Difference between revisions of "EPC-R4680 user guide"

From ESS-WIKI
Jump to: navigation, search
(Created page with "<h2><b>資源特性(Features)</b></h2> <ul> <li>Rockchip ARM Cortex-A17 RK3288 Quad Core, up to 1.6GHz</li> <li>Onboard 2GB DDR3L memory and 8GB eMMC</li> <li>HDMI 3840x21...")
 
 
(16 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
<h2><b>資源特性(Features)</b></h2>
 
  
−
<ul>
+
== '''資源特性(Features)''' ==
−
<li>Rockchip ARM Cortex-A17 RK3288 Quad Core, up to 1.6GHz</li>
 
−
<li>Onboard 2GB DDR3L memory and 8GB eMMC</li>
 
−
<li>HDMI 3840x2160 at 60Hz, VGA 1920x1200 at 60Hz, Dual Channel 18/24/30 bit LVDS</li>
 
−
<li>Support 4K H.264/H.265 Video decoder</li>
 
−
<li>6 UART, 6 USB2.0, 1 GbE, 8 GPIO, 1 MIPI CSI, 1 SPI</li>
 
−
<li>M.2 for WIFI/BT support, mini-PCIe for 3G/4G support</li>
 
−
<li>Support Linux and Android</li>
 
−
</ul>
 
  
−
<h2><b>訂購資訊(Ordering Information)</b></h2>
+
*Rockchip ARM Cortex-A17 RK3288 Quad Core, up to 1.6GHz
 +
*Onboard 2GB DDR3L memory and 8GB eMMC
 +
*HDMI 3840x2160 at 60Hz, VGA 1920x1200 at 60Hz, Dual Channel 18/24/30 bit LVDS
 +
*Support 4K H.264/H.265 Video decoder
 +
*6 UART, 6 USB2.0, 1 GbE, 8 GPIO, 1 MIPI CSI, 1 SPI
 +
*M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
 +
*Support Linux and Android
  
−
<p><b><img _fck_mw_filename="RK3288-Debian9-Ordering Information.png" _fck_mw_origimgheight="109" _fck_mw_origimgwidth="975" alt="RTENOTITLE" src="/wiki/images/9/97/RK3288-Debian9-Ordering_Information.png" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
== '''訂購資訊(Ordering Information)''' ==
  
−
<h2><b>接口布局和尺寸(Layout and Sizes)</b></h2>
+
[[File:RK3288-Debian9-Ordering Information.png|RTENOTITLE]]
  
−
<h3><b>接口布局圖&nbsp;Board Dimension Layout&nbsp;</b></h3>
+
&nbsp;
  
−
<p><img _fck_mw_filename="RSB-4680connector1.png" _fck_mw_origimgheight="648" _fck_mw_origimgwidth="953" alt="RTENOTITLE" src="/wiki/images/c/c1/RSB-4680connector1.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
== '''接口布局和尺寸(Layout and Sizes)''' ==
  
−
<p><img _fck_mw_filename="RSB-4680connector2.png" _fck_mw_origimgheight="267" _fck_mw_origimgwidth="763" alt="RTENOTITLE" src="/wiki/images/2/23/RSB-4680connector2.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
[[File:EPC-R4680 case.PNG|RTENOTITLE]]
  
−
<p><img _fck_mw_filename="RSB-4680connector3.png" _fck_mw_origimgheight="492" _fck_mw_origimgwidth="755" alt="RTENOTITLE" src="/wiki/images/6/6e/RSB-4680connector3.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
&nbsp;
  
−
<h3><b>Connector List</b></h3>
+
&nbsp;
  
−
<table border="1" cellpadding="1" cellspacing="1" style="width:500px;">
+
=== '''接口布局圖&nbsp;Board Dimension Layout&nbsp;''' ===
−
<tbody>
 
−
<tr>
 
−
<td style="width: 106px;">BAT</td>
 
−
<td style="width: 381px;">RTC Battery Connector</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN2</td>
 
−
<td style="width: 381px;">Audio</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN3</td>
 
−
<td style="width: 381px;">GPIO</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN4</td>
 
−
<td style="width: 381px;">18/24/30 bit Dual-Channel LVDS</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">LVDS_BL</td>
 
−
<td style="width: 381px;">LVDS Backlight Control</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN5</td>
 
−
<td style="width: 381px;">Power Button &amp; LED</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN7</td>
 
−
<td style="width: 381px;">Recover</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN16</td>
 
−
<td style="width: 381px;">12V DC Jack</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN20</td>
 
−
<td style="width: 381px;">Internal USB Pin Header</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">USB34</td>
 
−
<td style="width: 381px;">Dual Type A USB Connector</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">OTG</td>
 
−
<td style="width: 381px;">Micro USB Connector</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN21</td>
 
−
<td style="width: 381px;">SPI</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">CN22</td>
 
−
<td style="width: 381px;">I2C</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">COM</td>
 
−
<td style="width: 381px;">Internal RS232 (COM6 &amp; COM7 with 12V/5V Power)</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">COM13</td>
 
−
<td style="width: 381px;">Internal RS232 (COM1 &amp; COM3)</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">COM4</td>
 
−
<td style="width: 381px;">External COM (With RS232 &amp;RS-485)</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">DEBUG</td>
 
−
<td style="width: 381px;">COM2 or Console</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">HDMI</td>
 
−
<td style="width: 381px;">HDMI</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">LAN</td>
 
−
<td style="width: 381px;">LAN</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">M.2</td>
 
−
<td style="width: 381px;">M.2</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">MINIPCIE</td>
 
−
<td style="width: 381px;">MINIPCIE</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">SD</td>
 
−
<td style="width: 381px;">Micro SD</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">SIM1</td>
 
−
<td style="width: 381px;">Standard SIM</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">SW2</td>
 
−
<td style="width: 381px;">Reset Button</td>
 
−
</tr>
 
−
<tr>
 
−
<td style="width: 106px;">VGA</td>
 
−
<td style="width: 381px;">VGA</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<h3><b>接口引脚定義 (Pin definitions)</b></h3>
+
[[File:RSB-4680connector1.png|RTENOTITLE]]
  
−
<ul>
+
[[File:RSB-4680connector2.png|RTENOTITLE]]
−
<li><a href="%E7%94%B5%E6%B1%A0%E6%89%A3%EF%BC%88RTC%EF%BC%89">电池扣（RTC）</a></li>
 
−
<li><a href="%E4%B8%B2%E5%8F%A3%EF%BC%88RS232%20DB%2CRS232%2F485%2CInternal%20RS232%EF%BC%89">串口（RS232_DB,RS232/485,Internal RS232）</a></li>
 
−
<li><a href="%E6%98%BE%E7%A4%BA%E6%8E%A5%E5%8F%A3%EF%BC%88LVDS%2CLVDS%20Balight%2CHDMI%EF%BC%89">显示接口（LVDS,LVDS_Balight,HDMI,VGA）</a></li>
 
−
<li><a href="LAN%E6%8E%A5%E5%8F%A3%28LAN%29">LAN接口(LAN)</a></li>
 
−
<li><a href="USB%E6%8E%A5%E5%8F%A3%EF%BC%88USB3-4%2COTG%EF%BC%89">USB接口（USB34,USB Pin header,OTG）</a></li>
 
−
<li><a href="%E9%9F%B3%E9%A2%91%E6%8E%A5%E5%8F%A3%EF%BC%88Audio%EF%BC%89">音频接口（Audio）</a></li>
 
−
<li><a href="Mico%20SD%26SIM%20Card">Mico SD&amp;SIM Card</a></li>
 
−
<li><a href="%E7%94%B5%E6%BA%90%E5%8F%8A%E6%8C%87%E7%A4%BA%E7%81%AF%E5%92%8C%E5%BC%80%E5%85%B3%E6%9C%BA%E5%A4%8D%E4%BD%8D%E6%8C%89%E9%92%AE%EF%BC%88DC%20Power%E3%80%81LED%E3%80%81Power%20Button">电源及指示灯和开关机复位按钮（DC Power,Power Button&amp;LED,Recover,Reset Button</a><a href="USB%E6%8E%A5%E5%8F%A3%EF%BC%88USB3-4%2COTG%EF%BC%89">）</a>&nbsp;&nbsp;</li>
 
−
<li><a href="GPIO%E6%8E%A5%E5%8F%A3">GPIO接口</a></li>
 
−
<li><a href="MINI%20PCIE%E6%8E%A5%E5%8F%A3">MINI PCIE接口</a></li>
 
−
<li><a href="M.2%E6%8E%A5%E5%8F%A3">M.2接口</a></li>
 
−
<li><a href="SPI%EF%BC%8CI2C%E6%8E%A5%E5%8F%A3">SPI，I2C接口</a></li>
 
−
<li><a href="Jumper%20List">Jumper List</a></li>
 
−
</ul>
 
  
−
<h3><b>&nbsp;机械尺寸&nbsp; (</b>Mechanical Characteristics)</h3>
+
'''Connector List'''
  
