Difference between revisions of "IoTGateway/BSP/Linux/iMX8/Build Instructions"
From ESS-WIKI
| Line 3: | Line 3: | ||
= ROM-7720 = | = ROM-7720 = | ||
| − | == <span style="color:#0070c0">Build Instructions (based on | + | == <span style="color:#0070c0">Build Instructions (based on Freescale i.MX BSP L4.14.78_1.0.0_GA)</span> == |
Please refer to [https://git-scm.com/book/en/v2/Customizing-Git-Git-Configuration this link] to set Git configuration first. | Please refer to [https://git-scm.com/book/en/v2/Customizing-Git-Git-Configuration this link] to set Git configuration first. | ||
Revision as of 11:30, 8 April 2019
ROM-7720
Build Instructions (based on Freescale i.MX BSP L4.14.78_1.0.0_GA)
Please refer to this link to set Git configuration first.
$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-linux-morty -m imx-4.9.51-8qm_beta2.xml$ repo sync$ MACHINE=imx8qmrom7720a1 DISTRO=fsl-imx-x11 source ./fsl-setup-release.sh -b build-x11$ export LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8$ bitbake fsl-image-qt5-validation-imx
- While bitbake is done, the compressed image file, "fsl-image-qt5-validation-imx-imx8qmlpddr4arm2.sdcard.bz2", is located on the "tmp/deploy/images/imx8qmlpddr4arm2/" under the yocto base directory.
To create one bootable SD card
Please use the following command to flash the SD card:
$ bunzip2 -c fsl-image-qt5-validation-imx-imx8qmlpddr4arm2.sdcard.bz2 | sudo dd of={SDCARD_device_name} bs=1M