Difference between revisions of "RSB-3430 user guide"
Line 1: | Line 1: | ||
+ | <h2><b>資源特性(Features)</b></h2> | ||
− | + | <ul> | |
+ | <li>NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz</li> | ||
+ | <li>Onboard LPDDR4 4 GB / 6 GB, 4000MT/s memory</li> | ||
+ | <li>HDMI 1920x1080 at 60Hz, 1 Single or 1 Dual Channel 24 bit LVDS (or 1 4-Lane MIPI-DSI by BOM Option)</li> | ||
+ | <li>1 4-wire RS-232/422/485, 1 USB3.2 Gen1 By 1, 1 USB2.0, 1 Micro SD, 1 Mic. in / Line out</li> | ||
+ | <li>1 mini-PCIe for 3G/4G, 1 M.2 2230 Key E Slot</li> | ||
+ | <li>Supports Yocto Linux and Android</li> | ||
+ | <li>Support I/O Expansions boards by UIO40-Express</li> | ||
+ | </ul> | ||
− | + | <h2><b>訂購資訊(Ordering Information)</b></h2> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | <p><img _fck_mw_filename="RSB-3430 orderinfo.PNG" _fck_mw_origimgheight="157" _fck_mw_origimgwidth="1308" alt="RTENOTITLE" src="/wiki/images/8/83/RSB-3430_orderinfo.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p> |
− | + | <h2><b>规格(Specifications)</b></h2> | |
− | + | <h2><b>接口布局和尺寸(Layout and Sizes)</b></h2> | |
− | + | <h3><b>接口布局圖 Board Dimension Layout </b></h3> | |
− | === | + | <p><img _fck_mw_filename="RSB-3430 Board outline.PNG" _fck_mw_origimgheight="336" _fck_mw_origimgwidth="406" alt="RTENOTITLE" src="/wiki/images/1/1d/RSB-3430_Board_outline.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p> |
− | + | <p> </p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 IOoutline.PNG" _fck_mw_origimgheight="108" _fck_mw_origimgwidth="366" alt="RTENOTITLE" src="/wiki/images/0/03/RSB-3430_IOoutline.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 Board Drawing.PNG" _fck_mw_origimgheight="675" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b2/RSB-3430_Board_Drawing.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 Board Drawing 1.PNG" _fck_mw_origimgheight="155" _fck_mw_origimgwidth="380" alt="RTENOTITLE" src="/wiki/images/3/34/RSB-3430_Board_Drawing_1.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p> </p> | |
− | | + | <h2><b> '</b><i>Connector List'</i></h2> |
− | == | + | <p><img _fck_mw_filename="RSB-3430 connect list.PNG" _fck_mw_origimgheight="351" _fck_mw_origimgwidth="488" alt="RTENOTITLE" src="/wiki/images/c/c4/RSB-3430_connect_list.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p> |
− | + | <p> </p> | |
− | + | <h3><b>接口引脚定義 (Pin definitions)</b></h3> | |
− | === | + | <ul> |
+ | <li><a href="BLP1">BLP1 </a></li> | ||
+ | <li><a href="BLP2">BLP2</a></li> | ||
+ | <li><a href="VDD1">VDD1</a></li> | ||
+ | <li><a href="SW1">SW1</a></li> | ||
+ | <li><a href="BAT%20%28RTC%20Battery%20CONN.%29">BAT (RTC Battery CONN.)</a></li> | ||
+ | <li><a href="BL1%20%28LVDS%20Backlight%201%29">BL1 (LVDS Backlight 1)</a></li> | ||
+ | <li><a href="BL2%20%28LVDS%20Backlight%202%29">BL2 (LVDS Backlight 2)</a></li> | ||
+ | <li><a href="COM1%20%28COM%20%2B%20CAN%20Pin%20Header%29%3A%20%28default%20as%20debug%20console%29">COM1 (COM + CAN Pin Header): (default as debug console)</a></li> | ||
+ | <li><a href="CSI1%20%28MIPI-CSI%20Camera%20Input%201%29">CSI1 (MIPI-CSI Camera Input 1)</a></li> | ||
+ | <li><a href="CSI2%20%28MIPI-CSI%20Camera%20Input%202%29">CSI2 (MIPI-CSI Camera Input 2)</a></li> | ||
+ | <li><a href="DCIN%2F%20DCIN1%20%2812V%20DC%20Power%20Input%20by%20DC%20Jack%2F%20by%20Pin%20Header%29">DCIN/ DCIN1 (12V DC Power Input by DC Jack/ by Pin Header)</a></li> | ||
+ | <li><a href="HDMI%20%28HDMI%20CONN.%29">HDMI (HDMI CONN.)</a></li> | ||
+ | <li><a href="LAN1%20%28Ethernet%20eth0%29">LAN1 (Ethernet eth0)</a></li> | ||
+ | <li><a href="LAN2%20%28Ethernet%20eth1%29">LAN2 (Ethernet eth1)</a></li> | ||
+ | <li><a href="LOUT%20%28Line%20Out%20Pin%20Header%29">LOUT (Line Out Pin Header)</a></li> | ||
+ | <li><a href="LVDS%20%28LVDS%20CONN.%29">LVDS (LVDS CONN.)</a></li> | ||
+ | <li><a href="M2%20%28M.2%20Key%20E%20CONN.%29">M2 (M.2 Key E CONN.)</a></li> | ||
+ | <li><a href="MIC%20%28MIC%20In%20Pin%20Header%29">MIC (MIC In Pin Header)</a></li> | ||
+ | <li><a href="MPCIE%20%28Mini-PCIe%20CONN.%29">MPCIE (Mini-PCIe CONN.)</a></li> | ||
+ | <li><a href="RST%20%28Reset%20Button%29">RST (Reset Button)</a></li> | ||
+ | <li><a href="SD%20%28SD%20Slot%29">SD (SD Slot)</a></li> | ||
+ | <li><a href="SIM%20%28SIM%20Slot%29">SIM (SIM Slot)</a></li> | ||
+ | <li><a href="UIO1%20%28UIO40-Express%20Pin%20Header%201%29">UIO1 (UIO40-Express Pin Header 1)</a></li> | ||
+ | <li><a href="UIO2%20%28UIO40-Express%20Pin%20Header%202%29">UIO2 (UIO40-Express Pin Header 2)</a></li> | ||
+ | <li><a href="USB%201%20%28USB%203.2%20Gen%201%20on%20TOP%20%2B%20USB%202.0%20on%20BOT%29">USB 1 (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)</a></li> | ||
+ | <li><a href="LED">LED</a></li> | ||
+ | </ul> | ||
+ | <h3><b> 机械尺寸 (</b>Mechanical Characteristics)</h3> | ||
+ | <p><img _fck_mw_filename="RSB-3720 board Dimensions 2021-10-21 145827.jpg" _fck_mw_origimgheight="497" _fck_mw_origimgwidth="577" alt="RTENOTITLE" src="/wiki/images/a/af/RSB-3720_board_Dimensions_2021-10-21_145827.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | ||
− | + | <h2><b>快速入门 (Quick Start)</b></h2> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | <h3><b>系统下载 (OS Download)</b></h3> | |
− | + | <p>'<i>Linux系统 (Linux OS)'</i><b> </b></p> | |
− | == | + | <table border="1" cellpadding="0" cellspacing="0"> |