−
<p><b><img _fck_mw_filename="Board Dimension Layout (Top Side).png" alt="RTENOTITLE" src="/wiki/images/9/9d/Board_Dimension_Layout_%28Top_Side%29.png" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
{| border="1" cellpadding="1" cellspacing="1" style="width:500px;"
 +
|-
 +
| style="width: 106px;" | BAT
 +
| style="width: 381px;" | RTC Battery Connector
 +
|-
 +
| style="width: 106px;" | CN2
 +
| style="width: 381px;" | Audio
 +
|-
 +
| style="width: 106px;" | CN3
 +
| style="width: 381px;" | GPIO
 +
|-
 +
| style="width: 106px;" | CN4
 +
| style="width: 381px;" | 18/24/30 bit Dual-Channel LVDS
 +
|-
 +
| style="width: 106px;" | LVDS_BL
 +
| style="width: 381px;" | LVDS Backlight Control
 +
|-
 +
| style="width: 106px;" | CN5
 +
| style="width: 381px;" | Power Button & LED
 +
|-
 +
| style="width: 106px;" | CN7
 +
| style="width: 381px;" | Recover
 +
|-
 +
| style="width: 106px;" | CN16
 +
| style="width: 381px;" | 12V DC Jack
 +
|-
 +
| style="width: 106px;" | CN20
 +
| style="width: 381px;" | Internal USB Pin Header
 +
|-
 +
| style="width: 106px;" | USB34
 +
| style="width: 381px;" | Dual Type A USB Connector
 +
|-
 +
| style="width: 106px;" | OTG
 +
| style="width: 381px;" | Micro USB Connector
 +
|-
 +
| style="width: 106px;" | CN21
 +
| style="width: 381px;" | SPI
 +
|-
 +
| style="width: 106px;" | CN22
 +
| style="width: 381px;" | I2C
 +
|-
 +
| style="width: 106px;" | COM
 +
| style="width: 381px;" | Internal RS232 (COM6 & COM7 with 12V/5V Power)
 +
|-
 +
| style="width: 106px;" | COM13
 +
| style="width: 381px;" | Internal RS232 (COM1 & COM3)
 +
|-
 +
| style="width: 106px;" | COM4
 +
| style="width: 381px;" | External COM (With RS232 &RS-485)
 +
|-
 +
| style="width: 106px;" | DEBUG
 +
| style="width: 381px;" | COM2 or Console
 +
|-
 +
| style="width: 106px;" | HDMI
 +
| style="width: 381px;" | HDMI
 +
|-
 +
| style="width: 106px;" | LAN
 +
| style="width: 381px;" | LAN
 +
|-
 +
| style="width: 106px;" | M.2
 +
| style="width: 381px;" | M.2
 +
|-
 +
| style="width: 106px;" | MINIPCIE
 +
| style="width: 381px;" | MINIPCIE
 +
|-
 +
| style="width: 106px;" | SD
 +
| style="width: 381px;" | Micro SD
 +
|-
 +
| style="width: 106px;" | SIM1
 +
| style="width: 381px;" | Standard SIM
 +
|-
 +
| style="width: 106px;" | SW2
 +
| style="width: 381px;" | Reset Button
 +
|-
 +
| style="width: 106px;" | VGA
 +
| style="width: 381px;" | VGA
 +
|}
  
−
<p><img _fck_mw_filename="Board Dimension Layout (Top Side)2.png" alt="RTENOTITLE" src="/wiki/images/5/58/Board_Dimension_Layout_%28Top_Side%292.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
=== '''接口引脚定義 (Pin definitions)''' ===
  
−
<h2><b>快速入门 (Quick Start)</b></h2>
+
[[电池扣（RTC）|电池扣（RTC]]
  
−
<h2>&nbsp; &nbsp; &nbsp;系统下载 (OS Download)</h2>
+
[[串口（RS232_DB,RS232/485,Internal_RS232)|串口（RS232_DB,RS232/485,Internal RS232)]]
  
−
<ul>
+
[[显示接口（LVDS,LVDS_Balight,HDMI,VGA）|显示接口（LVDS,LVDS_Balight,HDMI,VGA）]]
−
<li><b>Debian 9</b></li>
 
−
<li><a alt="https://pan.baidu.com/s/1SH2TTLNAQhliF3RNq1bHVw" href="https://pan.baidu.com/s/1SH2TTLNAQhliF3RNq1bHVw" title="https://pan.baidu.com/s/1SH2TTLNAQhliF3RNq1bHVw">Pan.Baidu_Link_for_RK3288</a>&nbsp; Password&nbsp;:&nbsp;4jvr</li>
 
−
</ul>
 
  
−
<table border="1" cellpadding="0" cellspacing="0">
+
[[LAN接口(LAN)|LAN接口(LAN)]]
−
<tbody>
 
−
<tr>
 
−
<td>
 
−
<p><b>Git BSP Tag Version</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Product</b></p>
 
−
</td>
 
−
<td>&nbsp;<b>BSP/Image</b></td>
 
−
<td>
 
−
<p><b>Date</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Alpha Release</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Beta Release</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>MP Release</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Release Note</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Comment</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Release Owner</b></p>
 
−
</td>
 
−
</tr>
 
−
<tr>
 
−
<td>
 
−
<p>RK3288LBV2100</p>
 
−
</td>
 
−
<td>
 
−
<p>RSB-4680</p>
 
−
</td>
 
−
<td><a alt="https://www.dropbox.com/sh/bymsb6fnt08vu2e/AAChgrKV5h9lNw-gV9gbBt4ra/2019-05-27?dl=0&amp;subfolder_nav_tracking=1" href="https://www.dropbox.com/sh/bymsb6fnt08vu2e/AAChgrKV5h9lNw-gV9gbBt4ra/2019-05-27?dl=0&amp;subfolder_nav_tracking=1" title="https://www.dropbox.com/sh/bymsb6fnt08vu2e/AAChgrKV5h9lNw-gV9gbBt4ra/2019-05-27?dl=0&amp;subfolder_nav_tracking=1">&nbsp;2019-05-27</a></td>
 
−
<td>
 
−
<p>2019-05-27</p>
 
−
</td>
 
−
<td>
 
−
<p>&nbsp;</p>
 
−
</td>
 
−
<td>
 
−
<p>&nbsp;V</p>
 
−
</td>
 
−
<td>
 
−
<p>&nbsp;</p>
 
−
</td>
 
−
<td>
 
−
<p><a alt="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V2100.xlsx" href="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V2100.xlsx" title="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V2100.xlsx">Release Note</a></p>
 
−
</td>
 
−
<td>1.for QA test<br />
 
−
2.release for PM</td>
 
−
<td>
 
−
<p>Yunjin.Jiang</p>
 
−
</td>
 
−
</tr>
 
−
<tr>
 
−
<td>RK3288DIV21040</td>
 
−
<td>RSB-4680</td>
 
−
<td><a alt="https://www.dropbox.com/sh/bymsb6fnt08vu2e/AADODDaZj6Ywk8BZyGB-2ynLa/2019-09-05?dl=0&amp;subfolder_nav_tracking=1" href="https://www.dropbox.com/sh/bymsb6fnt08vu2e/AADODDaZj6Ywk8BZyGB-2ynLa/2019-09-05?dl=0&amp;subfolder_nav_tracking=1" title="https://www.dropbox.com/sh/bymsb6fnt08vu2e/AADODDaZj6Ywk8BZyGB-2ynLa/2019-09-05?dl=0&amp;subfolder_nav_tracking=1">2019-09-05</a></td>
 
−
<td>2019-09-05</td>
 
−
<td>&nbsp;</td>
 
−
<td>V</td>
 
−
<td>&nbsp;</td>
 
−
<td><a alt="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V2100.xlsx" href="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V2100.xlsx" title="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V2100.xlsx">Release Note</a></td>
 
−
<td>1.for QA test<br />
 
−
2.release for PM</td>
 
−
<td>Yunjin.Jiang</td>
 
−
</tr>
 
−
<tr>
 
−
<td>RK3288DIV21041</td>
 
−
<td>RSB-4680</td>
 
−
<td>2020-04-21</td>
 
−
<td>2020-04-21</td>
 
−
<td>&nbsp;</td>
 
−
<td>V</td>
 
−
<td>&nbsp;</td>
 
−
<td><a alt="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V21041.xlsx" href="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V21041.xlsx" title="http://ess-wiki.advantech.com.tw/view/File:RK3288_Debian_ReleaseNote_V21041.xlsx">Release Note</a></td>
 
−
<td>1.for QA test<br />
 
−
2.release for PM</td>
 
−
<td>Yunjin.Jiang</td>
 
−
</tr>
 
−
<tr>
 
−
<td>
 
−
<p>RK3288DIV21045</p>
 
−
</td>
 
−
<td>RSB-4680</td>
 
−
<td>2021-08-10</td>
 
−
<td>2021-08-10</td>
 
−
<td>V</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td><a alt="http://ess-wiki.advantech.com.tw/wiki/images/1/16/RSB4680_A3_Release_Notes_DIV21045_20210810.pdf" href="http://ess-wiki.advantech.com.tw/wiki/images/1/16/RSB4680_A3_Release_Notes_DIV21045_20210810.pdf" title="http://ess-wiki.advantech.com.tw/wiki/images/1/16/RSB4680_A3_Release_Notes_DIV21045_20210810.pdf">Release Note</a></td>
 
−
<td>1.for QA test<br />
 
−
2.release for PM</td>
 
−
<td>Yunjin.Jiang</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<ul>
+
[[USB接口（USB34,USB_Pin_header,OTG）)|USB接口（USB34,USB Pin header,OTG）]]
−
<li><b>Debian 10</b></li>
 
−
<li><a alt="https://pan.baidu.com/s/1TgrhhblhawD4Vx5Q3sHC4Q" href="https://pan.baidu.com/s/1TgrhhblhawD4Vx5Q3sHC4Q" title="https://pan.baidu.com/s/1TgrhhblhawD4Vx5Q3sHC4Q">Baidu link for Debian10</a>&nbsp;Password：iz74</li>
 
−
</ul>
 
  
−
<table border="1" cellpadding="0" cellspacing="0" style="width: 897px;">
+
[[音频接口（Audio）|音频接口（Audio）]]
−
<tbody>
 
−
<tr>
 
−
<td>
 
−
<p><b>Image Version</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Product</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Date</b></p>
 
