|
|
(101 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
− | = System Architecture: = | + | = System Architecture = |
| | | |
| [[File:Rohm light tower sensor demokit 01.png|640x480px|Rohm light tower sensor demokit 01.png]] | | [[File:Rohm light tower sensor demokit 01.png|640x480px|Rohm light tower sensor demokit 01.png]] |
Line 7: |
Line 7: |
| [[File:EnOcean light sensor 01.png|480x280px|EnOcean light sensor 01.png]] | | [[File:EnOcean light sensor 01.png|480x280px|EnOcean light sensor 01.png]] |
| | | |
− | = Sensor Communication Protocol: = | + | <br/><span style="font-size:large;"><span style="color:#FF0000;">Notice: Please make sure DIP switch of Light Tower module is setting in normal mode as below diagram.</span></span> |
| + | |
| + | [[File:Tower Light normal mode.jpg|RTENOTITLE]] |
| + | |
| + | = Sensor Communication Protocol = |
| | | |
| [[File:EnOcean light sensor 03.png|480x100px|EnOcean light sensor 03.png]] | | [[File:EnOcean light sensor 03.png|480x100px|EnOcean light sensor 03.png]] |
Line 13: |
Line 17: |
| Lighting Condition Data Format: | | Lighting Condition Data Format: |
| | | |
− | First 4 bits = pervious status | + | *First 4 bits = pervious status |
− | | + | *Last 4 bits = current status |
− | Last 4 bits = current status | |
| | | |
| Lighting Condition Value Definition: | | Lighting Condition Value Definition: |
| | | |
− | 0x0 Light off | + | *0x0 Light off |
| + | *0x1 Fast blink (0.5s per blink) |
| + | *0x2 Blinking medium speed (1s per blink) |
| + | *0x3 Slow flashing (2s per blink) |
| + | *0x4 Light on |
| | | |
− | 0x1 Fast blink (0.5s per blink)
| + | For example, value of third light is 41. |
| | | |
− | 0x2 Blinking medium speed (1s per blink)
| + | *First 4 bits is 4 , which mean previous status is Light On |
| + | *Last 4 bits is 1 , which mean current status is Fast Blink. |
| | | |
− | 0x3 Slow flashing (2s per blink)
| + | = Tower Light Data Format = |
− | | |
− | 0x4 Light on
| |
− | | |
− | = Tower Light Data Format: = | |
| | | |
| [[File:EnOcean light sensor 02.png|480x320px|EnOcean light sensor 02.png]] | | [[File:EnOcean light sensor 02.png|480x320px|EnOcean light sensor 02.png]] |
Line 35: |
Line 39: |
| | | |
| | | |
− | = EnOcean Sample Program: =
| + | = Protocol Specification = |
− | | |
− | [[File:EnOcean light sensor 04.png|640x180px|EnOcean light sensor 04.png]]
| |
− | | |
− | | |
− | | |
− | = Data type and Data Format: =
| |
− | | |
− | '''Agent ID (Sensor ID):''' String
| |
− | | |
− | '''Sensor Data:''' Unsigned Integer number
| |
− | | |
− | = Data Capability in JSON: =
| |
− | | |
− | {
| |
− | "susiCommData":{
| |
− | "infoSpec":{
| |
− | "SenHub":{
| |
− | "SenData":{
| |
− | "e":[
| |
− | {
| |
− | "n":"Header",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":255,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"ExtendedTelegramType",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":255,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"OriginatorID",
| |
− | "u":"",
| |
− | "sv":"",
| |
− | "min":0,
| |
− | "max":0,
| |
− | "asm":"r",
| |
− | "type":"s",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"FwVersion",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":255,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"PacketType",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":15,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"ActionMode",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":15,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"PacketIndex",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":255,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"TxType",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":15,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"BatteryVoltage",