+ | <tbody> | ||
+ | <tr> | ||
+ | <td> | ||
+ | <p><b>Git BSP Tag Version</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>Product</b></p> | ||
+ | </td> | ||
+ | <td> <b>BSP/Image</b></td> | ||
+ | <td> | ||
+ | <p><b>Date</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>Alpha Release</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>Beta Release</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>MP Release</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>Release Note</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>Comment</b></p> | ||
+ | </td> | ||
+ | <td> | ||
+ | <p><b>Release Owner</b></p> | ||
+ | </td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="text-align: center;">imx6LBV90146</td> | ||
+ | <td>RSB-3430A1</td> | ||
+ | <td> 3430A1AIM20LIV90146_DualQuad_2021-08-08.img.gz</td> | ||
+ | <td>2021-08-08</td> | ||
+ | <td style="text-align: center;">V</td> | ||
+ | <td> </td> | ||
+ | <td> </td> | ||
+ | <td> </td> | ||
+ | <td> </td> | ||
+ | <td> </td> | ||
+ | </tr> | ||
+ | </tbody> | ||
+ | </table> | ||
− | + | <p> </p> | |
− | + | <ul> | |
+ | <li><b><a alt="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow" href="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow" title="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow">Baidu link for imx6 Yocto 2.5 BSP and Image</a> Password:ra18</b></li> | ||
+ | <li><b><a alt="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0" href="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0" title="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0">Dropbox link for imx6 Yocto 2.5 BSP and Image</a></b></li> | ||
+ | <li><a alt="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz" href="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz" title="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz"><b>Downloads 2.5</b></a></li> | ||
+ | </ul> | ||
− | + | <p> </p> | |
− | |||
− | |||
− | |||
− | + | <h2><b> Linux 燒錄方法 (Linux Flash eMMC Method)</b></h2> | |
− | |||
− | + | <p><b>1. 確認SD 在Ubuntu 電腦中的代號</b></p> | |
− | |||
− | |||
− | + | <p><b><img _fck_mw_filename="RSB-3430 Check SDCard 2021-10-26 134232.jpg" _fck_mw_origimgheight="22" _fck_mw_origimgwidth="677" alt="RTENOTITLE" src="/wiki/images/2/21/RSB-3430_Check_SDCard_2021-10-26_134232.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | |||
− | + | <p><b><img _fck_mw_filename="RSB-3430 SDCardInfo 2021-10-26 134323.jpg" _fck_mw_origimgheight="191" _fck_mw_origimgwidth="583" alt="RTENOTITLE" src="/wiki/images/5/55/RSB-3430_SDCardInfo_2021-10-26_134323.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | |||
− | + | <p><b>2. 先將鏡像燒錄到SD Card 中( Create a bootable SD card ) </b></p> | |
− | |||
− | + | <p>'<i><img _fck_mw_filename="RSB-3430 dd SDcard 2021-10-26 134535.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="1267" alt="RTENOTITLE" src="/wiki/images/1/15/RSB-3430_dd_SDcard_2021-10-26_134535.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></i></p> | |
− | |||
− | + | <p> </p> | |
− | |||
− | + | <p> </p> | |
− | |||
− | + | <p><b><img _fck_mw_filename="RSB-3430 SDCard info 2 2021-10-26 134939.jpg" _fck_mw_origimgheight="87" _fck_mw_origimgwidth="1243" alt="RTENOTITLE" src="/wiki/images/5/54/RSB-3430_SDCard_info_2_2021-10-26_134939.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | + | <p><b>3.設定終端機(Set Debug Terminal) </b></p> |
− | + | <p>Debug 串口調試 (Debug port Setting)</p> | |
− | |||
− | |||
− | | + | <p>以 Tera Term 为例介绍如何使用串口调试功能</p> |
− | + | <pre> | |
− | + | Baud Rate波特率:115200 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <pre> | ||
Data 数据位:8 | Data 数据位:8 | ||
Parity 奇偶校验:无 | Parity 奇偶校验:无 | ||
− | Stop 停止位:1 | + | &nbsp; Stop 停止位:1 |
Flow Control流控:无</pre> | Flow Control流控:无</pre> | ||
− | + | <dl> | |
+ | <dd> </dd> | ||
+ | </dl> | ||
− | Tera Term Tool | + | <p>Tera Term Tool </p> |
− | + | <p><img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | Check the Sriel port in Device Manager (查看PC端的串口号): | + | <p>Check the Sriel port in Device Manager (查看PC端的串口号):</p> |
− | if you can not identify the Serial device , please check your serial driver. | + | <p>if you can not identify the Serial device , please check your serial driver. </p> |
− | + | <p><img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>4. 將SD card 插入機器 </b></p> | |
− | | + | <p> <img _fck_mw_filename="RSB-3430 plugSD Card3 24240133.jpg" _fck_mw_origimgheight="739" _fck_mw_origimgwidth="554" alt="RTENOTITLE" src="/wiki/images/9/9a/RSB-3430_plugSD_Card3_24240133.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> |
− | + | <p><b>5. 檢查撥碼開關 ( 1 ON , 2 OFF) </b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3430 Switch 24240134.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/3/32/RSB-3430_Switch_24240134.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | + | <p><b>6. 接上Debug Cable </b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 Debug port 24240136.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/4/46/RSB-3430_Debug_port_24240136.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>7. 打開電源 </b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 turnonpower 24240137.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/1/19/RSB-3430_turnonpower_24240137.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>8. 由終端機進入系統 </b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3430 Debug terminal 2021-10-26 141124.jpg" _fck_mw_origimgheight="461" _fck_mw_origimgwidth="800" alt="RTENOTITLE" src="/wiki/images/6/60/RSB-3430_Debug_terminal_2021-10-26_141124.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | + | <p><b>9. 燒錄鏡像到 eMMC flash </b></p> | |