−
</td>
 
−
<td style="width: 58px;">
 
−
<p><b>Release</b></p>
 
−
</td>
 
−
<td style="width: 128px;">
 
−
<p><b>Release Note</b></p>
 
−
</td>
 
−
<td style="width: 469px;">
 
−
<p><b>Binary OS Image Name</b></p>
 
−
</td>
 
−
</tr>
 
−
<tr>
 
−
<td>
 
−
<p>DIV230009</p>
 
−
</td>
 
−
<td>
 
−
<p>RSB-4680</p>
 
−
</td>
 
−
<td>
 
−
<p>2021-04-13</p>
 
−
</td>
 
−
<td style="width: 58px;">
 
−
<p>Beta</p>
 
−
</td>
 
−
<td style="width: 128px;">
 
−
<p><a alt="http://ess-wiki.advantech.com.tw/wiki/images/c/c5/RSB-4680_Debian10_Release_note_2021-04-13.pdf" href="http://ess-wiki.advantech.com.tw/wiki/images/c/c5/RSB-4680_Debian10_Release_note_2021-04-13.pdf" title="http://ess-wiki.advantech.com.tw/wiki/images/c/c5/RSB-4680_Debian10_Release_note_2021-04-13.pdf">Release Note</a></p>
 
−
</td>
 
−
<td style="width: 469px;">
 
−
<p>4680A3AIM20DIV230009_2021-04-13.img.tgz</p>
 
−
</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<ul>
+
[[Mico_SD&SIM_Card|Mico SD&SIM Card]]
−
<li><b>&nbsp;Android</b></li>
 
−
<li><a alt="https://pan.baidu.com/s/1Zrg71d6XD9C2EtKYKIq_ew" href="https://pan.baidu.com/s/1Zrg71d6XD9C2EtKYKIq_ew" title="https://pan.baidu.com/s/1Zrg71d6XD9C2EtKYKIq_ew">Baidu link for RK Android 6.0</a>&nbsp; Password:vyzu</li>
 
−
<li><a alt="https://pan.baidu.com/s/1gTFBRHLb37jtjqkOTASf6Q" href="https://pan.baidu.com/s/1gTFBRHLb37jtjqkOTASf6Q" title="https://pan.baidu.com/s/1gTFBRHLb37jtjqkOTASf6Q">Baidu link for RK Android 8.1</a>&nbsp; Password:9ak6</li>
 
−
<li><a alt="https://www.dropbox.com/sh/1ulmx09p9i5orvo/AACaiHijPL05lAjtM-vUgAT5a?dl=0" href="https://www.dropbox.com/sh/1ulmx09p9i5orvo/AACaiHijPL05lAjtM-vUgAT5a?dl=0" title="https://www.dropbox.com/sh/1ulmx09p9i5orvo/AACaiHijPL05lAjtM-vUgAT5a?dl=0">Dropbox link for RK Android 6.0.1</a></li>
 
−
</ul>
 
  
−
<table border="1" cellpadding="0" cellspacing="0" width="894">
+
[[电源及指示灯和开关机复位按钮（DC_Power,Power_Button&LED,Recover,Reset_Button)|电源及指示灯和开关机复位按钮（DC Power,Power Button&LED,Recover,Reset Button）]]
−
<tbody>
 
−
<tr>
 
−
<td>Android version</td>
 
−
<td>
 
−
<p>Git BSP Tag Version</p>
 
−
</td>
 
−
<td>
 
−
<p>Product</p>
 
−
</td>
 
−
<td>
 
−
<p>CPU</p>
 
−
</td>
 
−
<td>
 
−
<p>Date</p>
 
−
</td>
 
−
<td>
 
−
<p>Release</p>
 
−
</td>
 
−
<td>
 
−
<p>Release Note</p>
 
−
</td>
 
−
<td>
 
−
<p>Download Path</p>
 
−
</td>
 
−
<td>
 
−
<p>FW Tool</p>
 
−
</td>
 
−
<td>
 
−
<p>Comment</p>
 
−
</td>
 
−
<td>
 
−
<p>Release Owner</p>
 
−
</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android 6.0.1</td>
 
−
<td>rkABV1000</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2018-7-10</td>
 
−
<td>Alpha</td>
 
−
<td>&nbsp;</td>
 
−
<td><a alt="https://pan.baidu.com/s/1CEvGJVwyx42LkXmEfePJBg" href="https://pan.baidu.com/s/1CEvGJVwyx42LkXmEfePJBg" title="https://pan.baidu.com/s/1CEvGJVwyx42LkXmEfePJBg"><font color="#0066cc">Binary OS Image</font></a></td>
 
−
<td>
 
−
<p><a alt="https://pan.baidu.com/s/1rqvPb0mrnHeZ__IQN_88lg" href="https://pan.baidu.com/s/1rqvPb0mrnHeZ__IQN_88lg" title="https://pan.baidu.com/s/1rqvPb0mrnHeZ__IQN_88lg"><font color="#0066cc">FW Tool</font></a></p>
 
−
</td>
 
−
<td>&nbsp;</td>
 
−
<td>
 
−
<p>&nbsp;</p>
 
−
</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android 6.0.1</td>
 
−
<td>rkABV2100</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2018-9-11</td>
 
−
<td>MP</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android 6.0.1</td>
 
−
<td>rkABV2500</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2019-5-17</td>
 
−
<td>Alpha</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android 6.0.1</td>
 
−
<td>rkABV2600</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2019-11-18</td>
 
−
<td>MP</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>zengwei</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android 6.0.1</td>
 
−
<td>rkABV2800</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2021-04-12</td>
 
−
<td>MP</td>
 
−
<td><a href="Media%3ARSB-4680.pdf"><i><font color="#0066cc">Release Note</font></i></a></td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android8.1</td>
 
−
<td>rkABV0001</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2019-07-04</td>
 
−
<td>Alpha</td>
 
−
<td>&nbsp;</td>
 
−
<td>
 
−
<p><a alt="https://pan.baidu.com/s/1wAuWQ4xlJ0CUrwRuhEcZww" href="https://pan.baidu.com/s/1wAuWQ4xlJ0CUrwRuhEcZww" title="https://pan.baidu.com/s/1wAuWQ4xlJ0CUrwRuhEcZww"><font color="#0066cc">Binary OS Image</font></a></p>
 
  
−
<p><font color="#0066cc">Code:</font><b>frj0</b></p>
+
[[GPIO接口|GPIO接口]]
−
</td>
 
−
<td>
 
−
<p><a alt="https://pan.baidu.com/s/1WyyT98UDp4KSXyIqD5p5yA" href="https://pan.baidu.com/s/1WyyT98UDp4KSXyIqD5p5yA" title="https://pan.baidu.com/s/1WyyT98UDp4KSXyIqD5p5yA"><font color="#0066cc">FW Tool</font></a></p>
 
  
−
<p><font color="#0066cc">Code:</font><b>s7k3</b></p>
+
[[MINI_PCIE接口|MINI PCIE接口]]
−
</td>
 
−
<td>&nbsp;</td>
 
−
<td>zengwei</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android8.1</td>
 
−
<td>
 
−
<p>O8_AIV1100</p>
 
  
−
<h4>&nbsp;</h4>
+
[[M.2接口|M.2接口]]
−
</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2019-12-19</td>
 
−
<td>Alpha</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>zengwei</td>
 
−
</tr>
 
−
<tr>
 
−
<td>Android8.1</td>
 
−
<td>O8_AIV1200</td>
 
−
<td>RSB-4680</td>
 
−
<td>RK3288</td>
 
−
<td>2020-03-04</td>
 
−
<td>Alpha</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>zengwei</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<h2><b>Linux &amp; Android 燒錄方法 (Linux &amp; Android Flash eMMC Method)</b></h2>
+
[[SPI，I2C接口|SPI，I2C接口]]
  
−
<p><b><span style="color:#FF0000;">NOTE&nbsp;:&nbsp;</span></b></p>
+
[[Jumper_List|Jumper List]]
  
−
<p>This way only support Linux(Debian9) upgrade to Linux(Debian9) 、&nbsp;Android6.0 upgrade to Android6.0 or&nbsp;Android8.1&nbsp;upgrade to Android8.1.</p>
+
&nbsp;
  
−
<p>If the device is in Android, you want to upgrade to&nbsp;Linux(Debian9), please use Android Tool.</p>
+
=== '''&nbsp;机械尺寸&nbsp; ('''Mechanical Characteristics) ===
  
−
<h3><b><span style="color:#FF0000;">方法一(Method 1)：</span>Update through Android Tool</b></h3>
+
[[File:Board Dimension Layout (Top Side).png|RTENOTITLE]]
  
−
<p><b>&nbsp;Step0:</b>&nbsp; Need to use Micro USB to connect with RSB-4680 OTG port, and other Type-A USB to connect with your PC&nbsp;</p>
+
[[File:Board Dimension Layout (Top Side)2.png|RTENOTITLE]]
  
−
<p><img _fck_mw_filename="MicroUSB 4680.png" _fck_mw_origimgheight="334" _fck_mw_origimgwidth="478" alt="RTENOTITLE" src="/wiki/images/4/44/MicroUSB_4680.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
&nbsp;
  
−
<p><b>Step1:</b> Double click DriverInstall.exe .</p>
+
== '''快速入门 (Quick Start)''' ==
  
−
<p><img _fck_mw_filename="RK3288 Debian9 AndroidTool DriverAssitant v4.6.jpg" _fck_mw_origimgheight="288" _fck_mw_origimgwidth="624" alt="RTENOTITLE" src="/wiki/images/2/25/RK3288_Debian9_AndroidTool_DriverAssitant_v4.6.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
== &nbsp; &nbsp; &nbsp;系统下载 (OS Download) ==
  
