Difference between revisions of "显示接口(LVDS、HDMI) LAN接口 USB接口(USB1-2、USB3-4、USB OTG) 音频接口 电源及指示灯和开关机复位按钮 GPIO接口 MINI PCIE接口 M.2接口 SPI、I2C 接口"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
Line 113: | Line 113: | ||
插入一张LVDS Connector的图片 | 插入一张LVDS Connector的图片 | ||
− | == '''LVDS | + | == '''LVDS Backlight Connector (LVDS_BL)''' == |
− | ''' | + | '''For avoiding to damage LCD panel, please make sure set a right voltage level before power on while connecting a LVDS panel (refer to jumper setting description for LVDS_BLP and LCD datasheet that you will use).''' |
+ | {| border="1" cellspacing="1" cellpadding="1" style="width: 371px;" | ||
+ | |- | ||
+ | | style="width: 88px;" | Pin | ||
+ | | style="width: 271px;" | Pin Name | ||
+ | |- | ||
+ | | style="width: 88px;" | 1 | ||
+ | | style="width: 271px;" | +VDD_BKLT_LVDS<br/> | ||
+ | |- | ||
+ | | style="width: 88px;" | 2 | ||
+ | | style="width: 271px;" | GND<br/> | ||
+ | |- | ||
+ | | style="width: 88px;" | 3 | ||
+ | | style="width: 271px;" | LVDS_BKLT_EN<br/> | ||
+ | |- | ||
+ | | style="width: 88px;" | 4 | ||
+ | | style="width: 271px;" | LVDS_BKLT_PWM<br/> | ||
+ | |- | ||
+ | | style="width: 88px;" | 5 | ||
+ | | style="width: 271px;" | VCC_SYS(+5V)<br/> | ||
+ | |} | ||
+ | 插入一张LVDS_BKLT Connector图片 | ||
== '''LVDS 1''' == | == '''LVDS 1''' == |
Revision as of 08:13, 21 October 2021
Contents
LVDS Connector(CN4)
RSB-4680 provides a LVDS 20x2-pin board-to-board connector for dual channel 18/ 24/30 bit LVDS panel up to 1920 x 1080. For avoid to damage to the LCD panel, please make sure to set the right voltage level before powering on while connecting a LVDS panel (refer to jumper setting description for LVDS_BLP, LVDS_VDD1 and LVDS_VDD2 and LCD datasheet that you will use).
Pin |
Pin Name |
Pin |
Pin Name |
1 | +VDD_LVDS |
2 | +VDD_LVDS |
3 | GND |
4 | GND |
5 | +VDD_LVDS |
6 | +VDD_LVDS |
7 | LVDS0_D0- |
8 | LVDS1_D0- |
9 | LVDS0_D0+ |
10 | LVDS1_D+ |
11 | GND |
12 | GND |
13 | LVDS0_D1- |
14 | LVDS1_D1- |
15 | LVDS0_D1+ |
16 | LVDS1_D1+ |
17 | GND |
18 | GND |
19 | LVDS0_D2- |
20 | LVDS1_D2- |
21 | LVDS0_D2+ |
22 | LVDS1_D2+ |
23 | GND |
24 | GND |
25 | LVDS0_CLK- |
26 | LVDS1_CLK- |
27 | LVDS0_CLK+ |
28 | LVDS1_CLK+ |
29 | GND |
30 | GND |
31 | LVDS0_D3- |
32 | LVDS1_D3- |
33 | LVDS0_D3+ |
34 | LVDS1_D3+ |
35 | LVDS_DDC_DAT |
36 | LVDS_DDC_CLK |
37 | LVDS0_D4- |
38 | LVDS1_D4- |
39 | LVDS0_D4+ |
40 | LVDS1_D4+ |
插入一张LVDS Connector的图片
LVDS Backlight Connector (LVDS_BL)
For avoiding to damage LCD panel, please make sure set a right voltage level before power on while connecting a LVDS panel (refer to jumper setting description for LVDS_BLP and LCD datasheet that you will use).
Pin | Pin Name |
1 | +VDD_BKLT_LVDS |
2 | GND |
3 | LVDS_BKLT_EN |
4 | LVDS_BKLT_PWM |
5 | VCC_SYS(+5V) |
插入一张LVDS_BKLT Connector图片
LVDS 1
LVDS1 Backlight