− | + | <p><b>將3430A1AIM20LIV90146_DualQuad_flash_tool.tgz 複製到U盤中,插入機器的USB Port </b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3430 Cpfile toUsb 2021-10-26 141813.jpg" _fck_mw_origimgheight="158" _fck_mw_origimgwidth="503" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_Cpfile_toUsb_2021-10-26_141813.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | + | <p><b>在系統中 ,確認USB中燒錄資料 </b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3430 USB IN Device 2021-10-26 142038.jpg" _fck_mw_origimgheight="96" _fck_mw_origimgwidth="727" alt="RTENOTITLE" src="/wiki/images/0/0c/RSB-3430_USB_IN_Device_2021-10-26_142038.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 CP file into root 2021-10-26 143316.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="806" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_CP_file_into_root_2021-10-26_143316.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>在根目錄下 ,解壓縮 </b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 Unzip file in root 2021-10-26 143506.jpg" _fck_mw_origimgheight="231" _fck_mw_origimgwidth="810" alt="RTENOTITLE" src="/wiki/images/c/c5/RSB-3430_Unzip_file_in_root_2021-10-26_143506.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>在mk_Inand 資料夾中執行 ./mksd-linux.sh </b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 check file 2021-10-26 143952.jpg" _fck_mw_origimgheight="140" _fck_mw_origimgwidth="807" alt="RTENOTITLE" src="/wiki/images/8/87/RSB-3430_check_file_2021-10-26_143952.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 mksd linuxsh 2021-10-26 143855.jpg" _fck_mw_origimgheight="241" _fck_mw_origimgwidth="815" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_mksd_linuxsh_2021-10-26_143855.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 flash image done 2021-10-26 144801.jpg" _fck_mw_origimgheight="290" _fck_mw_origimgwidth="801" alt="RTENOTITLE" src="/wiki/images/2/29/RSB-3430_flash_image_done_2021-10-26_144801.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>10. 移除SD 卡,從eMMC 開機. </b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 boot from eMMC 2021-10-27 091349.jpg" _fck_mw_origimgheight="477" _fck_mw_origimgwidth="1018" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_boot_from_eMMC_2021-10-27_091349.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <h2><b> </b></h2> | |
− | + | <h2><b>Linux系统的基本使用(Linux System Basic Operating Method)</b></h2> | |
− | + | <h3><b>載入預設值由uboot 設定(Load Default Setting in Uboot )</b></h3> | |
− | + | <p><b>1. 開機時 在五秒內按下空白鍵 ,進入Uboot </b></p> | |
− | + | <p><b>2. Command : </b></p> | |
− | + | <p><b> env default -a </b></p> | |
− | + | <p><b> saveenv </b></p> | |
− | + | <p><b> reset </b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3430 Load default 2021-10-27 091752.jpg" _fck_mw_origimgheight="487" _fck_mw_origimgwidth="1025" alt="RTENOTITLE" src="/wiki/images/2/22/RSB-3430_Load_default_2021-10-27_091752.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | + | <h3><b>顯示設定 (Display Setting ) </b></h3> | |
− | + | <p><b> 預設值為: HDMI 輸出</b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3420 uboot default 2021-10-27 135059.jpg" _fck_mw_origimgheight="625" _fck_mw_origimgwidth="1332" alt="RTENOTITLE" src="/wiki/images/2/2a/RSB-3420_uboot_default_2021-10-27_135059.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | | + | <p> </p> |
− | = | + | <h3><img _fck_mw_filename="RSB-3430 uboot default 2 2021-10-27 135218.jpg" _fck_mw_origimgheight="605" _fck_mw_origimgwidth="1328" alt="RTENOTITLE" src="/wiki/images/a/a5/RSB-3430_uboot_default_2_2021-10-27_135218.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></h3> |
− | + | <h3><b>乙太網路使用方法(Ethernent Testing Method)</b></h3> | |
− | + | <p><b>Command : ifconfig </b></p> | |
− | + | <p><img _fck_mw_filename="RSB-3430 ifconfig info 2021-10-27 092342.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="517" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3430_ifconfig_info_2021-10-27_092342.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><b>Command: Ping 8.8.8.8 </b></p> | |
− | + | <p><b><img _fck_mw_filename="RSB-3430 ping 8888 2021-10-27 092542.jpg" _fck_mw_origimgheight="287" _fck_mw_origimgwidth="671" alt="RTENOTITLE" src="/wiki/images/d/d8/RSB-3430_ping_8888_2021-10-27_092542.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p> | |
− | | + | <p> </p> |
− | + | <h3><b>WiFi & BT 使用方法(WIFI & Bluetooth Testing Method)</b></h3> | |
− | <pre>M.2 module (EWM-W162M201E) - WIFI / BT Function | + | |
− | WIFI | + | <pre> |
+ | M.2 module (EWM-W162M201E) - WIFI / BT Function&nbsp; | ||
+ | WIFI&nbsp; | ||
$ ifconfig mlan0 up | $ ifconfig mlan0 up | ||
− | $ wpa_passphrase ${SSID} ${WPA_KEY} | + | $ wpa_passphrase ${SSID} ${WPA_KEY} > /tmp/wpa.conf |
$ wpa_supplicant -BDwext -imlan0 -c/tmp/wpa.conf | $ wpa_supplicant -BDwext -imlan0 -c/tmp/wpa.conf | ||
$ udhcpc -b -i mlan0 | $ udhcpc -b -i mlan0 | ||
− | BlueTooth | + | BlueTooth&nbsp; |
− | $ /usr/libexec/bluetooth/bluetoothd -C & | + | $ /usr/libexec/bluetooth/bluetoothd -C & |
$ hciconfig hci0 up | $ hciconfig hci0 up | ||