−
<p><b>Step2:</b>&nbsp; Enter into MASKROM mode .</p>
+
*'''Debian 9'''
 +
**[https://pan.baidu.com/s/1SH2TTLNAQhliF3RNq1bHVw Pan.Baidu_Link_for_RK3288]&nbsp; Password&nbsp;:&nbsp;4jvr
 +
**[https://www.dropbox.com/sh/bymsb6fnt08vu2e/AAAH9tHhnCKM4Go8Advdeqdga?dl=0 Dropbox Link for RK3288]&nbsp; 
  
−
<p>There are two ways to enter MASKROM .</p>
+
{| border="1" cellpadding="0" cellspacing="0" style="width: 925px;"
 +
|-
 +
|
 +
'''Git BSP Tag Version'''
  
−
<p><b>1. Hardware way to enter MASKROM</b></p>
+
|
 +
'''Product'''
  
−
<p>（1）Connect PIN2-PIN1 of CN19 to Disable eMMC，reboot device to enter MASKROM mode.</p>
+
| &nbsp;'''BSP/Image'''
 +
|
 +
'''Date'''
  
−
<p>（2）After device enter into MASKROM mode，then connect PIN2-PIN3&nbsp;of CN19 to Enable eMMC.</p>
+
|
 +
'''Alpha Release'''
  
−
<p>RSB-4680&nbsp;Connector Layout&nbsp;:&nbsp;</p>
+
|
 +
'''Beta Release'''
  
−
<p><img _fck_mw_filename="RK3288 Debian9 AndroidTool connector CN19.jpg" _fck_mw_origimgheight="388" _fck_mw_origimgwidth="554" alt="RTENOTITLE" src="/wiki/images/8/8b/RK3288_Debian9_AndroidTool_connector_CN19.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
|
 +
'''MP Release'''
  
−
<p>RSB-4680 CN19 PIN define&nbsp;:&nbsp;</p>
+
|
 +
'''Release Note'''
  
−
<p><img _fck_mw_filename="RK3288 Debian9 AndroidTool CN19.jpg" _fck_mw_origimgheight="299" _fck_mw_origimgwidth="696" alt="RTENOTITLE" src="/wiki/images/4/41/RK3288_Debian9_AndroidTool_CN19.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
| style="width: 131px;" |
 +
'''Comment'''
  
−
<p><b>2. Software way to enter MASKROM</b></p>
+
| style="width: 124px;" |
 +
'''Release Owner'''
  
−
<p>When the device boot up to debian, you can use Terminal or Debug port to input the following command&nbsp;:</p>
+
|-
 +
|
 +
RK3288LBV2100
  
−
<p>sudo reboot loader</p>
+
|
 +
RSB-4680
  
−
<p>Click &quot;Advantech Function&quot; , then &quot;Enter MASHROM&quot; button to enter MASHROM mode .</p>
+
| &nbsp;
 +
|
 +
2019-05-27
  
−
<p><img _fck_mw_filename="RK3288 upgrade Loader MASHROM.png" _fck_mw_origimgheight="466" _fck_mw_origimgwidth="915" alt="RTENOTITLE" src="/wiki/images/4/4a/RK3288_upgrade_Loader_MASHROM.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
|
 +
&nbsp;
  
−
<p><b>Step3: </b>Select the image path .&nbsp;</p>
+
|
 +
&nbsp;V
  
−
<p><img _fck_mw_filename="RK3288 Debian9 AndroidTool select image.jpg" _fck_mw_origimgheight="466" _fck_mw_origimgwidth="915" alt="RTENOTITLE" src="/wiki/images/d/dc/RK3288_Debian9_AndroidTool_select_image.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
|
 +
&nbsp;
  
−
<p>&nbsp;</p>
+
|
 +
&nbsp;
  
−
<p><b>Step4&nbsp;:&nbsp;</b>Click update button to upgrade images .</p>
+
| style="width: 131px;" | 1.for QA test<br/> 2.release for PM
 +
| style="width: 124px;" |
 +
Yunjin.Jiang
  
−
<p><img _fck_mw_filename="RK3288 Debian9 AndroidTool update.jpg" _fck_mw_origimgheight="466" _fck_mw_origimgwidth="915" alt="RTENOTITLE" src="/wiki/images/9/92/RK3288_Debian9_AndroidTool_update.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
|-
 +
| RK3288DIV2104
 +
| RSB-4680
 +
| &nbsp;
 +
| 2020-04-21
 +
| &nbsp;
 +
| V
 +
| &nbsp;
 +
| &nbsp;
 +
| style="width: 131px;" | 1.for QA test<br/> 2.release for PM
 +
| style="width: 124px;" | Yunjin.Jiang
 +
|-
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| <
 +
| style="width: 131px;" | &nbsp;
 +
| style="width: 124px;" | &nbsp;
 +
|-
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| style="width: 131px;" | &nbsp;
 +
| style="width: 124px;" | &nbsp;
 +
|}
  
−
<p><b>Step5&nbsp;:</b>&nbsp;When&ldquo;下載完成(Download finish )&rdquo; , please unplug the Micro USB with RSB-4680 , then turn off and turn on the power again .</p>
+
*'''Debian 10'''
  
−
<p><img _fck_mw_filename="Finished 4680.png" _fck_mw_origimgheight="553" _fck_mw_origimgwidth="1084" alt="RTENOTITLE" src="/wiki/images/6/61/Finished_4680.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
    TBD
  
−
<p><b>Step6&nbsp;:&nbsp;</b>Please remove the Micro USB and the poewer , then&nbsp;reboot the device , you will see the Debian Desktop.&nbsp;</p>
+
*'''&nbsp;Android'''
  
−
<p><img _fck_mw_filename="Debian 4680.jpg" _fck_mw_origimgheight="480" _fck_mw_origimgwidth="640" alt="RTENOTITLE" src="/wiki/images/0/03/Debian_4680.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
{| border="1" cellpadding="0" cellspacing="0" width="894"
 +
|-
 +
| Android version
 +
|
 +
Git BSP Tag Version
  
−
<h3><b><span style="color:#FF0000;">方法二(Method 2)：</span></b>Update image through SD-Card&nbsp;</h3>
+
|
 +
Product
  
−
<p>Download SD DiskTool</p>
+
|
 +
CPU
  
−
<p><a alt="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0" href="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0" title="https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0">https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0</a>&nbsp;</p>
+
|
 +
Date
  
−
<p>Step 1&nbsp;:&nbsp;Put images to AndroidTool/rockdev/image, Make sure path is correct.</p>
+
|
 +
Release
  
−
<p><img _fck_mw_filename="Filepath.jpg" _fck_mw_origimgheight="362" _fck_mw_origimgwidth="684" alt="RTENOTITLE" src="/wiki/images/0/05/Filepath.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
|
 +
Release Note
  
−
<p>Step 2&nbsp;:&nbsp;Double click rk3328-mkupdate.bat in&nbsp;AndroidTool/rockdev/ .</p>
+
|
 +
Download Path
  
−
<p>If there is no error, you will find&nbsp;update.img&nbsp;in&nbsp;AndroidTool/rockdev/ .</p>
+
|
 +
FW Tool
  
−
<h3><b>Generate SD card</b></h3>
+
|
 +
Comment
  
−
<p>Step 1&nbsp;: Insert SD card to PC，&nbsp;Double click&nbsp;SD_Firmware_Tool.exe in&nbsp;SDDiskTool .</p>
+
|
 +
Release Owner
  
−
<p>Step 2&nbsp;: Choose SD card .</p>
+
|-
 +
| Android 6.0.1
 +
| rkABV1000
 +
| RSB-4680
 +
| RK3288
 +
| 2018-7-10
 +
| Alpha
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| zengwei
 +
|-
 +
| Android8.1
 +
|
 +
O8_AIV1100
  
−
<p><img _fck_mw_filename="Choosesd.jpg" _fck_mw_origimgheight="422" _fck_mw_origimgwidth="496" alt="RTENOTITLE" src="/wiki/images/0/00/Choosesd.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
| RSB-4680
 +
| RK3288
 +
| 2019-12-19
 +
| Alpha
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| zengwei
 +
|-
 +
| Android8.1
 +
| O8_AIV1200
 +
| RSB-4680
 +
| RK3288
 +
| 2020-03-04
 +
| Alpha
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| zengwei
 +
|}
  
−
<p>Step 3&nbsp;: Choose update.img .</p>
+
== '''Linux & Android 燒錄方法 (Linux & Android Flash eMMC Method)''' ==
  
−
<p><img _fck_mw_filename="Chooseupdateimage.jpg" _fck_mw_origimgheight="422" _fck_mw_origimgwidth="496" alt="RTENOTITLE" src="/wiki/images/d/d3/Chooseupdateimage.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''<span style="color:#FF0000;">NOTE&nbsp;:&nbsp;</span>'''
  
−
<p>Step 4&nbsp;: Create SD card .</p>
+
This way only support Linux(Debian9) upgrade to Linux(Debian9) 、&nbsp;Android6.0 upgrade to Android6.0 or&nbsp;Android8.1&nbsp;upgrade to Android8.1.
  
−
<p><img _fck_mw_filename="Create sd.jpg" _fck_mw_origimgheight="422" _fck_mw_origimgwidth="496" alt="RTENOTITLE" src="/wiki/images/d/d5/Create_sd.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
If the device is in Android, you want to upgrade to&nbsp;Linux(Debian9), please use Android Tool.
  
