Difference between revisions of "Test Report 7300A1AIM35UIV20006"

Latest revision as of 03:50, 18 May 2023

Project	Test Image Version	OS
EPC-R7300 DVT	7300A1AIM35UIV20006	Ubuntu 20.04

No	Module	Test Item	Test Steps	Owner	Result	Result Comment
1	DEBUG UART	ADI ADM3101EACPZ - UART2	System output and input		PASS
2	Camera	MIPI-CSI 0	$ sudo apt-get install v4l-utils $ dmesg \| grep -i 'nvcsi\\|imx219' $ v4l2-ctl --list-devices $ v4l2-compliance -d /dev/video0 $ v4l2-ctl --list-formats-ext $ v4l2-ctl -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat=RG10 --set-ctrl bypass_mode=0 --stream-mmap --stream-count=50 Preview $ export DISPLAY=:0 (debug console) $ gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM),format=NV12' ! nv3dsink sync=0 or $ gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=1920, height=1080, format=NV12, framerate=30/1' ! nv3dsink Capture $ nvargus_nvraw --c 0 --mode 0 --file /home/ubuntu/sample.nvraw --format "nvraw, raw, jpg, yuv"		PASS
		MIPI-CSI 1			PASS
		MIPI-CSI 2			PASS
		MIPI-CSI 3			PASS
3	UART	[40-PIN] UART 1 - RS232	Connet the Jumper to CN13 Pin 8 and Pin 10 (Loopback) $ stty -F /dev/ttyTHS0 speed 115200 raw -echo $ cat /dev/ttyTHS0 & $ echo "Serial Port Test" > /dev/ttyTHS0		PASS
4	WiFi	Wi-Fi test	Ubuntu Setting-->Wi-Fi-->ON or $ sudo nmcli device wifi $ sudo nmcli device wifi connect {SSID} ifname {ifconfig ex: wlp1s0} password {password}		PASS	EWM-159 (AW-CB375NF)
5	Bluetooth	Bluetooh test	$ hciconfig hci0 up $ bluetoothctl $ discoverable on $ pairable on $ scan on [NEW] FC:18:3C:8D:75:F4 myphone $ scan off $ pair FC:18:3C:8D:75:F4 $ connect FC:18:3C:8D:75:F4		PASS	EWM-159 (AW-CB375NF)
6	LTE/5G	LTE/5G	$ lsusb $ mmcli --list-modems $ mmcli -m 0 $ mmcli -m 0 -e $ mmcli -m 0 --set-allowed-modes='3g\|4g' --set-preferred-mode='4g' $ mmcli -m 0 --simple-connect="apn="internet"" $ mmcli -m 0 $ ip link set usb1 up $ udhcpc -i usb1 $ ping 8.8.8.8		PASS	AIW-355:HW需要re-work Bus 002 Device 004: ID 2cb7:0104 Fibocom Fibocom Modem_SN:B0113640
7	Ethernet	MDI	$ lspci $ ifconfig $ ping -I eth0 8.8.8.8		PASS	0008:00:00.0 PCI bridge: NVIDIA Corporation Device 229c (rev a1) 0008:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
7	Ethernet	PCIe port 2: PCIe to LAN Intel I225	$ lspci $ ifconfig $ ping -I eth1 8.8.8.8		PASS	0007:00:00.0 PCI bridge: NVIDIA Corporation Device 229a (rev a1) 0007:01:00.0 Ethernet controller: Intel Corporation Device 15f2 (rev 03)
8	M.2 Key M - NVMe SSD	PCIe port 0: M.2 Key M NVMe x4	Download image $ lspci		PASS	0004:00:00.0 PCI bridge: NVIDIA Corporation Device 229c (rev a1) 0004:01:00.0 Non-Volatile memory controller: Phison Electronics Corporation E12 NVMe Controller (rev 01)
9	M.2 Key E	USB 2.0 - BT	$ lsusb $ lsusb -t		PASS	EWM-159 (AW-CB375NF) Bus 001 Device 004: ID 13d3:3549 IMC Networks USB2.0 Hub
		PCIe port 1 - WIFI	$ lspci		PASS	EWM-159 (AW-CB375NF) 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 229e (rev a1) 0001:01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822CE 802.11ac PCIe Wireless Network Adapter
		UART 0	$ sudo -s # hciattach /dev/ttyTHS1 bcm43xx 3000000 flow -t 20 # hciconfig hci0 up # bluetoothctl # discoverable on # pairable on # scan on [NEW] FC:18:3C:8D:75:F4 myphone # scan off # pair FC:18:3C:8D:75:F4 # connect FC:18:3C:8D:75:F4		PASS	AW-CB511NF