| |
− | "u":"",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":15,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"Light1",
| |
− | "u":"State",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":4,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"Light2",
| |
− | "u":"State",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":4,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"Light3",
| |
− | "u":"State",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":4,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"Light4",
| |
− | "u":"State",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":4,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"SignalStrength",
| |
− | "u":"dBm",
| |
− | "v":0,
| |
− | "min":0,
| |
− | "max":255,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | }
| |
− | ],
| |
− | "bn":"SenData"
| |
− | },
| |
− | "Info":{
| |
− | "e":[
| |
− | {
| |
− | "n":"Name",
| |
− | "u":"",
| |
− | "sv":"LightSensor",
| |
− | "min":0,
| |
− | "max":0,
| |
− | "asm":"r",
| |
− | "type":"s",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"sw",
| |
− | "u":"",
| |
− | "sv":"1.0.00",
| |
− | "min":0,
| |
− | "max":0,
| |
− | "asm":"r",
| |
− | "type":"s",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | }
| |
− | ],
| |
− | "bn":"Info"
| |
− | },
| |
− | "Net":{
| |
− | "e":[
| |
− | {
| |
− | "n":"sw",
| |
− | "u":"",
| |
− | "sv":"2.0.0.0",
| |
− | "min":0,
| |
− | "max":0,
| |
− | "asm":"r",
| |
− | "type":"s",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"Neighbor",
| |
− | "u":"",
| |
− | "sv":"",
| |
− | "min":0,
| |
− | "max":0,
| |
− | "asm":"r",
| |
− | "type":"s",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | },
| |
− | {
| |
− | "n":"Health",
| |
− | "u":"",
| |
− | "v":100,
| |
− | "min":0,
| |
− | "max":0,
| |
− | "asm":"r",
| |
− | "type":"d",
| |
− | "rt":"",
| |
− | "st":"ipso",
| |
− | "exten":""
| |
− | }
| |
− | ],
| |
− | "bn":"Net"
| |
− | },
| |
− | "Action":{
| |
− | "e":[
| |
− |
| |
− | ],
| |
− | "bn":"Action"
| |
− | },
| |
− | "ver":1
| |
− | }
| |
− | },
| |
− | "commCmd":2052,
| |
− | "requestID":2001,
| |
− | "agentID":"0017000004016943",
| |
− | "handlerName":"general",
| |
− | "sendTS":160081024
| |
− | }
| |
− | }
| |
− | | |
− | = Data Upload Format in JSON: =
| |
− | | |
− | {
| |
− | "susiCommData":{
| |
− | "data":{
| |
− | "SenHub":{
| |
− | "SenData":{
| |
− | "e":[
| |
− | {
| |
− | "n":"Header",
| |
− | "v":47
| |
− | },
| |
− | {
| |
− | "n":"ExtendedTelegramType",
| |
− | "v":7
| |
− | },
| |
− | {
| |
− | "n":"OriginatorID",
| |
− | "sv":"000004016943"
| |
− | },
| |
− | {
| |
− | "n":"FwVersion",
| |
− | "v":1
| |
− | },
| |
− | {
| |
− | "n":"PacketType",
| |
− | "v":0
| |
− | },
| |
− | {
| |
− | "n":"ActionMode",
| |
− | "v":0
| |
− | },
| |
− | {
| |
− | "n":"PacketIndex",
| |
− | "v":195
| |
− | },
| |
− | {
| |
− | "n":"TxType",
| |
− | "v":1
| |
− | },
| |
− | {
| |
− | "n":"BatteryVoltage",
| |
− | "v":15
| |
− | },
| |
− | {
| |
− | "n":"Light1",
| |
− | "v":0
| |
− | },
| |
− | {
| |
− | "n":"Light2",
| |
− | "v":0
| |
− | },
| |
− | {
| |
− | "n":"Light3",
| |
− | "v":0
| |
− | },
| |
− | {
| |
− | "n":"Light4",
| |
− | "v":0
| |