$ bluetoothctl | $ bluetoothctl | ||
Line 278: | Line 291: | ||
$ pairable on | $ pairable on | ||
$ scan on | $ scan on | ||
− | [NEW] FC:18:3C:8D:75:F4 Device ID | + | [NEW] FC:18:3C:8D:75:F4 Device ID&nbsp; |
$ scan off | $ scan off | ||
$ pair FC:18:3C:8D:75:F4 | $ pair FC:18:3C:8D:75:F4 | ||
Line 284: | Line 297: | ||
</pre> | </pre> | ||
− | | + | <p> </p> |
+ | |||
+ | <h3><b>3G使用方法(3G Testing Method)</b></h3> | ||
− | + | <pre> | |
− | <pre>Command: | + | Command: |
− | 3G (Telit HE910D) | + | 3G (Telit HE910D)&nbsp; |
− | pppd connect | + | pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' user username password password /dev/ttyACM3 460800 nodetach crtscts debug usepeerdns defaultroute &&nbsp; |
</pre> | </pre> | ||
− | + | <h3><b>USB 測試方式(USB Test metod )</b></h3> | |
+ | |||
+ | <p>USB </p> | ||
+ | |||
+ | <p>Insert a USB disk</p> | ||
+ | |||
+ | <p>usb 1-1.2: new high-speed USB device number 4 using ci_hdrc<br /> | ||
+ | usb-storage 1-1.2:1.0: USB Mass Storage device detected<br /> | ||
+ | scsi2 : usb-storage 1-1.2:1.0<br /> | ||
+ | scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS<br /> | ||
+ | sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)<br /> | ||
+ | sd 2:0:0:0: [sda] Write Protect is off<br /> | ||
+ | sd 2:0:0:0: [sda] No Caching mode page found<br /> | ||
+ | sd 2:0:0:0: [sda] Assuming drive cache: write through<br /> | ||
+ | sd 2:0:0:0: [sda] No Caching mode page found<br /> | ||
+ | sd 2:0:0:0: [sda] Assuming drive cache: write through<br /> | ||
+ | sda: sda1<br /> | ||
+ | sd 2:0:0:0: [sda] No Caching mode page found<br /> | ||
+ | sd 2:0:0:0: [sda] Assuming drive cache: write through<br /> | ||
+ | sd 2:0:0:0: [sda] Attached SCSI removable disk</p> | ||
− | + | <h3><b>串口使用方法(Serial Port Operating Method)</b></h3> | |
− | + | <p><b>RS-232 Test </b></p> | |
− | + | <pre> | |
+ | Command&nbsp;: stty -F /dev/ttymxc1 115200 | ||
+ | echo Serial Port Test > /dev/ttymxc1</pre> | ||
− | + | <p><br /> | |
+ | <b>RS-422 setting</b></p> | ||
− | + | <pre> | |
− | + | echo 134 > /sys/class/gpio/export | |
− | + | echo 135 > /sys/class/gpio/export | |
+ | echo out > /sys/class/gpio/gpio1/direction | ||
+ | echo out > /sys/class/gpio/gpio2/direction | ||
+ | echo 1 > /sys/class/gpio/gpio1/value | ||
+ | echo 1 > /sys/class/gpio/gpio2/value </pre> | ||
− | < | + | <p><b>RS-422 test </b></p> |
− | < | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | <pre> | |
− | <pre>Command : stty -F /dev/ttymxc1 115200 | + | Command&nbsp;: stty -F /dev/ttymxc1 115200 |
− | echo Serial Port Test | + | echo Serial Port Test > /dev/ttymxc1</pre> |
− | + | <p><b>RS-485 setting </b></p> | |
− | < | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | < | + | <pre> |
− | + | echo 134 > /sys/class/gpio/export | |
− | + | echo 135 > /sys/class/gpio/export | |
+ | echo out > /sys/class/gpio/gpio1/direction | ||
+ | echo out > /sys/class/gpio/gpio2/direction | ||
+ | echo 0 > /sys/class/gpio/gpio1/value | ||
+ | echo 1 > /sys/class/gpio/gpio2/value </pre> | ||
− | + | <p><br /> | |
+ | <b>RS-485 test </b></p> | ||
− | + | <pre> | |
+ | Command&nbsp;: stty -F /dev/ttymxc1 115200 | ||
+ | echo Serial Port Test > /dev/ttymxc1</pre> | ||
− | + | <h3><b>遠程訪問及文件傳輸(Remote Access and File Transimmion)</b></h3> | |
− | < | ||
− | + | <p><b> 查看主板IP位址 ( Chech IP Address ):</b></p> | |
− | + | <pre> | |
+ | Command&nbsp;: ifconfig</pre> | ||
− | + | <p><img _fck_mw_filename="Eth0ssh 2021-09-10 143210.jpg" _fck_mw_origimgheight="395" _fck_mw_origimgwidth="1002" alt="RTENOTITLE" src="/wiki/images/5/52/Eth0ssh_2021-09-10_143210.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <h4>Windows下SSH访问及文件传输</h4> | |
− | |||
− | | + | <p>SSH Remote Log into Device </p> |
− | + | <ul> | |
+ | <li>SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)</li> | ||
+ | <li>需要设置远程设备的IP、通讯端口(默认22)、通讯方式,登录后验证用户名密码</li> | ||
+ | </ul> | ||
− | + | <p> </p> | |
− | + | <p><img _fck_mw_filename="SSHsettingdetail.png" _fck_mw_origimgheight="600" _fck_mw_origimgwidth="748" alt="RTENOTITLE" src="/wiki/images/3/35/SSHsettingdetail.png" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p><img _fck_mw_filename="SSHSetting2021-09-10 143631.jpg" _fck_mw_origimgheight="437" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b6/SSHSetting2021-09-10_143631.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> | |
− | + | <p> </p> | |
− | == | + | <p><img _fck_mw_filename="Sshsetting12021-09-10 143743n.jpg" _fck_mw_origimgheight="363" _fck_mw_origimgwidth="576" alt="RTENOTITLE" src="/wiki/images/b/b0/Sshsetting12021-09-10_143743n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p> |
− | === | + | <p><img _fck_mw_filename="RSB-3430 ssh connection.png" _fck_mw_origimgheight="449" _fck_mw_origimgwidth="821" alt="RTENOTITLE" src="/wiki/images/c/cf/RSB-3430_ssh_connection.png" style="vertical-align:middle;" title="RTENOTITLE" /></p> |
− | |||
− | + | <h2><b>通用方法(General Method)</b></h2> | |
− | + | <h3><b>查看CPU温度(Check CPU Temperature)</b></h3> | |
− | <pre> | + | |
− | + | <pre> | |
+ | root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600 | ||
+ | |||
+ | # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°</pre> | ||
+ | |||
+ | <h3><b>查看CPU频率(Check CPU Frequency)</b></h3> | ||
+ | |||
+ | <pre> | ||
+ | cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq | ||
+ | >> 900000 | ||