		I2S1			N/A	No test equipment
10	M.2 Key B	USB 2.0	$ lsusb $ lsusb -t		PASS	Sierra EM7355 4G Bus 001 Device 004: ID 1199:9041 Sierra Wireless, Inc. USB2.0 Hub
		USB 3.0	$ lsusb $ lsusb -t		PASS	AIW-355 5G Bus 002 Device 004: ID 2cb7:0104 Fibocom Fibocom Modem_SN:B0113640
		PCIe port 3	$ lspci		N/A	No test equipment
11	USB	USB2.0 Port 2: GL852 port1 - UIO1 (USB1)	$ lsusb $ lsusb -t		PASS
		USB2.0 Port 2: GL852 port2 - UIO1 (USB2)			PASS
		USB2.0 Port 2: GL852 port3 - M.2 KEY E (USB3_M2E_N)			PASS	EWM-159 (AW-CB375NF) Bus 001 Device 004: ID 13d3:3549 IMC Networks USB2.0 Hub
		USB2.0 Port 2: GL852 port4 - CP2105-F01-GM			PASS	/dev/ttyUSB0, /dev/ttyUSB1
		USB2.0 Port0: GL3590 USB2.0 port 1 - UIO1 (USB_HUB_A)			PASS
		USB2.0 Port0: GL3590 USB2.0 port 2 - TypeA down (USB_HUB_W)			PASS
		USB2.0 Port0: GL3590 USB2.0 port 3 - TypeA up (USB_HUB_X)			PASS
		USB2.0 Port0: GL3590 USB2.0 port 4 - M.2 KEY B (USB_HUB_Y)			PASS	Sierra EM7355 4G Bus 001 Device 004: ID 1199:9041 Sierra Wireless, Inc. USB2.0 Hub
		USB3.0 Port0: GL3590 USB3.0 port 2- TypeA down (USB_HUB_W)			PASS
		USB3.0 Port0: GL3590 USB3.0 port 3 - TypeA up (USB_HUB_X)			PASS
		USB3.0 Port1 - M.2 KEY B (LTE/5G)			PASS	AIW-355 5G Bus 002 Device 004: ID 2cb7:0104 Fibocom Fibocom Modem_SN:B0113640
		USB3.0 Port2 - USB_UIO_A			PASS
		USb2.0 Port 0: Micro USB - Device mode	Download image		PASS
12	CAN BUS		$ modprobe can $ modprobe can-dev $ modprobe mttcan $ ip link set can0 up type can bitrate 125000 $ ifconfig can0 up $ candump can0 & $ cansend can0 1F334455#1122334455667788		PASS	HW需要re-work
13	HDMI				PASS
14	RTC	CR2032 - RTC external	Remove all internet $ date 010610452023 && hwclock -w && date $ date 010100002000 && hwclock -r && date $ hwclock -s && date $ reboot $ hwclock -s && date		PASS	由於設定CONFIG_RTC_HCTOSYS_DEVICE="rtc1" 只有/dev/rtc1才可以設定硬體時間到系統時間
15	GPIO	TI TXB0108RGYR LF - GPIO	$ echo 310 > /sys/class/gpio/export $ echo out > /sys/class/gpio/gpio310/direction $ echo 1 > /sys/class/gpio/gpio310/value $ echo 389 > /sys/class/gpio/export $ echo out > /sys/class/gpio/PG.06/direction $ echo 1 > /sys/class/gpio/PG.06/value		PASS	[CN13 40 pin] GPIO01_LF: gpio 310 (gpio310) GPIO07_LF: gpio 389 (PG.06) GPIO09_LF: gpio 307 (gpio307) HW需要re-work GPIO11_LF: gpio 311 (gpio311) GPIO12_LF: gpio 433 (PN.01) GPIO13_LF: gpio 391 (PH.00)
15	GPIO	NXP PCA6416AHF - GPIO	$ echo 284 > /sys/class/gpio/export $ echo out > /sys/class/gpio/gpio284/direction $ echo 1 > /sys/class/gpio/gpio284/value ##gpio297 & gpio298 need to set the gpio299 to high## $ echo 299 > /sys/class/gpio/export $ echo out > /sys/class/gpio/gpio299/direction $ echo 1 > /sys/class/gpio/gpio299/value		PASS	10 pins [EXTENSION I/O A] pin#2: gpio 284 pin#4: gpio 285 [EXTENSION I/O B] pin#5: gpio 286 pin#6: gpio 287 pin#7: gpio 288 pin#8: gpio 289 pin#9: gpio 290 pin#10: gpio 291 pin#11: gpio 297 or gpio 329 (PCC.01) (Default) pin#12: gpio 298 or gpio 331 (PCC.03) (Default)
16	Auido	HDMI	$ aplay -D hw:0,3 Advantech.wav		PASS
		Realtek ALC5640 - I2S1 Line-Out	$ amixer -c 1 cset name="CVB-RT Stereo DAC MIXR DAC R1 Switch" "1" $ amixer -c 1 cset name="CVB-RT Stereo DAC MIXL DAC L1 Switch" "1" $ amixer -c 1 cset name="CVB-RT HPO MIX DAC1 Switch" "1" $ amixer -c 1 cset name="CVB-RT HP R Playback Switch" "on" $ amixer -c 1 cset name="CVB-RT HP L Playback Switch" "on" $ aplay -D hw:1,1 <WAV file>		PASS
