Difference between revisions of "Windows On ARM BSP User Guide for ROM-5720"

Revision as of 11:00, 12 April 2022

Windows On ARM (WoA) Version

Windows : 20H2 (en_windows_10_iot_enterprise_version_20h2_arm64_dvd_fe0947da.iso)
NXP BSP : W1809 (W1809_1_1_0_imx-firmware.tgz, W1809_1_1_0_imx-iotcore.zip)

Released Image

20220412

Build Environment on Host

Currently, we adopt Docker as build environment.

You can get the advrisc/u14.04-410clbv1 Docker image for developing WoA projects.

Docker command:

$ docker pull advrisc/u14.04-410clbv1

Run Docker example

Step1 Run docker container (example)

sudo docker run -it --name <CONTAINER_NAME> -v <PATH_TO_BSP>:/home/adv/BSP:rw advrisc/u14.04-410clbv1 /bin/bash

Step2 In container, change the user. (example)

 adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP

Install Dependency Packages

$ sudo apt-get update
$ sudo apt-get install -y attr build-essential python python-dev python-crypto python-wand device-tree-compiler bison flex swig iasl uuid-dev wget git bc libssl-dev zlib1g-dev python3-pip

New for 1903 UEFI

$ sudo apt-get install -y gcc g++ make python3 mono-devel

Upgrade Python 3.6

$ wget https://www.python.org/ftp/python/3.9.0/Python-3.6.3.tgz
$ tar -xvf Python-3.6.3.tgz
$ cd Python-3.6.3
$ sudo ./configure --enable-optimizations --with-ensurepip=install
$ make -j 8
$ sudo make altinstall

Configure python alternatives

$ sudo update-alternatives --install /usr/bin/python python /usr/bin/python2.7 1
$ sudo update-alternatives --install /usr/bin/python python /usr/bin/python3.4 1
$ sudo update-alternatives --install /usr/bin/python python /usr/local/bin/python3.6 2

$ sudo pip3.6 install --upgrade pip
$ pip install pycryptodome

Upgrade Git 2.25 (> 2.11)

$ sudo apt-get install -y tcl build-essential tk gettext
$ wget https://github.com/git/git/archive/v2.25.0.tar.gz
$ tar zxvf v2.25.0.tar.gz
$ cd git-2.25.0/
$ make configure
$ ./configure --prefix=/usr
$ make all
$ sudo make install

ToolChain

$ cd ~
$ wget https://releases.linaro.org/components/toolchain/binaries/7.2-2017.11/aarch64-linux-gnu/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz
$ tar xf gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz
$ rm gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz

Getting Source Code

Set up bootloader / UEFI source code

W1809_1_1_0_imx-firmware.tgz	W1809_1_1_0_imx-iotcore.zip

Extract BSP files

$ mkdir <new bsp folder>
$ unzip W*_imx-iotcore*.zip -d <new bsp folder>
$ tar -xf W*_imx-firmware*.tgz -C <new bsp folder>

Add more additional files

$ git clone https://AIM-Linux@dev.azure.com/AIM-Linux/ms-iot-ent/_git/adv-build
$ cp -a adv-build/adv-buildme64.sh <new bsp folder>
$ cp -a adv-build/enterprise <new bsp folder>
$ cp -a adv-build/ROM5720_iMX8M_2GB <new bsp folder>/imx-iotcore/build/board/

Update UEFI

$ cd <new bsp folder>
$ rm -rf mu_platform_nxp
$ git clone https://AIM-Linux@dev.azure.com/AIM-Linux/ms-iot-ent/_git/mu_platform_nxp
$ cd mu_platform_nxp
$ sudo pip install -r requirements.txt --upgrade
$ cp -a /usr/local/lib/python3.6/site-packages/*  /home/adv/.local/lib/python3.6/site-packages/

Update U-Boot

$ cd ../u-boots
$ rm -rf u-boot-imx_arm64
$ git clone https://AIM-Linux@dev.azure.com/AIM-Linux/ms-iot-ent/_git/u-boot-imx_arm64

All of files are collected on git server. please check following.

$ cd ~/BSP
$ mkdir WoA
$ cd WoA
$ git config --global user.name "Your Name"
$ git config --global user.email you@example.com
$ ../repo/repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/ms-iot-ent/_git/manifest -m W1809_1_1_0.xml
$ ../repo/repo sync

Build Firmware / UEFI

$ export AARCH64_TOOLCHAIN_PATH=~/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
$ ./adv-buildme64.sh -b 5720 -t all -bc DEBUG

PS: Before build ROM-5720, there are something have done first.
1).Replace keyword 'python3' with 'python' in adv-buildme64.sh.
2).The path of AARCH64_TOOLCHAIN_PATH must be in the HOME path.
3).Build EVK configuration first.