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq | cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq | ||
− | + | >> 1200000</pre> | |
− | + | <h3><b>查看内存容量(Check Memory Capacity)</b></h3> | |
− | <pre>root@imx8qxprom5620a1:/# busybox free -m | + | |
+ | <pre> | ||
+ | root@imx8qxprom5620a1:/# busybox free -m | ||
total used free shared buffers cached | total used free shared buffers cached | ||
Mem: 1794920 516080 1278840 17252 9852 80292 | Mem: 1794920 516080 1278840 17252 9852 80292 | ||
Line 379: | Line 427: | ||
</pre> | </pre> | ||
− | + | <h3><b>查看存储容量(Check Storage Capacity)</b></h3> | |
− | <pre>root@imx8qxprom5620a1:/# busybox df -h | + | |
+ | <pre> | ||
+ | root@imx8qxprom5620a1:/# busybox df -h | ||
Filesystem Size Used Available Use% Mounted on | Filesystem Size Used Available Use% Mounted on | ||
/dev/root 13.4G 1.7G 11.1G 13% / | /dev/root 13.4G 1.7G 11.1G 13% / | ||
Line 395: | Line 445: | ||
root@imx8qxprom5620a1:/#</pre> | root@imx8qxprom5620a1:/#</pre> | ||
− | + | <h3><b> 網路Ping測試(Ping Network Testing)</b></h3> | |
− | <pre> | + | |
+ | <pre> | ||
+ | ping 8.8.8.8 | ||
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. | PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. | ||
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms | 64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms | ||
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre> | 64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre> | ||
− | + | <h3><b>設置RTC (RTC Setting) </b></h3> | |
− | <pre>RTC : | + | |
+ | <pre> | ||
+ | RTC&nbsp;:&nbsp; | ||
$ date MMDDhhmm[[CC]YY][.ss] | $ date MMDDhhmm[[CC]YY][.ss] | ||
$ hwclock -w | $ hwclock -w | ||
$ ntpdate tw.pool.ntp.org</pre> | $ ntpdate tw.pool.ntp.org</pre> | ||
− | + | <h3><b>Audio 測試</b></h3> | |
− | <pre>Line out : | + | |
+ | <pre> | ||
+ | Line out&nbsp;: | ||
$ aplay -D plughw:0,0 Advantech.wav | $ aplay -D plughw:0,0 Advantech.wav | ||
− | MIC in : | + | MIC in&nbsp;: |
$ arecord -t wav -c 1 -r 44100 -d 10 test.wav | $ arecord -t wav -c 1 -r 44100 -d 10 test.wav | ||
</pre> | </pre> | ||
− | + | <h3><b> Display (LVDS:800x480)設置 </b></h3> | |
− | <pre>U-boot command : | + | |
+ | <pre> | ||
+ | U-boot command&nbsp;: | ||
setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} video=mxcfb0:dev=ldb,800x480M@60,if=RGB24 | setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} video=mxcfb0:dev=ldb,800x480M@60,if=RGB24 | ||
</pre> | </pre> | ||
− | + | <h2><b>Linux BSP編譯方法(Linux BSP Compile Method)</b></h2> | |
− | === | + | <h3><a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide"><b>Yocto 2.5</b></a></h3> |
− | === | + | <h3><a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide"><b>Yocto 2.1</b></a></h3> |
− | + | <table border="0" cellpadding="10" cellspacing="0" style="width:100%;"> | |
− | + | <tbody> | |
− | + | <tr> | |
− | + | <td><span _fck_mw_customtag="true" _fck_mw_tagattributes="height,key,level,path,width" _fck_mw_tagname="iframe" _fck_mw_tagtype="t" class="fck_mw_special" height="230" key="advonline" level="campaign" path="en/aim-linux_community/" width="100%">_</span></td> | |
+ | </tr> | ||
+ | </tbody> | ||
+ | </table> |
Revision as of 03:37, 21 February 2023
Contents
- 1 資源特性(Features)
- 2 訂購資訊(Ordering Information)
- 3 规格(Specifications)
- 4 接口布局和尺寸(Layout and Sizes)
- 5 'Connector List'
- 6 快速入门 (Quick Start)
- 7 Linux 燒錄方法 (Linux Flash eMMC Method)
- 8
- 9 Linux系统的基本使用(Linux System Basic Operating Method)
- 9.1 載入預設值由uboot 設定(Load Default Setting in Uboot )
- 9.2 顯示設定 (Display Setting )
- 9.3 <img _fck_mw_filename="RSB-3430 uboot default 2 2021-10-27 135218.jpg" _fck_mw_origimgheight="605" _fck_mw_origimgwidth="1328" alt="RTENOTITLE" src="/wiki/images/a/a5/RSB-3430_uboot_default_2_2021-10-27_135218.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
- 9.4 乙太網路使用方法(Ethernent Testing Method)
- 9.5 WiFi & BT 使用方法(WIFI & Bluetooth Testing Method)
- 9.6 3G使用方法(3G Testing Method)
- 9.7 USB 測試方式(USB Test metod )
- 9.8 串口使用方法(Serial Port Operating Method)
- 9.9 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 10 通用方法(General Method)
- 11 Linux BSP編譯方法(Linux BSP Compile Method)
- 11.1 <a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide">Yocto 2.5</a>
- 11.2 <a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide">Yocto 2.1</a>
資源特性(Features)
- NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz
- Onboard LPDDR4 4 GB / 6 GB, 4000MT/s memory
- HDMI 1920x1080 at 60Hz, 1 Single or 1 Dual Channel 24 bit LVDS (or 1 4-Lane MIPI-DSI by BOM Option)
- 1 4-wire RS-232/422/485, 1 USB3.2 Gen1 By 1, 1 USB2.0, 1 Micro SD, 1 Mic. in / Line out
- 1 mini-PCIe for 3G/4G, 1 M.2 2230 Key E Slot
- Supports Yocto Linux and Android
- Support I/O Expansions boards by UIO40-Express
訂購資訊(Ordering Information)
<img _fck_mw_filename="RSB-3430 orderinfo.PNG" _fck_mw_origimgheight="157" _fck_mw_origimgwidth="1308" alt="RTENOTITLE" src="/wiki/images/8/83/RSB-3430_orderinfo.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
规格(Specifications)
接口布局和尺寸(Layout and Sizes)
接口布局圖 Board Dimension Layout