		Realtek ALC5640 - I2S1 Mic-In	$ amixer -c 1 cset name="CVB-RT ADC Capture Switch" "1" $ amixer -c 1 cset name="CVB-RT ADC IF1 Data Switch" "1" $ amixer -c 1 cset name="CVB-RT RECMIXL BST1 Switch" "1" $ amixer -c 1 cset name="CVB-RT RECMIXR BST1 Switch" "1" $ amixer -c 1 cset name="CVB-RT Stereo ADC MIXL ADC1 Switch" "1" $ amixer -c 1 cset name="CVB-RT Stereo ADC MIXR ADC1 Switch" "1" $ arecord -D hw:1,1 -r 44100 -c 2 -f S16_LE output.wav		PASS
		TI TXB0108RGYR LF - I2S0			N/A	No test equipment
17	SPI	TI TXB0108RGYR LF - SPI0_CS0	$ echo -n $'\x06\x05\x04\x03\x02\x01' > test $ dd if=test of=/dev/mtd0 $ hexdump -C /dev/mtd0 -n 64		PASS	ROM-EG70 /dev/mtd0 /dev/mtd1 /dev/mtd2 /dev/mtd3
		TI TXB0108RGYR LF - SPI0_CS1			PASS
		TI TXB0108RGYR LF - SPI1_CS0			PASS
		TI TXB0108RGYR LF - SPI1_CS1			PASS
18	I2C	CPU I2C0	40 pins IO - 0x50: EEPROM $ i2cdetect -y -r 1 $ echo -n $'\x06\x05\x04\x03\x02\x01' > test $ dd if=test of=/sys/bus/i2c/devices/1-0050/eeprom $ hexdump -C /sys/bus/i2c/devices/1-0050/eeprom -n 64		PASS	[i2c-1]
		CPU I2C1	UIO Board - 0x50: EEPROM $ i2cdetect -y -r 7 $ echo -n $'\x06\x05\x04\x03\x02\x01' > test $ dd if=test of=/sys/bus/i2c/devices/7-0050/eeprom $ hexdump -C /sys/bus/i2c/devices/7-0050/eeprom -n 64		PASS	[i2c-7],HW需要re-work
		CPU I2C2	0x20: NXP PCA6416AHF $ i2cdetect -y -r 0		PASS	[i2c-0]
			0x21: NXP PCA6416AHF $ i2cdetect -y -r 0		PASS	[i2c-0]
			0x57: EEPROM $ i2cdetect -y -r 0		PASS	[i2c-0]
			0x70: TI TCA9545APWR $ i2cdetect -y -r 0		PASS	[i2c-0]
		CPU I2C_CAM	0x70: TI TCA9545APWR $ i2cdetect -y -r 2		PASS	[i2c-2]
		I2C Expanded 1	I2C1 - 0x1C: Codec ALC5640 $ i2cdetect -y -r 10		PASS	[i2c-10]
			40 pins IO - 0x51: EEPROM $ i2cdetect -y -r 11		PASS	[i2c-11], HW需要re-work
			I2C3 - 0x2E: TPM $ i2cdetect -y -r 12		PASS	[i2c-12]
		I2C Expanded 2	I2C0 - 0x10 : Camera $ i2cdetect -y -r 13		PASS	[i2c-13]
			I2C1 - 0x10 : Camera $ i2cdetect -y -r 14		PASS	[i2c-14]
			I2C2 - 0x10 : Camera $ i2cdetect -y -r 15		PASS	[i2c-15]
			I2C3 - 0x10 : Camera $ i2cdetect -y -r 16		PASS	[i2c-16]
19	WATCHDOG	Internal Watchdog	Detect gpio signal 1.$ echo 1 > /dev/watchdog ==> System will reboot after 120 sec. 2. $ echo c > /proc/sysrq-trigger ==> System will reboot after 120 sec.		PASS
20	Button	Reset Button	Reset system		PASS
20	Button	Recovery Button	Recovery / Download		PASS
21	Recovery & Rescue	Downalod via USB			PASS	HW需要re-work
22	Warm Reboot	Warm Reboot	$ reboot		PASS
23	TPM		方法1: # ./tpm_test.bin 方法2: (0)安裝TPM2 tools # apt-get install tpm2-tools (1)產生randon code # tpm2_getrandom --hex 20 (2)對指定檔案msg.dat加密 # tpm2_createprimary -C p -c platform_primary.ctx # tpm2_create -C platform_primary.ctx -G rsa2048 -u key.pub -r key.priv # tpm2_load -C platform_primary.ctx -u key.pub -r key.priv -c key.ctx # echo "my test" >msg.dat # tpm2_rsaencrypt -c key.ctx -o msg.enc msg.dat # cat msg.enc # tpm2_rsadecrypt -c key.ctx -o msg.ptext msg.enc # cat msg.ptext # cat msg.dat (3)將資料儲存至tpm內存 # tpm2_nvdefine -Q 0x1500031 -C o -s 32 -a "ownerread\|policywrite\|ownerwrite" # echo "write_tpm_adv" > adv.data # tpm2_nvwrite -Q 0x1500031 -C o -i adv.data # tpm2_nvread -Q 0x1500031 -C o -s 32 -o read.data # cat read.data (4)確認已經寫入儲存區域 # tpm2_nvreadpublic > nv.out # cat nv.out		PASS