− | },
| |
− | {
| |
− | "n":"SignalStrength",
| |
− | "v":54
| |
− | }
| |
− | ],
| |
− | "bn":"SenData"
| |
− | },
| |
− | "ver":1
| |
− | }
| |
− | },
| |
− | "commCmd":2055,
| |
− | "requestID":2001,
| |
− | "agentID":"0017000004016943",
| |
− | "handlerName":"general",
| |
− | "sendTS":160081115
| |
− | }
| |
− | }
| |
− | | |
− | = Protocol Specification: = | |
| | | |
| [http://ess-wiki.advantech.com.tw/wiki/images/d/d9/Advantech_EnOcean_light_tower_2018.03.18.pdf http://ess-wiki.advantech.com.tw/wiki/images/d/d9/Advantech_EnOcean_light_tower_2018.03.18.pdf] | | [http://ess-wiki.advantech.com.tw/wiki/images/d/d9/Advantech_EnOcean_light_tower_2018.03.18.pdf http://ess-wiki.advantech.com.tw/wiki/images/d/d9/Advantech_EnOcean_light_tower_2018.03.18.pdf] |
| | | |
− | = Dashboard Configuration: =
| |
| | | |
− | <span style="font-size:medium;">1. Sign in WISE-PaaS Dashboard using your User ID and Password:</span>
| |
| | | |
− | <span style="font-size:medium;"> [https://dashboard-grafana-eiot.wise-paas.com https://dashboard-grafana-eiot.wise-paas.com]</span>
| + | = How to = |
| | | |
− | [[File:Tower Light 03-1.png|640x480px|Tower Light 03-1.png]]
| + | == Software Requirements == |
| | | |
| + | *USB receiver driver |
| + | *MQTT broker |
| + | *WISE-Agent |
| + | *API-GW |
| | | |
| + | == Software Installation for Windows 10 == |
| | | |
− | <span style="font-size:medium;">2. Drop down “Home” and select Tower Light Board.</span> | + | <span style="color:#FF0000;">Notice: Please connect the gateway to the Internet before performing the installation.</span> |
| | | |
− | <span style="font-size:medium;"> Board name: '''Advantech EIoT DTOS Tower Light Monitoring'''</span>
| + | Install Steps |
| | | |
| + | #Install USB receiver driver |
| + | #Install MQTT Broker |
| + | #Install API-GW |
| + | #Install EoLinkManager , edit config, then restart service. |
| + | #Install WISE-Agent |
| | | |
| + | Uninstall Steps |
| | | |
− | [[File:Tower Light 04-1.png|640x300px|Tower Light 04-1.png]]
| + | *Select the Start button, then select Settings > Apps. Choose the program you want to remove, and then select Uninstall. |
| | | |
| + | #WISE-Agent |
| + | #EoLinkManager |
| + | #API-GW |
| + | #MQTT Broker |
| | | |
| + | == Configuration == |
| | | |
| + | In Windows 10 |
| | | |
| + | *You can edit C:\Program Files (x86)\Advantech\EoLinkManager\EoLinkManager.ini to change setting. |
| + | *<span style="color:#FF0000;">Notice: Once config is modified, please restart EoLinkManager service in Task Manager or reboot gateway in order to apply new setting.</span> |
| + | *[[File:TLS service manager.PNG|RTENOTITLE]] |
| | | |
| + | Setting File example: |
| | | |
| + | {| border="1" cellspacing="1" cellpadding="1" style="width:500px;" |
| + | |- |
| + | | |
| + | [Platform]<br/>InterfaceName=EoLinkReceiver<br/>ServerURL=127.0.0.1<br/>ServerPort=1883<br/>ModuleName=EoLinkManager<br/>SensorName=LightSensor<br/>'''<span style="color:#0000FF;">SerialPort=COM3</span>'''<br/>Interval=1<br/><br/>[Sensors]<br/><span style="color:#0000FF;">'''NumberOfSensors=2'''</span><br/>'''<span style="color:#0000FF;">Sensor0=04016943<br/>Sensor1=0400E889</span>''' |
| | | |
− | [[File:Tower Light 05-1.png|640x200px|Tower Light 05-1.png]]
| + | |} |
| | | |
| + | <span style="color:#FF0000;">Notice: Please make sure above settings (in blue color) is correct. And please do not change other settings.</span> |
| | | |
| + | SerialPort |
| | | |