$ ./adv-buildme64.sh -b 8M -t all -bc DEBUG

4).for ROM-5720 bootloader setting, the soc.mak have to be modified.

The firmware will be generated in the following

<PROJECT_BSP>/imx-iotcore/build/board/<BOARD_NAME>/Package/BootLoader/flash.bin

The uefi will be generated in the following

<PROJECT_BSP>/imx-iotcore/build/board/<BOARD_NAME>/Package/BootFirmware/uefi.fit

Build Driver

Set up build environment

Make sure the project name in ROM5720_iMX8M_2GB_Package.vcxproj

<ProjectName>ROM5720_iMX8M_2GB</ProjectName>

Right click "Board Packages" -> Add -> Exist Project in the Solution Explorer panel

<BSP>\imx-iotcore\build\board\ROM5720_iMX8M_2GB\Package\ROM5720_iMX8M_2GB_Package.vcxproj

Right click "GenerateBSP" and select 'properties' Click NMake -> Build Command Line -> Edit, and added following setting

call ..\..\..\tools\BuildBSP.bat iMX8 ROM5720_iMX8M_2GB

Build

Open Visual Studio as administrator Open solution file

<BSP>/imx-iotcore/build/solution/iMXPlatform/iMXPlatform.sln

Right click 'GenerateBSP' and select 'build'

If get any errors about Hal*,
The specified timestamp server either could not be reached or… HalExtiMXDma
please remove following projects

Go to following path, add those three projects back

<BSP>\imx-iotcore\components\NXP.SignedDrivers\VsProjects

Build each hal* project and build 'GenerateBSP' again The build result will be in the

<BSP>\imx-iotcore\BSP\ROM5720_iMX8M_2GB\

Flash Image

Make OS Installer

Extract install.wim from Windows IoT image

en_windows_10_iot_enterprise_version_20h2_arm64_dvd_fe0947da.iso/sources/

Extract Windows IoT for NXP - IoTEntOnNXP.v1.3.zip and put the install.wim in the 'image' folder Build WinPE Image
Using v1.3 make-winpe-enterprise-windebug.cmd

c:\>cd IoTEntOnNXP.v1.3
c:\IoTEntOnNXP.v1.3>make-winpe-enterprise-windebug.cmd /testbin /image ..\image\install.wim /splitwim /windebug /winpedebug

Get SD card number
1).Open command line as administrator
2).Check number by enter following (SD card 16GB)

C:\Windows\system32>diskpart
DISKPART> list disk
  Disk ###  Status         Size     Free     Dyn  Gpt
  --------  -------------  -------  -------  ---  ---
  Disk 0    Online          465 GB  1024 KB        *
  Disk 1    Online           14 GB      0 B        *

Flash image to SD card

c:\IoTEntOnNXP>make-winpe-enterprise-windebug.cmd /apply 1

Flash EMMC

To flash image to EMMC via SD card, please refer to HERE.

Reference

Update uefi.fit and flash.bin in the Firmware Downloader

1).Plug Firmware Downloader SD card
2).Copy the file

$ sudo mount /dev/sdX2 /mnt
$ sudo cp <PATH_TO_FILES>/{uefi.fit,flash.bin} /mnt/home/root/win10/
$ sudo umount /mnt

Restore OS installer SD card

If the OS installer SD card have do installing process completed already, it have to restore again for re-using.
1).Rename _efi folder to EFI
2).Change partition id

C:\Windows\system32> diskpart
DISKPART> list disk
  Disk ###  Status         Size     Free     Dyn  Gpt
  --------  -------------  -------  -------  ---  ---
  Disk 0    Online          465 GB  1024 KB        *
  Disk 1    No Media           0 B      0 B
  Disk 2    Online           14 GB      0 B        *

DISKPART> sel disk 2
Disk 2 is now the selected disk.
DISKPART> list partition

  Partition ###  Type              Size     Offset
  -------------  ----------------  -------  -------
  Partition 1    Unknown             32 MB  1024 KB
  Partition 2    Primary             29 GB    33 MB

DISKPART> sel partition 1
Partition 1 is now the selected partition.
DISKPART> set id="c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
DiskPart successfully set the partition ID.
DISKPART> exit

The utility scripts\diskpart will change partition id after installing process completed.