24	PWM Fan	CN12			PASS	HW需要re-work
25	LED Lights	Power	Power on the device		PASS	Green light: Always On
		GPIO	LED ON: echo 255 > /sys/class/leds/user/brightness LED OFF: echo 0 > /sys/class/leds/user/brightness		PASS
		Ethernet Lan 1 - Link			PASS	1. 10M: Always Off 2. 100M: Always Off (HW limitation) 3. 1000M-Green light: Always On
		Ethernet Lan 1 - Active			PASS	Green light: Flashing On
		Ethernet Lan 2 - Link	需要燒FW		PASS	1. 10M: Always Off 2. 100M-Orange light: Always On 3. 1000M-Green light: Always On
		Ethernet Lan 2 - Active	需要燒FW		PASS	Green light: Flashing On

UIO-4030
No	Module	Test Item	Test Steps	Owner	Result	Result Comment
1	RS485	TI_SN65HVD75DR (COM_4)	Test RS-485 with Adam-4520. Adam-4520 Pin Data- and Pin Data+ connect to UIO-4030 COM_4 Pin 1 and Pin 2. $ stty -F /dev/ttyUSB2 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $ cat /dev/ttyUSB2 & $ echo "Serial Test" > /dev/ttyUSB2		PASS
2	RS232	(COM_3)	$ stty -F /dev/ttyUSB0 -echo 115200 $ cat /dev/ttyUSB0 & $ echo "Serial Port Test" > /dev/ttyUSB0		PASS	/dev/ttyUSB0 HW需要re-work
3	GPIO	(CN3_GPIO)			PASS
4	EEPROM	ST_M24C02-FMN6TP			PASS

UIO-4032
No	Module	Test Item	Test Steps	Owner		Result Comment
1	RS232	(COM_3)	$ stty -F /dev/ttyUSB0 -echo 115200 $ cat /dev/ttyUSB0 & $ echo "Serial Port Test" > /dev/ttyUSB0		PASS	/dev/ttyUSB0 HW需要re-work
1	RS232	(COM_4)	$ stty -F /dev/ttyUSB1 -echo 115200 $ cat /dev/ttyUSB1 & $ echo "Serial Port Test" > /dev/ttyUSB1		PASS	/dev/ttyUSB1 HW需要re-work
2	USB-A	(USB_1)	$ lsusb -t		PASS
3		(USB_2)	$ lsusb -t		PASS
4	LAN	SMSC LAN7500-ABZJ	$ ifconfig $ ping -I eth2 8.8.8.8		PASS
5	EEPROM	ST_M24C02-FMN6TP			PASS

UIO-4034
No	Module	Test Item	Test Steps	Owner		Result Comment
1	RS232	(COM_3)	$ stty -F /dev/ttyUSB0 -echo 115200 $ cat /dev/ttyUSB0 & $ echo "Serial Port Test" > /dev/ttyUSB0		PASS	/dev/ttyUSB0 HW需要re-work
1	RS232	(COM_4)	$ stty -F /dev/ttyUSB1 -echo 115200 $ cat /dev/ttyUSB1 & $ echo "Serial Port Test" > /dev/ttyUSB1		PASS	/dev/ttyUSB1 HW需要re-work
2	CAN	CAN	$ modprobe can $ modprobe can-dev $ modprobe mttcan $ ip link set can0 up type can bitrate 125000 $ ifconfig can0 up $ candump can0 & $ cansend can0 1F334455#1122334455667788		PASS
3	EEPROM	ST_M24C02-FMN6TP			PASS

UIO-4036
No	Module	Test Item	Test Steps	Owner		Result Comment
1	LAN	SMSC LAN7500-ABZJ			PASS
2	LAN Switch	Realtek RTL8368MBI-CG			PASS
3	EEPROM	ST_M24C02-FMN6TP			PASS

UIO-4038
No	Module	Test Item	Test Steps	Owner		Result Comment
1	WAN				PASS
2	LAN1				PASS
3	LAN2				PASS
4	LAN3				PASS
5	LAN4				PASS
6	Debug UART				PASS
7	USB		USB disk write/read/verify pattern		PASS
8	Restore Button		Press the reset button about 10 seconds, the system will reset and reboot. The system will reset to default		PASS
9	EEPROM	ST_M24C02-FMN6TP			PASS

UIO-4040
No	Module	Test Item	Test Steps	Owner		Result Comment
1	SSD	SMSC LAN7500-ABZJ	SSD disk write/read/verify pattern		PASS
2	EEPROM	ST_M24C02-FMN6TP			PASS

Difference between revisions of "Test Report 7300A1AIM35UIV20006"

Latest revision as of 03:50, 18 May 2023

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 1: / Line 1: @@
-{| style="border-collapse:collapse; width:1322pt; border:none" width="1761"