− | <span style="font-size:medium;">3. You will see the board is showed like this when all lights off:</span>
| + | *Assign serial port which USB receiver (USB300) is using. |
| | | |
− | [[File:Tower Light 01 .png|800x480px|Tower Light 01 .png]]
| + | Interval |
| | | |
| + | *The time delay between data access round in second. |
| | | |
| + | NumberOfSensors |
| | | |
− | <span style="font-size:medium;">4. You will see the board is showed like this when all lights on:</span>
| + | *Assign number of Tower Light Sensor module |
| | | |
− | [[File:Tower Light 02 .png|800x480px|Tower Light 02 .png]]
| + | Sensor0 |
| | | |
| + | *Assign id for Tower Light Sensor module. Format is Sensor0=<<MODULE_ID>> |
| + | *If you have multi Tower Light Sensor module, please start at a number 0 for the first module. |
| + | *Second module use Sensor1. |
| | | |
| + | == Debug == |
| | | |
− | <span style="font-size:medium;">5. Drop down “Tower Light” and select “Edit” to edit the widget’s HTML:</span>
| + | 1. Check all installed software versions are correct. |
| | | |
− | [[File:Tower Light 06-2.png|640x400px|Tower Light 06-2.png]]
| + | 2. Check if service is running |
| | | |
| + | *Make sure EoLinkManager service is running. |
| + | *Make sure WISEAgent service is running. |
| + | *Make sure APIGateway service is running. |
| + | *Make sure mosquitto service is running. |
| | | |
| + | 3. Check EoLinkManger log file |
| | | |
− | <span style="font-size:medium;">6. Define Tower Light Sensor ID in the widget’s HTML:</span>
| + | *log files is available at EoLinkManager installed folder, (ex: C:\Program Files (x86)\Advantech\EoLinkManager\logs) |
| + | *View logs files to check if there are any error messages. |
| | | |
− | [[File:Tower Light 10.png|640x200px|Tower Light 10.png]]
| + | 4. Check EoLinkManager configuration |
| | | |
| + | *Make sure SerialPort setting is the port number USB receiver (USB300) is using. |
| + | *Make sure Tower Light Sensor module id is correct and assigned in Sensors section in configuration file. |
| | | |
| + | 5. Check if device id of Tower Light Module is listed in Sensor Hub List |
| | | |
− | <span style="font-size:medium;">7. RESTful API and HTML request content:</span> | + | In web browser and open url : http://<span style="color:#FF0000;">GATEWAY_IP</span>:3000/restapi/WSNManage/SenHub/AllSenHubList |
| | | |
− | [[File:Tower Light 08-1.png|640x300px|Tower Light 08-1.png]] | + | *Assign ip address for GATEWAY_IP |
| + | *ex: [http://127.0.0.1:3000/restapi/WSNManage/SenHub/AllSenHubList http://127.0.0.1:3000/restapi/WSNManage/SenHub/AllSenHubList] |
| | | |
| + | Once Tower Light Module is managed by EoLinkManager, its device id will be listed in Sensor Hub List as shown on below picture. |
| | | |
| + | [[File:Tower Light senhublist.png|RTENOTITLE]] |
| | | |
− | <span style="font-size:larger;">Dashboard HTML:</span>
| + | 6. Check WISE-Agent connection status |
| | | |
− | <span style="font-size:larger;">[https://www.dropbox.com/s/mwtz64atix0uavb/Advantech%20EIoT%20DTOS%20Tower%20Light%20Monitoring-Graph-04016943-ADF-20180430.json?dl=0 https://www.dropbox.com/s/mwtz64atix0uavb/Advantech%20EIoT%20DTOS%20Tower%20Light%20Monitoring-Graph-04016943-ADF-20180430.json?dl=0]</span> | + | *Launch WISE-Agent shortcut in Windows Desktop.<br/>[[File:TLS debug wiseagent shortcut.jpg|RTENOTITLE]] |
| + | *Check if WISE-Agent is connected as below picture.<br/>[[File:TLS debug wiseagent connection2.PNG|600px|TLS debug wiseagent connection2.PNG]] |
| | | |
