Difference between revisions of "IoTGateway/BSP/Linux/iMX8/Build Instructions"
From ESS-WIKI
| Line 17: | Line 17: | ||
:While bitbake is done, the compressed image file, "fsl-image-qt5-validation-imx-imx8qmrom7720a1.sdcard.bz2", is located in the "tmp/deploy/images/imx8qmrom7720a1/" under the yocto base directory. | :While bitbake is done, the compressed image file, "fsl-image-qt5-validation-imx-imx8qmrom7720a1.sdcard.bz2", is located in the "tmp/deploy/images/imx8qmrom7720a1/" under the yocto base directory. | ||
| + | === <font color="#0070c0">Hardware setting : </font> === | ||
| + | <font color="#0070c0"></font> | ||
| + | Switch configuration: | ||
| + | |||
| + | 2-3-4 is on for SD | ||
| + | |||
| + | 4 is on for eMMC | ||
| + | <font color="#0070c0"></font> | ||
=== <span style="color:#0070c0">To create one bootable SD card</span> === | === <span style="color:#0070c0">To create one bootable SD card</span> === | ||
Revision as of 09:19, 7 May 2019
Contents
ROM-7720
Build Instructions (based on Freescale i.MX BSP L4.14.78_1.0.0_GA)
Please refer to this link to set Git configuration first.
$ repo init -u git://github.com/ADVANTECH-Corp/adv-arm-yocto-bsp.git -b imx-linux-sumo -m imx-4.14.78-1.0.0_ga.xml$ repo sync$ DISTRO=fsl-imx-xwayland MACHINE=imx8qmrom7720a1 source ./fsl-setup-release.sh -b build-xwayland$ export LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8$ bitbake fsl-image-qt5-validation-imx
- While bitbake is done, the compressed image file, "fsl-image-qt5-validation-imx-imx8qmrom7720a1.sdcard.bz2", is located in the "tmp/deploy/images/imx8qmrom7720a1/" under the yocto base directory.
Hardware setting :
Switch configuration:
2-3-4 is on for SD
4 is on for eMMC
To create one bootable SD card
Please use the following command to flash the SD card:
$ bunzip2 -c fsl-image-qt5-validation-imx-imx8qmrom7720a1.sdcard.bz2 | sudo dd of={SDCARD_DEVICE_NAME} bs=1M