+{| class="Table" style="width:1080.0pt; border-collapse:collapse; border:none" width="0"
-|- height="22" style="height:16.5pt"
+|- style="height:16.5pt"
-| class="xl81" height="22" style="height:16.5pt; width:70pt" width="93" | Project
+| nowrap="nowrap" style="width:70.0pt; border:solid windowtext 1.0pt" width="93" |
-| class="xl81" style="border-left:none; width:184pt" width="245" | Test Image Version
+<span style="height:16.5pt"><span lang="EN-US" style="font-family:" verdana",sans-serif"="">Project</span></span>
-| class="xl81" style="border-left:none; width:337pt" width="449" | OS
-| class="xl71" style="width:233pt" width="311" | &nbsp;
+| nowrap="nowrap" style="width:184.0pt; border:solid windowtext 1.0pt; border-left:none" width="245" |
-| class="xl71" style="width:74pt" width="99" | &nbsp;
+<span style="height:16.5pt"><span lang="EN-US" style="font-family:" verdana",sans-serif"="">Test Image Version</span></span>
-| class="xl71" style="width:95pt" width="126" | &nbsp;
-| class="xl71" style="width:329pt" width="438" | &nbsp;
+| nowrap="nowrap" style="width:337.8pt; border:solid windowtext 1.0pt; border-left:none" width="450" |
-|
+<span style="height:16.5pt"><span lang="EN-US" style="font-family:" verdana",sans-serif"="">OS</span></span>
+| nowrap="nowrap" style="width:233.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="351" | &nbsp;
+| nowrap="nowrap" style="width:74.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="99" | &nbsp;
+| nowrap="nowrap" style="width:95.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="127" | &nbsp;
+| nowrap="nowrap" style="width:329.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="439" | &nbsp;
+|- style="height:16.5pt"
+| nowrap="nowrap" style="width:70.0pt; border:solid windowtext 1.0pt; border-top:none" width="93" |
+<span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">EPC-R7300 DVT</span></span></span>
+| nowrap="nowrap" style="width:184.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt" width="245" |
+<span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">7300A1AIM35UIV20006</span></span></span>
+| nowrap="nowrap" style="width:337.8pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt" width="450" |
+<span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">Ubuntu 20.04</span></span></span>
+| nowrap="nowrap" style="width:233.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="351" | &nbsp;
+| nowrap="nowrap" style="width:74.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="99" | &nbsp;
+| nowrap="nowrap" style="width:95.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="127" | &nbsp;
+| nowrap="nowrap" style="width:329.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="439" | &nbsp;
+|- style="height:16.5pt"
+| nowrap="nowrap" style="width:70.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="93" | &nbsp;
+| nowrap="nowrap" style="width:184.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="245" | &nbsp;
+| nowrap="nowrap" style="width:337.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="450" | &nbsp;
+| nowrap="nowrap" style="width:233.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="351" | &nbsp;
+| nowrap="nowrap" style="width:74.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="99" | &nbsp;
+| nowrap="nowrap" style="width:95.