−
<p><span style="color:#FF0000;"><b>NOTE&nbsp;:&nbsp;</b></span></p>
+
=== '''<span style="color:#FF0000;">方法一(Method 1)：</span>Update through Android Tool''' ===
  
−
<p>The capacity of SD card is at least 4GB.</p>
+
=== '''Step0:'''&nbsp; Need to use Micro USB to connect with RSB-4680 OTG port, and other Type-A USB to connect with your PC ===
  
−
<h3><b>Upgrade image from SD card</b></h3>
+
[[File:MicroUSB 4680.png|RTENOTITLE]]
  
−
<p>Step 1&nbsp;:&nbsp;Insert SD card to device .</p>
+
=== '''Step1:''' Double click DriverInstall.exe . ===
  
−
<p>Step 2&nbsp;: Power up or reboot device， it will boot from SD card to auto upgrade images .</p>
+
[[File:RK3288 Debian9 AndroidTool DriverAssitant v4.6.jpg|RTENOTITLE]]
  
−
<p>Step 3&nbsp;: When upgrade is finish, you will get &quot;Doing Actions succeeded,please remove sdcard......&quot; on screen or debug console .</p>
+
&nbsp;
  
−
<p><img _fck_mw_filename="RK3288 Debian9 sdupdate screen information.jpg" _fck_mw_origimgheight="348" _fck_mw_origimgwidth="568" alt="RTENOTITLE" src="/wiki/images/a/a3/RK3288_Debian9_sdupdate_screen_information.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''Step2:'''&nbsp; Enter into MASKROM mode .
  
−
<p>Step 4&nbsp;: Remove SD card， the device will auto reboot .</p>
+
There are two ways to enter MASKROM .
  
−
<h2><b>Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)</b></h2>
+
'''1. Hardware way to enter MASKROM'''
  
−
<h3><b>User Guide</b></h3>
+
（1）Connect PIN2-PIN1 of CN19 to Disable eMMC，reboot device to enter MASKROM mode.
  
−
<ul>
+
（2）After device enter into MASKROM mode，then connect PIN2-PIN3&nbsp;of CN19 to Enable eMMC.
−
<li><a href="Linux%20BSP%20build%20and%20update%20image.">Linux BSP build and update image.</a></li>
 
−
<li><a href="Environment%20set%20up.">Environment_set_up.</a></li>
 
−
<li><a href="How%20to%20do.">How_to_do.</a></li>
 
−
<li><a href="RK3288%20qt5Creater.">RK3288_qt5Creater.</a></li>
 
−
<li><a href="Qt5Creater%20toolchain%20Qt%205.11.3">qt5Creater_toolchain_Qt_5.11.3</a></li>
 
−
<li><a href="How%20to%20flash%20the%20Debian%20image%20into%20RSB-4680">How_to flash_the_Debian_image_into_RSB-4680</a></li>
 
−
</ul>
 
  
−
<h2><b>Android BSP編譯方法(Android BSP Compile Method)</b></h2>
+
RSB-4680&nbsp;Connector Layout&nbsp;:&nbsp;
  
−
<h3><b>User Guide</b></h3>
+
[[File:RK3288 Debian9 AndroidTool connector CN19.jpg|RTENOTITLE]]
  
−
<ul>
+
RSB-4680 CN19 PIN define&nbsp;:&nbsp;
−
<li><a href="IoTGateway%2FBSP%2FAndroid%2FApplicationDevelopGuide">Application Develop Guide</a></li>
 
−
</ul>
 
  
−
<h3><b>Android 6.0.1&nbsp;</b></h3>
+
[[File:RK3288 Debian9 AndroidTool CN19.jpg|RTENOTITLE]]
  
−
<ul>
+
'''2. Software way to enter MASKROM'''
−
<li><a href="IoTGateway%2FBSP%2FAndroid%2FAndroid%20BSP%20User%20Guide%206.0.1%20for%20rk">IoTGateway/BSP/Android/Android BSP User Guide 6.0.1 for rk</a></li>
 
−
</ul>
 
  
−
<h3><b>Android 8.1.0</b></h3>
+
When the device boot up to debian, you can use Terminal or Debug port to input the following command&nbsp;:
  
−
<ul>
+
sudo reboot loader
−
<li><a href="IoTGateway%2FBSP%2FAndroid%2FAndroid%20BSP%20User%20Guide%208.1.0%20for%20rk">IoTGateway/BSP/Android/Android BSP User Guide 8.1.0 for rk</a></li>
 
−
</ul>
 
  
−
<h2><b>通用方法(General Method)</b></h2>
+
Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .
  
−
<h3><b>查看CPU温度(Check CPU Temperature)</b></h3>
+
[[File:RK3288 upgrade Loader MASHROM.png|RTENOTITLE]]
  
−
<pre>
+
&nbsp;
−
root@linaro-alip:/# cat /sys/class/thermal/thermal_zone0/temp
+
 
 +
'''Step3: '''Select the image path .&nbsp;
 +
 
 +
[[File:RK3288 Debian9 AndroidTool select image.jpg|RTENOTITLE]]
 +
 
 +
&nbsp;
 +
 
 +
'''Step4&nbsp;:&nbsp;'''Click update button to upgrade images .
 +
 
 +
[[File:RK3288 Debian9 AndroidTool update.jpg|RTENOTITLE]]
 +
 
 +
'''Step5&nbsp;:'''&nbsp;When“下載完成(Download finish )” , please unplug the Micro USB with RSB-4680 , then turn off and turn on the power again .
 +
 
 +
[[File:Finished 4680.png|RTENOTITLE]]
 +
 
 +
'''Step6&nbsp;:&nbsp;'''Please remove the Micro USB and the poewer , then&nbsp;reboot the device , you will see the Debian Desktop.&nbsp;
 +
 
 +
[[File:Debian 4680.jpg|RTENOTITLE]]
 +
 
 +
'''<span style="color:#FF0000;">方法二(Method 2)：</span>'''Update image through SD-Card&nbsp;
 +
 
 +
Download SD DiskTool
 +
 
 +
Step 1&nbsp;:&nbsp;Put images to AndroidTool/rockdev/image, Make sure path is correct.
 +
 
 +
[[File:Filepath.jpg|RTENOTITLE]]
 +
 
 +
Step 2&nbsp;:&nbsp;Double click rk3328-mkupdate.bat in&nbsp;AndroidTool/rockdev/ .
 +
 
 +
If there is no error, you will find&nbsp;update.img&nbsp;in&nbsp;AndroidTool/rockdev/ .
 +
 
 +
=== '''Generate SD card''' ===
 +
 
 +
Step 1&nbsp;: Insert SD card to PC，&nbsp;Double click&nbsp;SD_Firmware_Tool.exe in&nbsp;SDDiskTool .
 +
 
 +
Step 2&nbsp;: Choose SD card .
 +
 
 +
[[File:Choosesd.jpg|RTENOTITLE]]
 +
 
 +
Step 3&nbsp;: Choose update.img .
 +
 
 +
[[File:Chooseupdateimage.jpg|RTENOTITLE]]
 +
 
 +
Step 4&nbsp;: Create SD card .
 +
 
 +
[[File:Create sd.jpg|RTENOTITLE]]
 +
 
 +
<span style="color:#FF0000;">'''NOTE&nbsp;:&nbsp;'''</span>
 +
 
 +
The capacity of SD card is at least 4GB.
 +
 
 +
=== '''Upgrade image from SD card''' ===
 +
 
 +
Step 1&nbsp;:&nbsp;Insert SD card to device .
 +
 
 +
Step 2&nbsp;: Power up or reboot device， it will boot from SD card to auto upgrade images .
 +
 
 +
Step 3&nbsp;: When upgrade is finish, you will get "Doing Actions succeeded,please remove sdcard......" on screen or debug console .
 +
 
 +
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; [[File:RK3288 Debian9 sdupdate screen information.jpg|RTENOTITLE]]
 +
 
 +
Step 4&nbsp;: Remove SD card， the device will auto reboot .
 +
 
 +
== '''Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)''' ==
 +
 
 +
=== '''User Guide''' ===
 +
 
 +
[[Linux_BSP_build_and_update_image.|Linux BSP build and update image.]]
 +
 
 +
[[Environment_set_up.|Environment_set_up.]]
 +
 
 +
[[How_to_do.|How_to_do.]]
 +
 
 +
[[RK3288_qt5Creater.|RK3288_qt5Creater.]]
 +
 
 +
[[RK3288_qt5Creater.|RK3288_qt5Creater.]] |[[RK3288_qt5Creater.|RK3288_qt5Creater.]]
 +
 
 +
[[How_to_flash_the_Debian_image_into_RSB-4680|How_to flash_the_Debian_image_into_RSB-4680]]
 +
 
 +
&nbsp;
 +
 
 +
== '''Android BSP編譯方法(Android BSP Compile Method)''' ==
 +
 
 +
=== '''User Guide''' ===
 +
 
 +
[[Application_Develop_Guide|Application Develop Guide]]
 +
 
 +
&nbsp;
 +
 
 +
=== '''Android 6.0.1&nbsp;''' ===
 +
 
 +
[[IoTGateway/BSP/Android/Android_BSP_User_Guide_6.0.1_for_rk|IoTGateway/BSP/Android/Android BSP User Guide 6.0.1 for rk]]
 +
 
 +
&nbsp;
 +
 
 +
=== '''Android 8.1.0''' ===
 +
 
 +
[[IoTGateway/BSP/Android/Android_BSP_User_Guide_8.1.0_for_rk|IoTGateway/BSP/Android/Android BSP User Guide 8.1.0 for rk]]
 +
 
 +
&nbsp;
 +
 
 +
== '''通用方法(General Method)''' ==
 +
 
 +
=== '''查看CPU温度(Check CPU Temperature)''' ===
 +
<pre>root@linaro-alip:/# cat /sys/class/thermal/thermal_zone0/temp
 
