Difference between revisions of "Edge Sense LoRa Module Firmware Upgrade"

From ESS-WIKI
Jump to: navigation, search
(.)
(.)
Line 34: Line 34:
  
 
<span style="font-size:larger;">Step1 - Insert cable to LoRa module</span>
 
<span style="font-size:larger;">Step1 - Insert cable to LoRa module</span>
 +
 +
<span style="font-size:larger;">[[File:RYLRxxE connect1.jpg]]</span>
 +
 +
<span style="font-size:larger;">[[File:RYLRxxE connect2.jpg]]</span>
  
 
<span style="font-size:larger;">Step 2 - Open STM32 ST-LINK Utility and select hex file for RYLRxxE&nbsp;(ex: RYLRxx<span style="color:#FF0000;">E</span>_V0.1.16.hex) to program flash.</span>
 
<span style="font-size:larger;">Step 2 - Open STM32 ST-LINK Utility and select hex file for RYLRxxE&nbsp;(ex: RYLRxx<span style="color:#FF0000;">E</span>_V0.1.16.hex) to program flash.</span>

Revision as of 09:25, 13 December 2018

Requirements

ST-LINK/V2

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.

RTENOTITLE

https://www.st.com/en/development-tools/st-link-v2.html

STM32 ST-Link Utility

STM32 ST-LINK Utility (STSW-LINK004) is a full-featured software interface for programming STM32 microcontrollers.

This utility is available at http://www.st.com/en/development-tools/stsw-link004.html

RYLRxxP

Step1 - Insert cable to LoRa module

Step 2 - Open STM32 ST-LINK Utility and select hex file for RYLRxxP (ex: RYLRxxP_V0.2.9.hex) to program flash.

RYLRxx6

RTENOTITLE

Step1 - Insert cable to LoRa module

RTENOTITLE

Step 2 - Open STM32 ST-LINK Utility and select hex file for RYLRxx6 (ex: RYLRxx6_V0.2.10.hex) to program flash.

RYLRxxE

Step1 - Insert cable to LoRa module

RYLRxxE connect1.jpg

RYLRxxE connect2.jpg

Step 2 - Open STM32 ST-LINK Utility and select hex file for RYLRxxE (ex: RYLRxxE_V0.1.16.hex) to program flash.

RYLRxx2

Step1 - Insert cable to LoRa module

Step 2 - Open STM32 ST-LINK Utility and select hex file for RYLRxx2 (ex: RYLRxx2_V0.2.4.hex) to program flash.

Programming via STM32 ST-Link Utility

Step1 - Connect device

Step2 - Select hex file

RTENOTITLE

Step3 - click "Program verify" button

RTENOTITLE

Step4 - Click "Start"

RTENOTITLE

Reference

  • Lora程式更新與燒錄法 V0.93.pdf