-| class="xl125" style="border-top:none; border-left:none; width:74pt" width="99" |
+| style="width:337.8pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white" width="450" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">ST_M24C02-FMN6TP</span></span></span></p>
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| style="width:233.8pt; border:solid windowtext 1.0pt; border-left:none; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="351" | &nbsp;
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" | AIW-355 5G<br/> Bus 002 Device 004: ID 2cb7:0104 Fibocom Fibocom Modem_SN:B0113640
+| style="width:74.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="99" | &nbsp;
-|- height="34" style="height:25.5pt"
+| style="width:95.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:#00b050" width="127" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-family:" verdana",sans-serif"=""><span style="color:white">PASS</span></span>'''</span></p>
-| class="xl129" height="34" style="height:25.5pt; border-top:none; border-left:none; width:337pt" width="449" | USB3.0 Port2 - USB_UIO_A
+| style="width:329.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="439" | &nbsp;
-| class="xl125" style="border-top:none; border-left:none; width:74pt" width="99" |
+|- style="height:16.5pt"
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| nowrap="nowrap" style="width:70.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="93" | &nbsp;
-| class="xl126" style="border-top:none; border-left:none" |
+| nowrap="nowrap" style="width:184.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="245" | &nbsp;
-|- height="22" style="height:16.5pt"
+| nowrap="nowrap" style="width:337.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="450" | &nbsp;
-| align="left" height="22" style="width:337pt" width="449" | [[File:|0x16px]]
+| nowrap="nowrap" style="width:233.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="351" | &nbsp;
-{| style="height:16.5pt; border:none"
+| nowrap="nowrap" style="width:74.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="99" | &nbsp;
-|-
+| nowrap="nowrap" style="width:95.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="127" | &nbsp;
-| class="xl73" height="22" style="border-top:none; border-left:none; width:337pt" width="449" | <span style="height:16.5pt">USb2.0 Port 0: Micro USB - Device mode</span>
+| nowrap="nowrap" style="width:329.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="439" | &nbsp;
-|}
+|- style="height:16.5pt"
+| nowrap="nowrap" style="width:70.0pt" width="93" |
+<span style="height:16.5pt">'''<span lang="EN-US" style="font-family:" verdana",sans-serif"=""><span style="color:black">UIO-4040</span></span>'''</span>
-| align="left" style="width:233pt" width="311" | [[File:|0x9px]]
+| nowrap="nowrap" style="width:184.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="245" | &nbsp;
-| class="xl77" style="border-top:none; border-left:none; width:74pt" width="99" |
+| nowrap="nowrap" style="width:337.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="450" | &nbsp;
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| nowrap="nowrap" style="width:233.8pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="351" | &nbsp;
-| class="xl83" style="border-top:none; border-left:none" |
+| nowrap="nowrap" style="width:74.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="99" | &nbsp;
-|- height="119" style="height:89.25pt"
+| nowrap="nowrap" style="width:95.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="127" | &nbsp;
-| class="xl89" height="119" style="height:89.25pt; border-top:none; width:70pt" width="93" | 12
+| nowrap="nowrap" style="width:329.0pt; padding:0cm 1.4pt 0cm 1.4pt; height:16.5pt" width="439" | &nbsp;
-| class="xl84" style="border-top:none; border-left:none; width:184pt" width="245" | CAN BUS
+|- style="height:16.5pt"
-| class="xl73" style="border-top:none; border-left:none; width:337pt" width="449" |
+| style="width:70.0pt; background:#8497b0" width="93" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"=""><span style="color:white">No</span></span></span>'''</span></p>
-| class="xl97" style="border-top:none; border-left:none; width:233pt" width="311" | $ modprobe can<br/> $ modprobe can-dev<br/> $ modprobe mttcan<br/> $ ip link set can0 up type can bitrate 125000<br/> $ ifconfig can0 up<br/> $ candump can0 &<br/> $ cansend can0 1F334455#1122334455667788
+| style="width:184.0pt; background:#8497b0" width="245" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"=""><span style="color:white">Module</span></span></span>'''</span></p>
-| class="xl77" style="border-top:none; border-left:none; width:74pt" width="99" |
+| style="width:337.8pt; background:#8497b0" width="450" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"=""><span style="color:white">Test Item</span></span></span>'''</span></p>