<img _fck_mw_filename="RSB-3430 Board outline.PNG" _fck_mw_origimgheight="336" _fck_mw_origimgwidth="406" alt="RTENOTITLE" src="/wiki/images/1/1d/RSB-3430_Board_outline.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 IOoutline.PNG" _fck_mw_origimgheight="108" _fck_mw_origimgwidth="366" alt="RTENOTITLE" src="/wiki/images/0/03/RSB-3430_IOoutline.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 Board Drawing.PNG" _fck_mw_origimgheight="675" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b2/RSB-3430_Board_Drawing.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 Board Drawing 1.PNG" _fck_mw_origimgheight="155" _fck_mw_origimgwidth="380" alt="RTENOTITLE" src="/wiki/images/3/34/RSB-3430_Board_Drawing_1.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
'Connector List'
<img _fck_mw_filename="RSB-3430 connect list.PNG" _fck_mw_origimgheight="351" _fck_mw_origimgwidth="488" alt="RTENOTITLE" src="/wiki/images/c/c4/RSB-3430_connect_list.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
接口引脚定義 (Pin definitions)
- <a href="BLP1">BLP1 </a>
- <a href="BLP2">BLP2</a>
- <a href="VDD1">VDD1</a>
- <a href="SW1">SW1</a>
- <a href="BAT%20%28RTC%20Battery%20CONN.%29">BAT (RTC Battery CONN.)</a>
- <a href="BL1%20%28LVDS%20Backlight%201%29">BL1 (LVDS Backlight 1)</a>
- <a href="BL2%20%28LVDS%20Backlight%202%29">BL2 (LVDS Backlight 2)</a>
- <a href="COM1%20%28COM%20%2B%20CAN%20Pin%20Header%29%3A%20%28default%20as%20debug%20console%29">COM1 (COM + CAN Pin Header): (default as debug console)</a>
- <a href="CSI1%20%28MIPI-CSI%20Camera%20Input%201%29">CSI1 (MIPI-CSI Camera Input 1)</a>
- <a href="CSI2%20%28MIPI-CSI%20Camera%20Input%202%29">CSI2 (MIPI-CSI Camera Input 2)</a>
- <a href="DCIN%2F%20DCIN1%20%2812V%20DC%20Power%20Input%20by%20DC%20Jack%2F%20by%20Pin%20Header%29">DCIN/ DCIN1 (12V DC Power Input by DC Jack/ by Pin Header)</a>
- <a href="HDMI%20%28HDMI%20CONN.%29">HDMI (HDMI CONN.)</a>
- <a href="LAN1%20%28Ethernet%20eth0%29">LAN1 (Ethernet eth0)</a>
- <a href="LAN2%20%28Ethernet%20eth1%29">LAN2 (Ethernet eth1)</a>
- <a href="LOUT%20%28Line%20Out%20Pin%20Header%29">LOUT (Line Out Pin Header)</a>
- <a href="LVDS%20%28LVDS%20CONN.%29">LVDS (LVDS CONN.)</a>
- <a href="M2%20%28M.2%20Key%20E%20CONN.%29">M2 (M.2 Key E CONN.)</a>
- <a href="MIC%20%28MIC%20In%20Pin%20Header%29">MIC (MIC In Pin Header)</a>
- <a href="MPCIE%20%28Mini-PCIe%20CONN.%29">MPCIE (Mini-PCIe CONN.)</a>
- <a href="RST%20%28Reset%20Button%29">RST (Reset Button)</a>
- <a href="SD%20%28SD%20Slot%29">SD (SD Slot)</a>
- <a href="SIM%20%28SIM%20Slot%29">SIM (SIM Slot)</a>
- <a href="UIO1%20%28UIO40-Express%20Pin%20Header%201%29">UIO1 (UIO40-Express Pin Header 1)</a>
- <a href="UIO2%20%28UIO40-Express%20Pin%20Header%202%29">UIO2 (UIO40-Express Pin Header 2)</a>
- <a href="USB%201%20%28USB%203.2%20Gen%201%20on%20TOP%20%2B%20USB%202.0%20on%20BOT%29">USB 1 (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)</a>
- <a href="LED">LED</a>
机械尺寸 (Mechanical Characteristics)
<img _fck_mw_filename="RSB-3720 board Dimensions 2021-10-21 145827.jpg" _fck_mw_origimgheight="497" _fck_mw_origimgwidth="577" alt="RTENOTITLE" src="/wiki/images/a/af/RSB-3720_board_Dimensions_2021-10-21_145827.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
快速入门 (Quick Start)
系统下载 (OS Download)
'Linux系统 (Linux OS)'
Git BSP Tag Version |
Product |
BSP/Image |
Date |
Alpha Release |
Beta Release |
MP Release |
Release Note |
Comment |
Release Owner |
imx6LBV90146 | RSB-3430A1 | 3430A1AIM20LIV90146_DualQuad_2021-08-08.img.gz | 2021-08-08 | V |
- <a alt="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow" href="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow" title="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow">Baidu link for imx6 Yocto 2.5 BSP and Image</a> Password:ra18
- <a alt="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0" href="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0" title="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0">Dropbox link for imx6 Yocto 2.5 BSP and Image</a>
- <a alt="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz" href="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz" title="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz">Downloads 2.5</a>
Linux 燒錄方法 (Linux Flash eMMC Method)
1. 確認SD 在Ubuntu 電腦中的代號
<img _fck_mw_filename="RSB-3430 Check SDCard 2021-10-26 134232.jpg" _fck_mw_origimgheight="22" _fck_mw_origimgwidth="677" alt="RTENOTITLE" src="/wiki/images/2/21/RSB-3430_Check_SDCard_2021-10-26_134232.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 SDCardInfo 2021-10-26 134323.jpg" _fck_mw_origimgheight="191" _fck_mw_origimgwidth="583" alt="RTENOTITLE" src="/wiki/images/5/55/RSB-3430_SDCardInfo_2021-10-26_134323.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
2. 先將鏡像燒錄到SD Card 中( Create a bootable SD card )
'<img _fck_mw_filename="RSB-3430 dd SDcard 2021-10-26 134535.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="1267" alt="RTENOTITLE" src="/wiki/images/1/15/RSB-3430_dd_SDcard_2021-10-26_134535.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 SDCard info 2 2021-10-26 134939.jpg" _fck_mw_origimgheight="87" _fck_mw_origimgwidth="1243" alt="RTENOTITLE" src="/wiki/images/5/54/RSB-3430_SDCard_info_2_2021-10-26_134939.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
3.設定終端機(Set Debug Terminal)
Debug 串口調試 (Debug port Setting)
以 Tera Term 为例介绍如何使用串口调试功能
Baud Rate波特率:115200 Data 数据位:8 Parity 奇偶校验:无 Stop 停止位:1 Flow Control流控:无
Tera Term Tool
<img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
Check the Sriel port in Device Manager (查看PC端的串口号):
if you can not identify the Serial device , please check your serial driver.