| + | 7. Check if sensor data is published to WISE-PaaS/EdgeSense |
| | | |
| + | *Use web browser to open WISE-PaaS/EdgeSense web pages. |
| + | *Go to Device Page and choose the LightSensor device you are using, click on Monitor icon. |
| + | *In Monitor page, select SenHub , then you can monitor the LightSensor data payload. |
| | | |
− | <span style="font-size:larger;">RESTful API: </span>
| + | = Grafana Dashboard = |
| | | |
− | <span style="font-size:larger;">'''[https://portal-rmm-advantech-eiot.wise-paas.com/rmm/v1/grafana/simplejson/query https://portal-rmm.wise-paas.com/rmm/v1/grafana/simplejson/query]'''</span> | + | *<span style="font-size:large;">[[Gantt-chart-for-TLS|A Gantt chart panel for TLS on Grafana]]</span> |
| | | |
− |
| |
| | | |
− | <span style="font-size:larger;">Example:</span>
| |
| | | |
− | <span style="font-size:larger;">''cache: false''</span>
| |
| | | |
− | <span style="font-size:larger;">''url: '[https://portal-rmm-advantech-eiot.wise-paas.com/rmm/v1/grafana/simplejson/query' https://portal-rmm.wise-paas.com/rmm/v1/grafana/simplejson/query']''</span>
| |
| | | |
− | <span style="font-size:larger;">''type: "post",''</span>
| + | = Release = |
| | | |
− | <span style="font-size:larger;">''contentType: 'application/json'''</span> | + | {| border="1" cellspacing="1" cellpadding="1" style="width: 1492px;" |
| + | |- |
| + | | style="text-align: center; width: 55px;" | Version |
| + | | style="text-align: center; width: 78px;" | Date<br/> |
| + | | style="text-align: center; width: 85px;" | Platform<br/> |
| + | | style="text-align: center; width: 89px;" | OS<br/> |
| + | | style="text-align: center; width: 394px;" | Release Note<br/> |
| + | | style="text-align: center; width: 759px;" | Download Link<br/> |
| + | | style="text-align: center; width: 759px;" | Note |
| + | |- |
| + | | style="text-align: center; width: 55px;" | 1.0.6 |
| + | | style="width: 78px; text-align: center;" | 2021/8/23 |
| + | | style="width: 85px; text-align: center;" | x86_64 CPU<br/> |
| + | | style="width: 89px; text-align: center;" | Windows 10<br/> |
| + | | style="width: 394px;" | |
| + | *Add log message |
| + | *Watchdog |
| + | *Improve stability |
| + | *Verified by <span style="color:#FF0000;">WISE-Agent 1.2.17</span> |
| | | |
− | <span style="font-size:larger;">''dataType: 'json'''</span>
| + | | style="width: 759px;" | |
| + | [https://www.dropbox.com/s/gqwvai9v8x9fjzw/API-GW-2.0.9.exe?dl=0 API-GW 2.0.9] |
| | | |
− | <span style="font-size:larger;">''data: '{"timezone":"browser","panelId":2,"range":{"from":"2018-04-09T05:46:51.357Z","to":"2018-04-09T09:46:51.357Z","raw":{"from":"now-6h","to":"now"}},"rangeRaw":{"from":"now-6h","to":"now"},"interval":"20s","intervalMs":20000,"targets":[{"target":"00000001-0000-0000-0017-000004016940|SenHub|/SenData/Light1","device":"00000001-0000-0000-0017-000004016940","plugin":"SenHub","sensor":"/SenData/Light1","refId":"A","type":"table"}],"maxDataPoints":960,"scopedVars":{"__interval":{"text":"20s","value":"20s"},"__interval_ms":{"text":20000,"value":20000}}}'''</span>
| + | [https://www.dropbox.com/s/rkbl747zi02gmzd/EoLinkManager-1.0.6.exe?dl=0 EoLinkManager 1.0.6] |
| | | |
− | <span style="font-size:larger;">''xhrFields: {withCredentials: true}''</span>
| + | [https://www.dropbox.com/s/rzubwa511g8h5x0/MQTTBroker-1.0.6.exe?dl=0 MQTTBroker 1.0.6] |
| | | |
| + | USB receiver driver:<br/>[https://www.dropbox.com/s/vi00t4ueb1nwe14/CDM21228_Setup.exe?dl=0 CDM21228_Setup.exe] |
| | | |