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| style="width:233.8pt; background:#8497b0" width="351" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"=""><span style="color:white">Test Steps</span></span></span>'''</span></p>
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" | HW<font class="font12">需要</font><font class="font11">re-work</font>
+| style="width:74.0pt; background:#8497b0" width="99" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"=""><span style="color:white">Owner</span></span></span>'''</span></p>
-|- height="22" style="height:16.5pt"
+| style="width:95.0pt; background:#8497b0; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="127" | &nbsp;
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 13
+| style="width:329.0pt; background:#8497b0" width="439" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"=""><span style="color:white">Result Comment</span></span></span>'''</span></p>
-| class="xl84" style="border-top:none; border-left:none; width:184pt" width="245" | HDMI
+|- style="height:16.5pt"
-| class="xl73" style="border-top:none; border-left:none; width:337pt" width="449" |
+| style="width:70.0pt; border:solid windowtext 1.0pt" width="93" |
-| class="xl74" style="border-top:none; border-left:none; width:233pt" width="311" |
+<span style="height:16.5pt"><span lang="EN-US" style="font-family:" verdana",sans-serif"="">1</span></span>
-| class="xl75" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl111" style="border-top:none; border-left:none" |
-|- height="102" style="height:76.5pt"
-| class="xl89" height="102" style="height:76.5pt; border-top:none; width:70pt" width="93" | 14
-| class="xl84" style="border-top:none; border-left:none; width:184pt" width="245" | RTC
-| class="xl73" style="border-top:none; border-left:none; width:337pt" width="449" | CR2032 - RTC external
-| class="xl74" style="border-top:none; border-left:none; width:233pt" width="311" | Remove all internet<br/> <font class="font10">$ date 010610452023 && hwclock -w && date<br/> $ date 010100002000 && hwclock -r && date<br/> $ hwclock -s && date<br/> $ reboot<br/> $ hwclock -s && date</font>
-| class="xl82" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl108" style="border-top:none; border-left:none; width:329pt" width="438" | <font class="font7">由於設定</font><font class="font5">CONFIG_RTC_HCTOSYS_DEVICE="rtc1"</font><br/> <font class="font7">只有</font><font class="font5">/dev/rtc1</font><font class="font7">才可以設定硬體時間到系統時間</font>
-|- height="121" style="height:90.75pt"
-| class="xl155" height="342" rowspan="2" style="border-bottom:.5pt solid black; height:256.5pt; border-top:none; width:70pt" width="93" | 15
-| class="xl90" rowspan="2" style="border-bottom:.5pt solid black; border-top:none; width:184pt" width="245" | GPIO
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | TI TXB0108RGYR LF - GPIO
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ echo 310 > /sys/class/gpio/export<br/> $ echo out > /sys/class/gpio/gpio310/direction<br/> $ echo 1 > /sys/class/gpio/gpio310/value<br/> <br/> $ echo 389 > /sys/class/gpio/export<br/> $ echo out > /sys/class/gpio/PG.06/direction<br/> $ echo 1 > /sys/class/gpio/PG.06/value
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl124" style="border-top:none; border-left:none; width:329pt" width="438" | [CN13 40 pin]<br/> GPIO01_LF: gpio 310 (gpio310)<br/> GPIO07_LF: gpio 389 (PG.06)<br/> GPIO09_LF: gpio 307 (gpio307) <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font><br/> <font class="font5">GPIO11_LF: gpio 311 (gpio311)<br/> GPIO12_LF: gpio 433 (PN.01)<br/> GPIO13_LF: gpio 391 (PH.00)</font>
-|- height="221" style="height:165.75pt"
-| class="xl79" height="221" style="height:165.75pt; border-top:none; border-left:none; width:337pt" width="449" | NXP PCA6416AHF - GPIO
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" | <font class="font10">$ echo 284 > /sys/class/gpio/export<br/> $ echo out > /sys/class/gpio/gpio284/direction<br/> $ echo 1 > /sys/class/gpio/gpio284/value</font><br/> <br/> <font class="font5">##gpio297 & gpio298 need to set the gpio299 to high##</font><br/> <font class="font10">$ echo 299 > /sys/class/gpio/export<br/> $ echo out > /sys/class/gpio/gpio299/direction<br/> $ echo 1 > /sys/class/gpio/gpio299/value</font>
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl124" style="border-top:none; border-left:none; width:329pt" width="438" | 10 pins<br/> [EXTENSION I/O A]<br/> pin#2: gpio 284<br/> pin#4: gpio 285<br/> [EXTENSION I/O B]<br/> pin#5: gpio 286<br/> pin#6: gpio 287<br/> pin#7: gpio 288<br/> pin#8: gpio 289<br/> pin#9: gpio 290<br/> pin#10: gpio 291<br/> pin#11: gpio 297 or <font class="font13">gpio 329 (PCC.01) (Default)</font><br/> <font class="font5">pin#12: gpio 298 or </font><font class="font13">gpio 331 (PCC.03) (Default)</font>
-|- height="22" style="height:16.5pt"
-| class="xl155" height="452" rowspan="4" style="border-bottom:.5pt solid black; height:339.0pt; border-top:none; width:70pt" width="93" | 16
