Difference between revisions of "AlarmEvent"
From ESS-WIKI
| Line 36: | Line 36: | ||
*subtype: Event subtype | *subtype: Event subtype | ||
*event: | *event: | ||
| − | *#severity: | + | *#severity: Emergency = 0 ,Warning = 4 |
| − | + | *#msg_code: Device output code | |
| − | + | *#msg: Output code express message | |
| − | + | *#error_code: Output code express error code | |
| − | + | *#extmsg: Externel event message | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
*server: MQTT broker ip | *server: MQTT broker ip | ||
*server_port: MQTT broker port | *server_port: MQTT broker port | ||
Revision as of 07:43, 23 November 2018
Contents
Introduction
Alarm Event
How to
Software Requirements
- MQTT broker V1.0.3
- EI Agent
- Agent_Modbus_Handler_2.0.1-rc2
Installation
1.Double click AlarmEvent-X.X.X.exe to install.
2.Click "Next" to continue the setup wizard.
3.Select installation folder then click "Next"
4.Click "Next" to begin the installation
5.Complete the installation, click "Finish" to exit the setup wizard
6.Edit event_config.json (if need)
7.Restart device
Configuration
event_config.json (location: C:\Program Files (x86)\Advantech\AlarmEvent\config)
- handler_name: Subcribe handler name
- tag_name: Subcribe tag name
- subtype: Event subtype
- event:
- severity: Emergency = 0 ,Warning = 4
- msg_code: Device output code
- msg: Output code express message
- error_code: Output code express error code
- extmsg: Externel event message
- server: MQTT broker ip
- server_port: MQTT broker port
{
"handler_name":"Modbus_Handler",
"tag_name":"Error_Code",
"subtype":"TC_AC",
"event":
{
"1": {"severity":0, "msg_code":241, "msg":"Door Open","error_code": "E:0030", "extmsg":"Immediate stop: Enclosure door open"},
"2": {"severity":4, "msg_code":242, "msg":"Door Open", "error_code": "A:0030","extmsg":"Warning: Enclosure door open"},
"3": {"severity":4, "msg_code":250, "msg":"CAB FTR DP ALM","error_code": "A:0031", "extmsg":"Warning: Cabinet filter differential pressure"},
"4": {"severity":0, "msg_code":321, "msg":"Oil level","error_code": "E:0040", "extmsg":"Immediate stop: Oil level alarm"},
"5": {"severity":4, "msg_code":322, "msg":"Oil level alarm","error_code": "A:0040", "extmsg":"Warning: Oil level high"},
"6": {"severity":0, "msg_code":401, "msg":"RD alarm","error_code": "E:0050", "extmsg":"Immediate stop: Refrigerant dryer"},
"7": {"severity":4, "msg_code":402, "msg":"RD alarm","error_code": "A:0050", "extmsg":"Warning: Refrigerant dryer"},
"8": {"severity":0, "msg_code":481, "msg":"Belt drive SERV","error_code": "E:0060", "extmsg":"Immediate stop: Belt drive service"},
"9": {"severity":0, "msg_code":561, "msg":"Fan MTR IMM stop","error_code": "E:0070", "extmsg":"Immediate stop: Fan motor trip"}
},
"server":"127.0.0.1",
"server_port": 3000
}