42769
 
42769
 
</pre>
 
</pre>
  
−
<h3><b>查看CPU频率(Check CPU Frequency)</b></h3>
+
=== '''查看CPU频率(Check CPU Frequency)''' ===
−
 
+
<pre>cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq  
−
<pre>
 
−
cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq  
 
 
600000
 
600000
 
cat /sys/devices/system/cpu/cpufreq/policy4/scaling_cur_freq     
 
cat /sys/devices/system/cpu/cpufreq/policy4/scaling_cur_freq     
Line 683: Line 491:
 
</pre>
 
</pre>
  
−
<h3><b>查看GPU温度(Check GPU Temperature)</b></h3>
+
=== '''查看GPU温度(Check GPU Temperature)''' ===
−
 
+
<pre>root@linaro-alip:/# cat /sys/class/thermal/thermal_zone1/temp
−
<pre>
 
−
root@linaro-alip:/# cat /sys/class/thermal/thermal_zone1/temp
 
 
43042</pre>
 
43042</pre>
  
−
<h3><b>查看GPU频率(Check GPU Frequency)</b></h3>
+
=== '''查看GPU频率(Check GPU Frequency)''' ===
−
 
+
<pre>root@linaro-alip:/# cat /sys/class/devfreq/ffa30000.gpu/cur_freq
−
<pre>
 
−
root@linaro-alip:/# cat /sys/class/devfreq/ffa30000.gpu/cur_freq
 
 
200000000
 
200000000
 
</pre>
 
</pre>
  
−
<h3><b>查看DDR频率(Check DDR Frequency)</b></h3>
+
=== '''查看DDR频率(Check DDR Frequency)''' ===
−
 
+
<pre>root@linaro-alip:/# cat /sys/class/devfreq/dmc/cur_freq
−
<pre>
 
−
root@linaro-alip:/# cat /sys/class/devfreq/dmc/cur_freq
 
 
0
 
0
 
</pre>
 
</pre>
  
−
<h3><b>查看存储容量(Check Storage Capacity)</b></h3>
+
=== '''查看存储容量(Check Storage Capacity)''' ===
−
 
+
<pre>root@linaro-alip:/# df -h
−
<pre>
+
Filesystem &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp;Size &amp;amp;nbsp;Used Avail Use% Mounted on
−
root@linaro-alip:/# df -h
+
/dev/root &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; 3.9G &amp;amp;nbsp;2.5G &amp;amp;nbsp;1.3G &amp;amp;nbsp;67% /
−
Filesystem &amp;nbsp; &amp;nbsp; &amp;nbsp;Size &amp;nbsp;Used Avail Use% Mounted on
+
devtmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp;991M &amp;amp;nbsp;8.0K &amp;amp;nbsp;991M &amp;amp;nbsp; 1% /dev
−
/dev/root &amp;nbsp; &amp;nbsp; &amp;nbsp; 3.9G &amp;nbsp;2.5G &amp;nbsp;1.3G &amp;nbsp;67% /
+
tmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp;1000M &amp;amp;nbsp; &amp;amp;nbsp; 0 1000M &amp;amp;nbsp; 0% /dev/shm
−
devtmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;991M &amp;nbsp;8.0K &amp;nbsp;991M &amp;nbsp; 1% /dev
+
tmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp;1000M &amp;amp;nbsp;8.9M &amp;amp;nbsp;991M &amp;amp;nbsp; 1% /run
−
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;1000M &amp;nbsp; &amp;nbsp; 0 1000M &amp;nbsp; 0% /dev/shm
+
tmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; 5.0M &amp;amp;nbsp;4.0K &amp;amp;nbsp;5.0M &amp;amp;nbsp; 1% /run/lock
−
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;1000M &amp;nbsp;8.9M &amp;nbsp;991M &amp;nbsp; 1% /run
+
tmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp;1000M &amp;amp;nbsp; &amp;amp;nbsp; 0 1000M &amp;amp;nbsp; 0% /sys/fs/cgroup
−
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; 5.0M &amp;nbsp;4.0K &amp;nbsp;5.0M &amp;nbsp; 1% /run/lock
+
/dev/mmcblk1p9 &amp;amp;nbsp;3.1G &amp;amp;nbsp;3.3M &amp;amp;nbsp;3.1G &amp;amp;nbsp; 1% /userdata
−
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;1000M &amp;nbsp; &amp;nbsp; 0 1000M &amp;nbsp; 0% /sys/fs/cgroup
+
/dev/mmcblk1p7 &amp;amp;nbsp; 63M &amp;amp;nbsp; 13M &amp;amp;nbsp; 48M &amp;amp;nbsp;21% /oem
−
/dev/mmcblk1p9 &amp;nbsp;3.1G &amp;nbsp;3.3M &amp;nbsp;3.1G &amp;nbsp; 1% /userdata
+
tmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; 200M &amp;amp;nbsp;8.0K &amp;amp;nbsp;200M &amp;amp;nbsp; 1% /run/user/1000
−
/dev/mmcblk1p7 &amp;nbsp; 63M &amp;nbsp; 13M &amp;nbsp; 48M &amp;nbsp;21% /oem
+
tmpfs &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; 200M &amp;amp;nbsp; &amp;amp;nbsp; 0 &amp;amp;nbsp;200M &amp;amp;nbsp; 0% /run/user/0
−
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; 200M &amp;nbsp;8.0K &amp;nbsp;200M &amp;nbsp; 1% /run/user/1000
 
−
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; 200M &amp;nbsp; &amp;nbsp; 0 &amp;nbsp;200M &amp;nbsp; 0% /run/user/0
 
 
</pre>
 
</pre>
  
−
<h3><b>网路Ping測試(Ping Network Testing)</b></h3>
+
=== '''网路Ping測試(Ping Network Testing)''' ===
−
 
 
−
<p><b>Command：ifconfig</b></p>
 
  
−
<pre>
+
'''Command：ifconfig'''
−
root@linaro-alip:~# ifconfig
+
<pre>root@linaro-alip:~# ifconfig
−
docker0: flags=4099&lt;UP,BROADCAST,MULTICAST&gt; &amp;nbsp;mtu 1500
+
docker0: flags=4099&amp;lt;UP,BROADCAST,MULTICAST&amp;gt; &amp;amp;nbsp;mtu 1500
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet 172.17.0.1 &amp;nbsp;netmask 255.255.0.0 &amp;nbsp;broadcast 172.17.255.255
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; inet 172.17.0.1 &amp;amp;nbsp;netmask 255.255.0.0 &amp;amp;nbsp;broadcast 172.17.255.255
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; ether 02:42:9d:3a:25:6f &amp;nbsp;txqueuelen 0 &amp;nbsp;(Ethernet)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; ether 02:42:9d:3a:25:6f &amp;amp;nbsp;txqueuelen 0 &amp;amp;nbsp;(Ethernet)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX packets 0 &amp;nbsp;bytes 0 (0.0 B)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; RX packets 0 &amp;amp;nbsp;bytes 0 (0.0 B)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX errors 0 &amp;nbsp;dropped 0 &amp;nbsp;overruns 0 &amp;nbsp;frame 0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; RX errors 0 &amp;amp;nbsp;dropped 0 &amp;amp;nbsp;overruns 0 &amp;amp;nbsp;frame 0
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX packets 0 &amp;nbsp;bytes 0 (0.0 B)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; TX packets 0 &amp;amp;nbsp;bytes 0 (0.0 B)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX errors 0 &amp;nbsp;dropped 0 overruns 0 &amp;nbsp;carrier 0 &amp;nbsp;collisions 0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; TX errors 0 &amp;amp;nbsp;dropped 0 overruns 0 &amp;amp;nbsp;carrier 0 &amp;amp;nbsp;collisions 0
  
−
eth0: flags=4163&lt;UP,BROADCAST,RUNNING,MULTICAST&gt; &amp;nbsp;mtu 1500
+
eth0: flags=4163&amp;lt;UP,BROADCAST,RUNNING,MULTICAST&amp;gt; &amp;amp;nbsp;mtu 1500
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet 192.168.127.100 &amp;nbsp;netmask 255.255.255.0 &amp;nbsp;broadcast 192.168.127.255
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; inet 192.168.127.100 &amp;amp;nbsp;netmask 255.255.255.0 &amp;amp;nbsp;broadcast 192.168.127.255
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet6 fe80::3269:bcb5:eaa7:b6b7 &amp;nbsp;prefixlen 64 &amp;nbsp;scopeid 0x20&lt;link&gt;
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; inet6 fe80::3269:bcb5:eaa7:b6b7 &amp;amp;nbsp;prefixlen 64 &amp;amp;nbsp;scopeid 0x20&amp;lt;link&amp;gt;
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; ether c4:00:ad:41:6d:fb &amp;nbsp;txqueuelen 1000 &amp;nbsp;(Ethernet)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; ether c4:00:ad:41:6d:fb &amp;amp;nbsp;txqueuelen 1000 &amp;amp;nbsp;(Ethernet)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX packets 175 &amp;nbsp;bytes 16715 (16.3 KiB)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; RX packets 175 &amp;amp;nbsp;bytes 16715 (16.3 KiB)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX errors 0 &amp;nbsp;dropped 0 &amp;nbsp;overruns 0 &amp;nbsp;frame 0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; RX errors 0 &amp;amp;nbsp;dropped 0 &amp;amp;nbsp;overruns 0 &amp;amp;nbsp;frame 0
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX packets 109 &amp;nbsp;bytes 7172 (7.0 KiB)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; TX packets 109 &amp;amp;nbsp;bytes 7172 (7.0 KiB)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX errors 0 &amp;nbsp;dropped 0 overruns 0 &amp;nbsp;carrier 0 &amp;nbsp;collisions 0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; TX errors 0 &amp;amp;nbsp;dropped 0 overruns 0 &amp;amp;nbsp;carrier 0 &amp;amp;nbsp;collisions 0
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; device interrupt 44
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; device interrupt 44
  