<img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
4. 將SD card 插入機器
<img _fck_mw_filename="RSB-3430 plugSD Card3 24240133.jpg" _fck_mw_origimgheight="739" _fck_mw_origimgwidth="554" alt="RTENOTITLE" src="/wiki/images/9/9a/RSB-3430_plugSD_Card3_24240133.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
5. 檢查撥碼開關 ( 1 ON , 2 OFF)
<img _fck_mw_filename="RSB-3430 Switch 24240134.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/3/32/RSB-3430_Switch_24240134.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
6. 接上Debug Cable
<img _fck_mw_filename="RSB-3430 Debug port 24240136.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/4/46/RSB-3430_Debug_port_24240136.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
7. 打開電源
<img _fck_mw_filename="RSB-3430 turnonpower 24240137.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/1/19/RSB-3430_turnonpower_24240137.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
8. 由終端機進入系統
<img _fck_mw_filename="RSB-3430 Debug terminal 2021-10-26 141124.jpg" _fck_mw_origimgheight="461" _fck_mw_origimgwidth="800" alt="RTENOTITLE" src="/wiki/images/6/60/RSB-3430_Debug_terminal_2021-10-26_141124.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
9. 燒錄鏡像到 eMMC flash
將3430A1AIM20LIV90146_DualQuad_flash_tool.tgz 複製到U盤中,插入機器的USB Port
<img _fck_mw_filename="RSB-3430 Cpfile toUsb 2021-10-26 141813.jpg" _fck_mw_origimgheight="158" _fck_mw_origimgwidth="503" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_Cpfile_toUsb_2021-10-26_141813.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
在系統中 ,確認USB中燒錄資料
<img _fck_mw_filename="RSB-3430 USB IN Device 2021-10-26 142038.jpg" _fck_mw_origimgheight="96" _fck_mw_origimgwidth="727" alt="RTENOTITLE" src="/wiki/images/0/0c/RSB-3430_USB_IN_Device_2021-10-26_142038.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 CP file into root 2021-10-26 143316.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="806" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_CP_file_into_root_2021-10-26_143316.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
在根目錄下 ,解壓縮
<img _fck_mw_filename="RSB-3430 Unzip file in root 2021-10-26 143506.jpg" _fck_mw_origimgheight="231" _fck_mw_origimgwidth="810" alt="RTENOTITLE" src="/wiki/images/c/c5/RSB-3430_Unzip_file_in_root_2021-10-26_143506.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
在mk_Inand 資料夾中執行 ./mksd-linux.sh
<img _fck_mw_filename="RSB-3430 check file 2021-10-26 143952.jpg" _fck_mw_origimgheight="140" _fck_mw_origimgwidth="807" alt="RTENOTITLE" src="/wiki/images/8/87/RSB-3430_check_file_2021-10-26_143952.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 mksd linuxsh 2021-10-26 143855.jpg" _fck_mw_origimgheight="241" _fck_mw_origimgwidth="815" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_mksd_linuxsh_2021-10-26_143855.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 flash image done 2021-10-26 144801.jpg" _fck_mw_origimgheight="290" _fck_mw_origimgwidth="801" alt="RTENOTITLE" src="/wiki/images/2/29/RSB-3430_flash_image_done_2021-10-26_144801.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
10. 移除SD 卡,從eMMC 開機.