| + | | style="width: 759px;" | Notice: If API-GW 2.0.7 is installed in your system, please remove API-GW 2.0.7 first, then install API-GW v2.0.9. Please follow this [[#After_upgrading_API-GW.2C_API-GW_not_running|guide]].<br/> |
| + | |- |
| + | | style="text-align: center; width: 55px;" | 1.0.5<br/> |
| + | | style="width: 78px; text-align: center;" | 2020/6/1<br/> |
| + | | style="width: 85px; text-align: center;" | x86_64 CPU<br/> |
| + | | style="width: 89px; text-align: center;" | Windows 10<br/> |
| + | | style="width: 394px;" | |
| + | *Fix same Device Name shown in EdgeSense. |
| + | *Verified by <span style="color:#FF0000;">WISE-Agent 1.2.17</span> |
| | | |
− | <span style="font-size:medium;">8. Lights blinking status for the Tower Light:</span>
| + | | style="width: 759px;" | |
| + | [https://www.dropbox.com/s/4ou8wsr4hd6a1ku/API-GW-2.0.8.exe?dl=0 API-GW 2.0.8] |
| | | |
− | [[File:Tower Light 09.png|640x360px|Tower Light 09.png]] | + | [https://www.dropbox.com/s/4d3sl03pwlv48pd/EoLinkManager-1.0.5.exe?dl=0 EoLinkManager 1.0.5] |
| | | |
− | = How to = | + | [https://www.dropbox.com/s/q7p0d3ctk7pxbez/MQTTBrokerSetup_1.0.4.exe?dl=0 MQTTBrokerSetup 1.0.4] |
| | | |
− | == Software Requirements == | + | USB receiver driver:<br/>[https://www.dropbox.com/s/vi00t4ueb1nwe14/CDM21228_Setup.exe?dl=0 CDM21228_Setup.exe] |
| | | |
− | *USB receiver driver
| + | | style="width: 759px;" | Notice: If API-GW 2.0.7 is installed in your system, please remove API-GW 2.0.7 first, then install API-GW v2.0.8. Please follow this [[#After_upgrading_API-GW.2C_API-GW_not_running|guide]].<br/> |
− | *MQTT broker
| + | |- |
− | *WISE-Agent
| + | | style="text-align: center; width: 55px;" | 1.0.4<br/> |
− | *API-GW
| + | | style="width: 78px; text-align: center;" | 2019/12/20<br/> |
− | | + | | style="width: 85px; text-align: center;" | x86_64 CPU<br/> |
− | == Software Installation for Windows 10 == | + | | style="width: 89px; text-align: center;" | Windows 10<br/> |
− | | + | | style="width: 394px;" | |
− | Install Steps
| + | *Add log message |
− | | + | *Fix no sensor data received cause lost connection |
− | #Install USB receiver driver
| + | *Verified by <span style="color:#FF0000;">EdgeSense 1.0.106</span> |
− | #Install MQTT Broker | + | *Verified by <span style="color:#FF0000;">WISE-Agent 1.2.17</span> |
− | #Install API-GW
| |
− | #Install EoLinkManager , edit config, then restart service.
| |
− | #Install WISE-Agent | |
− | | |
− | Uninstall Steps
| |
− | | |
− | *Select the Start button, then select Settings > Apps. Choose the program you want to remove, and then select Uninstall.
| |
− | | |
− | #WISE-Agent
| |
− | #EoLinkManager
| |
− | #API-GW
| |
− | #MQTT Broker
| |
− | | |
− | == Configuration ==
| |
| | | |
− | In Windows 10
| + | | style="width: 759px;" | |
| + | API-GW 2.0.7 |
| | | |
− | *You can edit C:\Program Files (x86)\Advantech\EoLinkManager\EoLinkManager.ini to change setting.
| + | EoLinkManager 1.0.4 |
− | *Notice: Once config is changed, please using Windows Services Manager to restart EoLinkManager service or reboot gateway in order to apply new setting.
| |
| | | |
− | {| border="1" cellspacing="1" cellpadding="1" style="width:500px;"
| + | MQTTBrokerSetup 1.0.4 |
− | |-
| |
− | |
| |
− | [Platform]<br/>InterfaceName=EoLinkReceiver<br/>ServerURL=127.0.0.1<br/>ModuleName=EoLinkManager<br/>SensorName=LightSensor<br/>SerialPort=COM3<br/>ServerPort=1883<br/>Interval=1<br/>#Interval: The time delay between data access round in second.