−
lo: flags=73&lt;UP,LOOPBACK,RUNNING&gt; &amp;nbsp;mtu 65536
+
lo: flags=73&amp;lt;UP,LOOPBACK,RUNNING&amp;gt; &amp;amp;nbsp;mtu 65536
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet 127.0.0.1 &amp;nbsp;netmask 255.0.0.0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; inet 127.0.0.1 &amp;amp;nbsp;netmask 255.0.0.0
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet6&amp;nbsp;::1 &amp;nbsp;prefixlen 128 &amp;nbsp;scopeid 0x10&lt;host&gt;
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; inet6&amp;amp;nbsp;::1 &amp;amp;nbsp;prefixlen 128 &amp;amp;nbsp;scopeid 0x10&amp;lt;host&amp;gt;
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; loop &amp;nbsp;txqueuelen 1 &amp;nbsp;(Local Loopback)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; loop &amp;amp;nbsp;txqueuelen 1 &amp;amp;nbsp;(Local Loopback)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX packets 980 &amp;nbsp;bytes 66000 (64.4 KiB)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; RX packets 980 &amp;amp;nbsp;bytes 66000 (64.4 KiB)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX errors 0 &amp;nbsp;dropped 0 &amp;nbsp;overruns 0 &amp;nbsp;frame 0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; RX errors 0 &amp;amp;nbsp;dropped 0 &amp;amp;nbsp;overruns 0 &amp;amp;nbsp;frame 0
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX packets 980 &amp;nbsp;bytes 66000 (64.4 KiB)
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; TX packets 980 &amp;amp;nbsp;bytes 66000 (64.4 KiB)
−
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX errors 0 &amp;nbsp;dropped 0 overruns 0 &amp;nbsp;carrier 0 &amp;nbsp;collisions 0
+
&amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; &amp;amp;nbsp; TX errors 0 &amp;amp;nbsp;dropped 0 overruns 0 &amp;amp;nbsp;carrier 0 &amp;amp;nbsp;collisions 0
 
</pre>
 
</pre>
  
−
<h4><b>Command：Ping&nbsp;192.168.127.100</b></h4>
+
==== '''Command：Ping&nbsp;192.168.127.100''' ====
−
 
+
<pre>root@linaro-alip:~# ping 192.168.127.100
−
<pre>
+
PING &amp;lt;span style=&amp;quot;color:#FF0000;&amp;quot;&amp;gt;192.168.127.100&amp;lt;/span&amp;gt; (192.168.127.100) 56(84) bytes of data.
−
root@linaro-alip:~# ping 192.168.127.100
 
−
PING &lt;span style=&quot;color:#FF0000;&quot;&gt;192.168.127.100&lt;/span&gt; (192.168.127.100) 56(84) bytes of data.
 
 
64 bytes from 192.168.127.100: icmp_seq=1 ttl=64 time=0.200 ms
 
64 bytes from 192.168.127.100: icmp_seq=1 ttl=64 time=0.200 ms
 
64 bytes from 192.168.127.100: icmp_seq=2 ttl=64 time=0.161 ms
 
64 bytes from 192.168.127.100: icmp_seq=2 ttl=64 time=0.161 ms
 
64 bytes from 192.168.127.100: icmp_seq=3 ttl=64 time=0.147 ms
 
64 bytes from 192.168.127.100: icmp_seq=3 ttl=64 time=0.147 ms
 
^C
 
^C
−
--- &lt;span style=&quot;color:#FF0000;&quot;&gt;192.168.127.100&lt;/span&gt; ping statistics ---
+
--- &amp;lt;span style=&amp;quot;color:#FF0000;&amp;quot;&amp;gt;192.168.127.100&amp;lt;/span&amp;gt; ping statistics ---
 
3 packets transmitted, 3 received, 0% packet loss, time 2ms
 
3 packets transmitted, 3 received, 0% packet loss, time 2ms
 
rtt min/avg/max/mdev = 0.147/0.169/0.200/0.024 ms</pre>
 
rtt min/avg/max/mdev = 0.147/0.169/0.200/0.024 ms</pre>
  
−
<h3><b>設置RTC (RTC Setting)&nbsp;</b></h3>
+
=== '''設置RTC (RTC Setting)&nbsp;''' ===
−
 
+
<pre>root@linaro-alip:~# sudo su
−
<pre>
 
−
root@linaro-alip:~# sudo su
 
 
root@linaro-alip:~# date
 
root@linaro-alip:~# date
 
Tue Oct 26 08:16:04 UTC 2021
 
Tue Oct 26 08:16:04 UTC 2021
−
root@linaro-alip:~# date -s &quot;2022-9-1 13:00:00&quot;
+
root@linaro-alip:~# date -s &amp;quot;2022-9-1 13:00:00&amp;quot;
−
Thu Sep &amp;nbsp;1 13:00:00 UTC 2022
+
Thu Sep &amp;amp;nbsp;1 13:00:00 UTC 2022
 
root@linaro-alip:~# date
 
root@linaro-alip:~# date
−
Thu Sep &amp;nbsp;1 13:00:10 UTC 2022
+
Thu Sep &amp;amp;nbsp;1 13:00:10 UTC 2022
 
root@linaro-alip:~#hwclock -w
 
root@linaro-alip:~#hwclock -w
 
root@linaro-alip:~# hwclock
 
root@linaro-alip:~# hwclock
−
Thu Sep &amp;nbsp;1 13:01:07 2022 &amp;nbsp;0.000000 seconds
+
Thu Sep &amp;amp;nbsp;1 13:01:07 2022 &amp;amp;nbsp;0.000000 seconds
 
</pre>
 
</pre>
 +
 +
 +
{| border="0" cellpadding="10" cellspacing="0" style="width:100%;"
 +
|-
 +
| <iframe height="230" key="advonline" level="campaign" path="en/aim-linux_community/" width="100%"></iframe>
 +
|}

Latest revision as of 10:26, 19 May 2022

資源特性(Features)

  • Rockchip ARM Cortex-A17 RK3288 Quad Core, up to 1.6GHz
  • Onboard 2GB DDR3L memory and 8GB eMMC
  • HDMI 3840x2160 at 60Hz, VGA 1920x1200 at 60Hz, Dual Channel 18/24/30 bit LVDS
  • Support 4K H.264/H.265 Video decoder
  • 6 UART, 6 USB2.0, 1 GbE, 8 GPIO, 1 MIPI CSI, 1 SPI
  • M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
  • Support Linux and Android

訂購資訊(Ordering Information)

RTENOTITLE

 

接口布局和尺寸(Layout and Sizes)

RTENOTITLE

 

 

接口布局圖 Board Dimension Layout 

RTENOTITLE

RTENOTITLE

Connector List

BAT RTC Battery Connector
CN2 Audio
CN3 GPIO
CN4 18/24/30 bit Dual-Channel LVDS
LVDS_BL LVDS Backlight Control
CN5 Power Button & LED
CN7 Recover
CN16 12V DC Jack
CN20 Internal USB Pin Header
USB34 Dual Type A USB Connector
OTG Micro USB Connector
CN21 SPI
CN22 I2C
COM Internal RS232 (COM6 & COM7 with 12V/5V Power)
COM13 Internal RS232 (COM1 & COM3)
COM4 External COM (With RS232 &RS-485)
DEBUG COM2 or Console
HDMI HDMI
LAN LAN
M.2 M.2
MINIPCIE MINIPCIE
SD Micro SD
SIM1 Standard SIM
SW2 Reset Button
VGA VGA

接口引脚定義 (Pin definitions)

电池扣（RTC

串口（RS232_DB,RS232/485,Internal RS232)

显示接口（LVDS,LVDS_Balight,HDMI,VGA）

LAN接口(LAN)

USB接口（USB34,USB Pin header,OTG）

音频接口（Audio）

Mico SD&SIM Card

电源及指示灯和开关机复位按钮（DC Power,Power Button&LED,Recover,Reset Button）

GPIO接口

MINI PCIE接口

M.2接口

SPI，I2C接口

Jumper List

 

 机械尺寸  (Mechanical Characteristics)

RTENOTITLE

RTENOTITLE

 

快速入门 (Quick Start)

     系统下载 (OS Download)

Git BSP Tag Version

Product

 BSP/Image

Date

Alpha Release

Beta Release

MP Release

Release Note

Comment

Release Owner

RK3288LBV2100

RSB-4680

 

2019-05-27

 

 V

 

 

1.for QA test
2.release for PM

Yunjin.Jiang

RK3288DIV2104 RSB-4680   2020-04-21   V     1.for QA test
2.release for PM 		Yunjin.Jiang
              <    
                   
  • Debian 10 
    TBD
  •  Android
Android version

Git BSP Tag Version

Product

CPU

Date

Release

Release Note

Download Path

FW Tool

Comment

Release Owner

Android 6.0.1 rkABV1000 RSB-4680 RK3288 2018-7-10 Alpha         zengwei
Android8.1

O8_AIV1100

RSB-4680 RK3288 2019-12-19 Alpha         zengwei
Android8.1 O8_AIV1200 RSB-4680 RK3288 2020-03-04 Alpha         zengwei

Linux & Android 燒錄方法 (Linux & Android Flash eMMC Method)

NOTE : 

This way only support Linux(Debian9) upgrade to Linux(Debian9) 、 Android6.0 upgrade to Android6.0 or Android8.1 upgrade to Android8.1.

If the device is in Android, you want to upgrade to Linux(Debian9), please use Android Tool.