<img _fck_mw_filename="RSB-3430 boot from eMMC 2021-10-27 091349.jpg" _fck_mw_origimgheight="477" _fck_mw_origimgwidth="1018" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_boot_from_eMMC_2021-10-27_091349.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
Linux系统的基本使用(Linux System Basic Operating Method)
載入預設值由uboot 設定(Load Default Setting in Uboot )
1. 開機時 在五秒內按下空白鍵 ,進入Uboot
2. Command :
env default -a
saveenv
reset
<img _fck_mw_filename="RSB-3430 Load default 2021-10-27 091752.jpg" _fck_mw_origimgheight="487" _fck_mw_origimgwidth="1025" alt="RTENOTITLE" src="/wiki/images/2/22/RSB-3430_Load_default_2021-10-27_091752.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
顯示設定 (Display Setting )
預設值為: HDMI 輸出
<img _fck_mw_filename="RSB-3420 uboot default 2021-10-27 135059.jpg" _fck_mw_origimgheight="625" _fck_mw_origimgwidth="1332" alt="RTENOTITLE" src="/wiki/images/2/2a/RSB-3420_uboot_default_2021-10-27_135059.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 uboot default 2 2021-10-27 135218.jpg" _fck_mw_origimgheight="605" _fck_mw_origimgwidth="1328" alt="RTENOTITLE" src="/wiki/images/a/a5/RSB-3430_uboot_default_2_2021-10-27_135218.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
<img _fck_mw_filename="RSB-3430 ifconfig info 2021-10-27 092342.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="517" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3430_ifconfig_info_2021-10-27_092342.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
Command: Ping 8.8.8.8
<img _fck_mw_filename="RSB-3430 ping 8888 2021-10-27 092542.jpg" _fck_mw_origimgheight="287" _fck_mw_origimgwidth="671" alt="RTENOTITLE" src="/wiki/images/d/d8/RSB-3430_ping_8888_2021-10-27_092542.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
WiFi & BT 使用方法(WIFI & Bluetooth Testing Method)
M.2 module (EWM-W162M201E) - WIFI / BT Function WIFI $ ifconfig mlan0 up $ wpa_passphrase ${SSID} ${WPA_KEY} > /tmp/wpa.conf $ wpa_supplicant -BDwext -imlan0 -c/tmp/wpa.conf $ udhcpc -b -i mlan0 BlueTooth $ /usr/libexec/bluetooth/bluetoothd -C & $ hciconfig hci0 up $ bluetoothctl $ discoverable on $ pairable on $ scan on [NEW] FC:18:3C:8D:75:F4 Device ID $ scan off $ pair FC:18:3C:8D:75:F4 $ connect FC:18:3C:8D:75:F4
3G使用方法(3G Testing Method)
Command: 3G (Telit HE910D) pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' user username password password /dev/ttyACM3 460800 nodetach crtscts debug usepeerdns defaultroute &
USB 測試方式(USB Test metod )
USB
Insert a USB disk
usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
串口使用方法(Serial Port Operating Method)
RS-232 Test
Command : stty -F /dev/ttymxc1 115200 echo Serial Port Test > /dev/ttymxc1
RS-422 setting
echo 134 > /sys/class/gpio/export echo 135 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio1/direction echo out > /sys/class/gpio/gpio2/direction echo 1 > /sys/class/gpio/gpio1/value echo 1 > /sys/class/gpio/gpio2/value
RS-422 test
Command : stty -F /dev/ttymxc1 115200 echo Serial Port Test > /dev/ttymxc1
RS-485 setting
echo 134 > /sys/class/gpio/export echo 135 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio1/direction echo out > /sys/class/gpio/gpio2/direction echo 0 > /sys/class/gpio/gpio1/value echo 1 > /sys/class/gpio/gpio2/value
RS-485 test
Command : stty -F /dev/ttymxc1 115200 echo Serial Port Test > /dev/ttymxc1
遠程訪問及文件傳輸(Remote Access and File Transimmion)
查看主板IP位址 ( Chech IP Address ):
Command : ifconfig
<img _fck_mw_filename="Eth0ssh 2021-09-10 143210.jpg" _fck_mw_origimgheight="395" _fck_mw_origimgwidth="1002" alt="RTENOTITLE" src="/wiki/images/5/52/Eth0ssh_2021-09-10_143210.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
Windows下SSH访问及文件传输
SSH Remote Log into Device
- SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
- 需要设置远程设备的IP、通讯端口(默认22)、通讯方式,登录后验证用户名密码
<img _fck_mw_filename="SSHsettingdetail.png" _fck_mw_origimgheight="600" _fck_mw_origimgwidth="748" alt="RTENOTITLE" src="/wiki/images/3/35/SSHsettingdetail.png" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="SSHSetting2021-09-10 143631.jpg" _fck_mw_origimgheight="437" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b6/SSHSetting2021-09-10_143631.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="Sshsetting12021-09-10 143743n.jpg" _fck_mw_origimgheight="363" _fck_mw_origimgwidth="576" alt="RTENOTITLE" src="/wiki/images/b/b0/Sshsetting12021-09-10_143743n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
<img _fck_mw_filename="RSB-3430 ssh connection.png" _fck_mw_origimgheight="449" _fck_mw_origimgwidth="821" alt="RTENOTITLE" src="/wiki/images/c/cf/RSB-3430_ssh_connection.png" style="vertical-align:middle;" title="RTENOTITLE" />
通用方法(General Method)
查看CPU温度(Check CPU Temperature)
root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600 # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°
查看CPU频率(Check CPU Frequency)
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq >> 900000 cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq >> 1200000
查看内存容量(Check Memory Capacity)
root@imx8qxprom5620a1:/# busybox free -m total used free shared buffers cached Mem: 1794920 516080 1278840 17252 9852 80292 -/+ buffers/cache: 425936 1368984 Swap: 0 0 0
查看存储容量(Check Storage Capacity)
root@imx8qxprom5620a1:/# busybox df -h Filesystem Size Used Available Use% Mounted on /dev/root 13.4G 1.7G 11.1G 13% / devtmpfs 395.8M 4.0K 395.8M 0% /dev tmpfs 876.4M 0 876.4M 0% /dev/shm tmpfs 876.4M 16.5M 859.9M 2% /run tmpfs 876.4M 0 876.4M 0% /sys/fs/cgroup tmpfs 876.4M 4.0K 876.4M 0% /tmp tmpfs 876.4M 280.0K 876.2M 0% /var/volatile /dev/mmcblk0p2 13.6G 1.7G 11.3G 13% /run/media/mmcblk0p2 /dev/mmcblk0p1 63.9M 23.4M 40.5M 37% /run/media/mmcblk0p1 /dev/mmcblk1p1 63.9M 23.4M 40.5M 37% /run/media/mmcblk1p1 tmpfs 175.3M 88.0K 175.2M 0% /run/user/0 root@imx8qxprom5620a1:/#
網路Ping測試(Ping Network Testing)
ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms
設置RTC (RTC Setting)
RTC : $ date MMDDhhmm[[CC]YY][.ss] $ hwclock -w $ ntpdate tw.pool.ntp.org
Audio 測試
Line out : $ aplay -D plughw:0,0 Advantech.wav MIC in : $ arecord -t wav -c 1 -r 44100 -d 10 test.wav
Display (LVDS:800x480)設置
U-boot command : setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} video=mxcfb0:dev=ldb,800x480M@60,if=RGB24
Linux BSP編譯方法(Linux BSP Compile Method)
<a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV9_User_Guide">Yocto 2.5</a>
<a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX6/Yocto_LBV8_User_Guide">Yocto 2.1</a>
_ |