(use tera term in this), and make the communication setting as shown below.

[[Category:Editor]]