方法一(Method 1)：Update through Android Tool

Step0:  Need to use Micro USB to connect with RSB-4680 OTG port, and other Type-A USB to connect with your PC

RTENOTITLE

Step1: Double click DriverInstall.exe .

RTENOTITLE

 

Step2:  Enter into MASKROM mode .

There are two ways to enter MASKROM .

1. Hardware way to enter MASKROM

（1）Connect PIN2-PIN1 of CN19 to Disable eMMC，reboot device to enter MASKROM mode.

（2）After device enter into MASKROM mode，then connect PIN2-PIN3 of CN19 to Enable eMMC.

RSB-4680 Connector Layout : 

RTENOTITLE

RSB-4680 CN19 PIN define : 

RTENOTITLE

2. Software way to enter MASKROM

When the device boot up to debian, you can use Terminal or Debug port to input the following command :

sudo reboot loader

Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .

RTENOTITLE

 

Step3: Select the image path . 

RTENOTITLE

 

Step4 : Click update button to upgrade images .

RTENOTITLE

Step5 : When“下載完成(Download finish )” , please unplug the Micro USB with RSB-4680 , then turn off and turn on the power again .

RTENOTITLE

Step6 : Please remove the Micro USB and the poewer , then reboot the device , you will see the Debian Desktop. 

RTENOTITLE

方法二(Method 2)：Update image through SD-Card 

Download SD DiskTool

Step 1 : Put images to AndroidTool/rockdev/image, Make sure path is correct.

RTENOTITLE

Step 2 : Double click rk3328-mkupdate.bat in AndroidTool/rockdev/ .

If there is no error, you will find update.img in AndroidTool/rockdev/ .

Generate SD card

Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool .

Step 2 : Choose SD card .

RTENOTITLE

Step 3 : Choose update.img .

RTENOTITLE

Step 4 : Create SD card .

RTENOTITLE

NOTE : 

The capacity of SD card is at least 4GB.

Upgrade image from SD card

Step 1 : Insert SD card to device .

Step 2 : Power up or reboot device， it will boot from SD card to auto upgrade images .

Step 3 : When upgrade is finish, you will get "Doing Actions succeeded,please remove sdcard......" on screen or debug console .

                RTENOTITLE

Step 4 : Remove SD card， the device will auto reboot .

Linux系统的基本使用(Linux System Basic Operating Method)

User Guide

Linux BSP build and update image.

Environment_set_up.

How_to_do.

RK3288_qt5Creater.

RK3288_qt5Creater. |RK3288_qt5Creater.

How_to flash_the_Debian_image_into_RSB-4680

 

Android BSP編譯方法(Android BSP Compile Method)

User Guide

Application Develop Guide

 

Android 6.0.1 

IoTGateway/BSP/Android/Android BSP User Guide 6.0.1 for rk

 

Android 8.1.0

IoTGateway/BSP/Android/Android BSP User Guide 8.1.0 for rk

 

通用方法(General Method)

查看CPU温度(Check CPU Temperature)

root@linaro-alip:/# cat /sys/class/thermal/thermal_zone0/temp
42769

查看CPU频率(Check CPU Frequency)

cat /sys/devices/system/cpu/cpufreq/policy0/scaling_cur_freq 
600000
cat /sys/devices/system/cpu/cpufreq/policy4/scaling_cur_freq    
900000

查看GPU温度(Check GPU Temperature)

root@linaro-alip:/# cat /sys/class/thermal/thermal_zone1/temp
43042

查看GPU频率(Check GPU Frequency)

root@linaro-alip:/# cat /sys/class/devfreq/ffa30000.gpu/cur_freq
200000000

查看DDR频率(Check DDR Frequency)

root@linaro-alip:/# cat /sys/class/devfreq/dmc/cur_freq
0

查看存储容量(Check Storage Capacity)

root@linaro-alip:/# df -h
Filesystem &amp;nbsp; &amp;nbsp; &amp;nbsp;Size &amp;nbsp;Used Avail Use% Mounted on
/dev/root &amp;nbsp; &amp;nbsp; &amp;nbsp; 3.9G &amp;nbsp;2.5G &amp;nbsp;1.3G &amp;nbsp;67% /
devtmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;991M &amp;nbsp;8.0K &amp;nbsp;991M &amp;nbsp; 1% /dev
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;1000M &amp;nbsp; &amp;nbsp; 0 1000M &amp;nbsp; 0% /dev/shm
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;1000M &amp;nbsp;8.9M &amp;nbsp;991M &amp;nbsp; 1% /run
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; 5.0M &amp;nbsp;4.0K &amp;nbsp;5.0M &amp;nbsp; 1% /run/lock
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp;1000M &amp;nbsp; &amp;nbsp; 0 1000M &amp;nbsp; 0% /sys/fs/cgroup
/dev/mmcblk1p9 &amp;nbsp;3.1G &amp;nbsp;3.3M &amp;nbsp;3.1G &amp;nbsp; 1% /userdata
/dev/mmcblk1p7 &amp;nbsp; 63M &amp;nbsp; 13M &amp;nbsp; 48M &amp;nbsp;21% /oem
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; 200M &amp;nbsp;8.0K &amp;nbsp;200M &amp;nbsp; 1% /run/user/1000
tmpfs &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; 200M &amp;nbsp; &amp;nbsp; 0 &amp;nbsp;200M &amp;nbsp; 0% /run/user/0

网路Ping測試(Ping Network Testing)

Command：ifconfig 

root@linaro-alip:~# ifconfig
docker0: flags=4099&lt;UP,BROADCAST,MULTICAST&gt; &amp;nbsp;mtu 1500
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet 172.17.0.1 &amp;nbsp;netmask 255.255.0.0 &amp;nbsp;broadcast 172.17.255.255
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; ether 02:42:9d:3a:25:6f &amp;nbsp;txqueuelen 0 &amp;nbsp;(Ethernet)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX packets 0 &amp;nbsp;bytes 0 (0.0 B)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX errors 0 &amp;nbsp;dropped 0 &amp;nbsp;overruns 0 &amp;nbsp;frame 0
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX packets 0 &amp;nbsp;bytes 0 (0.0 B)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX errors 0 &amp;nbsp;dropped 0 overruns 0 &amp;nbsp;carrier 0 &amp;nbsp;collisions 0

eth0: flags=4163&lt;UP,BROADCAST,RUNNING,MULTICAST&gt; &amp;nbsp;mtu 1500
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet 192.168.127.100 &amp;nbsp;netmask 255.255.255.0 &amp;nbsp;broadcast 192.168.127.255
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet6 fe80::3269:bcb5:eaa7:b6b7 &amp;nbsp;prefixlen 64 &amp;nbsp;scopeid 0x20&lt;link&gt;
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; ether c4:00:ad:41:6d:fb &amp;nbsp;txqueuelen 1000 &amp;nbsp;(Ethernet)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX packets 175 &amp;nbsp;bytes 16715 (16.3 KiB)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX errors 0 &amp;nbsp;dropped 0 &amp;nbsp;overruns 0 &amp;nbsp;frame 0
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX packets 109 &amp;nbsp;bytes 7172 (7.0 KiB)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX errors 0 &amp;nbsp;dropped 0 overruns 0 &amp;nbsp;carrier 0 &amp;nbsp;collisions 0
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; device interrupt 44

lo: flags=73&lt;UP,LOOPBACK,RUNNING&gt; &amp;nbsp;mtu 65536
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet 127.0.0.1 &amp;nbsp;netmask 255.0.0.0
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; inet6&amp;nbsp;::1 &amp;nbsp;prefixlen 128 &amp;nbsp;scopeid 0x10&lt;host&gt;
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; loop &amp;nbsp;txqueuelen 1 &amp;nbsp;(Local Loopback)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX packets 980 &amp;nbsp;bytes 66000 (64.4 KiB)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; RX errors 0 &amp;nbsp;dropped 0 &amp;nbsp;overruns 0 &amp;nbsp;frame 0
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX packets 980 &amp;nbsp;bytes 66000 (64.4 KiB)
&amp;nbsp; &amp;nbsp; &amp;nbsp; &amp;nbsp; TX errors 0 &amp;nbsp;dropped 0 overruns 0 &amp;nbsp;carrier 0 &amp;nbsp;collisions 0

Command：Ping 192.168.127.100

root@linaro-alip:~# ping 192.168.127.100
PING &lt;span style=&quot;color:#FF0000;&quot;&gt;192.168.127.100&lt;/span&gt; (192.168.127.100) 56(84) bytes of data.
64 bytes from 192.168.127.100: icmp_seq=1 ttl=64 time=0.200 ms
64 bytes from 192.168.127.100: icmp_seq=2 ttl=64 time=0.161 ms
64 bytes from 192.168.127.100: icmp_seq=3 ttl=64 time=0.147 ms
^C
--- &lt;span style=&quot;color:#FF0000;&quot;&gt;192.168.127.100&lt;/span&gt; ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2ms
rtt min/avg/max/mdev = 0.147/0.169/0.200/0.024 ms

設置RTC (RTC Setting) 

root@linaro-alip:~# sudo su
root@linaro-alip:~# date
Tue Oct 26 08:16:04 UTC 2021
root@linaro-alip:~# date -s &quot;2022-9-1 13:00:00&quot;
Thu Sep &amp;nbsp;1 13:00:00 UTC 2022
root@linaro-alip:~# date
Thu Sep &amp;nbsp;1 13:00:10 UTC 2022
root@linaro-alip:~#hwclock -w
root@linaro-alip:~# hwclock
Thu Sep &amp;nbsp;1 13:01:07 2022 &amp;nbsp;0.000000 seconds


Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=EPC-R4680_user_guide&oldid=23973"