| |
| | | |
− | [Sensors]<br/>NumberOfSensors=2<br/>Sensor0=04016943<br/>Sensor1=0400E889
| + | USB receiver driver:<br/>CDM21228_Setup.exe |
| | | |
| + | | style="width: 759px;" | <br/> |
| |} | | |} |
| | | |
− | == Service control == | + | = Troubleshooting = |
− | | |
− | '''In Windows'''
| |
− | | |
− | Check if EoLinkManager service is running:
| |
− | | |
− | *Use Service to check status of EoLinkManager service
| |
− | | |
− | Restart EoLinkManager service:
| |
− | | |
− | *Use Service to restart EoLinkManager service
| |
− | | |
− | Start EoLinkManager service:
| |
− | | |
− | *Use Service start EoLinkManager service
| |
− | | |
− | Stop EoLinkManager service:
| |
| | | |
− | *Use Service stop EoLinkManager service
| + | == After upgrading API-GW, API-GW not running == |
| | | |
| + | API-GW v2.0.7 or older version is not able to upgrade to v2.0.8 |
| | | |
− | == Release ==
| + | Please remove older version API-GW first, then install API-GW v2.0.8 |
| | | |
− | {| border="1" cellspacing="1" cellpadding="1" style="width: 1492px;"
| + | Below steps shows how to cleanly remove API-GW v2.0.7 or older version. |
− | |-
| |
− | | style="text-align: center;" | Index
| |
− | | style="text-align: center;" | Version
| |
− | | style="text-align: center; width: 76px;" | Date<br/>
| |
− | | style="text-align: center; width: 85px;" | Platform<br/>
| |
− | | style="text-align: center; width: 72px;" | OS<br/>
| |
− | | style="text-align: center; width: 538px;" | Release Note<br/>
| |
− | | style="text-align: center; width: 605px;" | Download Link<br/>
| |
− | |-
| |
− | | style="text-align: center;" | 1
| |
− | | style="text-align: center;" | 1.0.3
| |
− | | style="width: 76px; text-align: center;" | 2019/05/3
| |
− | | style="width: 85px; text-align: center;" | x86_64 CPU<br/>
| |
− | | style="width: 72px; text-align: center;" | Windows 10<br/>
| |
− | | style="width: 538px;" |
| |
− | *Run as Windows service
| |
− | *Support WISE-PaaS/EdgeSense 1.0.98
| |
− | *Support Grafana 5.4.3
| |
| | | |
− | | style="width: 605px;" |
| + | Step-1. Remove API-GW |
− | [file://eossfs/ESS-Release/EdgeSense/Release/Windows/API-GW/ API-GW 2.0.7]
| |
| | | |
− | [file://eossfs/ESS-Release/EdgeSense/Release/Windows/EnOcean/ EoLinkManager 1.0.3] | + | [[File:TLS remove app.png|RTENOTITLE]] |
| | | |
− | [file://eossfs/ESS-Release/EdgeSense/Release/Windows/MQTTBroker/ MQTTBrokerSetup 1.0.3]
| + | Step-2. Remove service. |
| | | |
− | USB receiver driver:<br/>[file://eossfs/ESS-Release/EdgeSense/Release/Windows/EnOcean/ CDM21228_Setup.exe]
| + | If API-GW is still listed in service manager as below picture, |
| | | |
− | Above files are available at local server, please paste file's url in File Explorer to copy file.
| + | [[File:TLS apigw in service list.png|RTENOTITLE]] |
| | | |
− | |-
| + | Then, use command line with Administrator privileges to run |
− | | style="text-align: center;" | 2
| |
− | | style="text-align: center;" |
| |
− | | style="width: 76px; text-align: center;" |
| |
− | | style="width: 85px; text-align: center;" |
| |
− | | style="width: 72px; text-align: center;" |
| |
− | | style="width: 538px;" |
| |
− | | style="width: 605px;" |
| |
| | | |
| + | sc delete apigw.exe |
| | | |
− | |-
| + | [[File:TLS sc delete old apigw service name.png|RTENOTITLE]] |
− | | style="text-align: center;" | 3
| |
− | | style="text-align: center;" |
| |
− | | style="width: 76px; text-align: center;" |
| |
− | | style="width: 85px; text-align: center;" |
| |
− | | style="width: 72px; text-align: center;" |
| |
− | | style="width: 538px;" |
| |
− | | style="width: 605px;" |
| |
− | | |
− | | |
− | |-
| |
− | | style="text-align: center;" | 4
| |
− | | style="text-align: center;" | <br/>
| |
− | | style="width: 76px; text-align: center;" |
| |
− | | style="width: 85px; text-align: center;" |
| |
− | | style="width: 72px; text-align: center;" |
| |
− | | style="width: 538px;" |
| |
− | | style="width: 605px;" |
| |
− | | |
− | | |
− | |} | |
For example, value of third light is 41.
1. Check all installed software versions are correct.
2. Check if service is running
3. Check EoLinkManger log file
4. Check EoLinkManager configuration
5. Check if device id of Tower Light Module is listed in Sensor Hub List
Once Tower Light Module is managed by EoLinkManager, its device id will be listed in Sensor Hub List as shown on below picture.
6. Check WISE-Agent connection status
7. Check if sensor data is published to WISE-PaaS/EdgeSense
Below steps shows how to cleanly remove API-GW v2.0.7 or older version.
Step-1. Remove API-GW
Step-2. Remove service.