-| class="xl160" rowspan="4" style="border-bottom:.5pt solid black; border-top:none; width:184pt" width="245" | Auido
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | HDMI
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ aplay -D hw:0,3 Advantech.wav
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl126" style="border-top:none; border-left:none" |
-|- height="187" style="height:140.25pt"
-| class="xl79" height="187" style="border-top:none; border-left:none; width:337pt" width="449" | Realtek ALC5640 - I2S1<br/> Line-Out
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ amixer -c 1 cset name="CVB-RT Stereo DAC MIXR DAC R1 Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT Stereo DAC MIXL DAC L1 Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT HPO MIX DAC1 Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT HP R Playback Switch" "on"<br/> $ amixer -c 1 cset name="CVB-RT HP L Playback Switch" "on"<br/> $ aplay -D hw:1,1 <WAV file>
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl126" style="border-top:none; border-left:none" |
-|- height="221" style="height:165.75pt"
-| class="xl79" height="221" style="border-top:none; border-left:none; width:337pt" width="449" | Realtek ALC5640 - I2S1<br/> Mic-In
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ amixer -c 1 cset name="CVB-RT ADC Capture Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT ADC IF1 Data Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT RECMIXL BST1 Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT RECMIXR BST1 Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT Stereo ADC MIXL ADC1 Switch" "1"<br/> $ amixer -c 1 cset name="CVB-RT Stereo ADC MIXR ADC1 Switch" "1"<br/> $ arecord -D hw:1,1 -r 44100 -c 2 -f S16_LE output.wav
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl126" style="border-top:none; border-left:none" |
-|- height="22" style="height:16.5pt"
-| class="xl73" height="22" style="height:16.5pt; border-top:none; border-left:none; width:337pt" width="449" | TI TXB0108RGYR LF - I2S0
-| class="xl74" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl75" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#bf8f00" width="126" | N/A
-| class="xl114" style="border-top:none; border-left:none; width:329pt" width="438" | No test equipment
-|- height="24" style="height:18.0pt"
-| class="xl155" height="90" rowspan="4" style="border-bottom:.5pt solid black; height:67.5pt; border-top:none; width:70pt" width="93" | 17
-| class="xl160" rowspan="4" style="border-bottom:.5pt solid black; border-top:none; width:184pt" width="245" | SPI&nbsp;
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | TI TXB0108RGYR LF - SPI0_CS0
-| class="xl152" rowspan="4" style="border-bottom:.5pt solid black; border-top:none; width:233pt" width="311" | $ echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> $ dd if=test of=/dev/mtd0<br/> $ hexdump -C /dev/mtd0 -n 64
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl150" rowspan="4" style="border-bottom:.5pt solid black; border-top:none; width:329pt" width="438" | ROM-EG70<br/> /dev/mtd0<br/> /dev/mtd1<br/> /dev/mtd2<br/> /dev/mtd3
-|- height="22" style="height:16.5pt"
-| class="xl79" height="22" style="height:16.5pt; border-top:none; border-left:none; width:337pt" width="449" | TI TXB0108RGYR LF - SPI0_CS1
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-|- height="22" style="height:16.5pt"
-| class="xl145" height="22" style="height:16.5pt; border-top:none; border-left:none; width:337pt" width="449" | TI TXB0108RGYR LF - SPI1_CS0
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-|- height="22" style="height:16.5pt"
-| class="xl145" height="22" style="height:16.5pt; border-left:none; width:337pt" width="449" | TI TXB0108RGYR LF - SPI1_CS1
-| class="xl138" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-|- height="102" style="height:76.5pt"
-| class="xl155" height="612" rowspan="14" style="height:459.0pt; border-top:none; width:70pt" width="93" | 18
-| class="xl163" rowspan="14" style="border-right:.5pt solid black; border-top:none; width:184pt" width="245" | I2C
-| class="xl88" style="border-left:none" | CPU I2C0
-| class="xl105" style="border-top:none; width:233pt" width="311" | 40 pins IO - 0x50: EEPROM<br/> <font class="font10">$ i2cdetect -y -r 1<br/> $ echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> $ dd if=test of=/sys/bus/i2c/devices/1-0050/eeprom<br/> $ hexdump -C /sys/bus/i2c/devices/1-0050/eeprom -n 64</font>
-| class="xl86" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl134" style="border-top:none; border-left:none" | [i2c-1]
-|- height="102" style="height:76.5pt"
-| class="xl106" height="102" style="height:76.5pt; border-top:none; border-left:none" | CPU I2C1
-| class="xl105" style="border-top:none; width:233pt" width="311" | UIO Board - 0x50: EEPROM<br/> <font class="font10">$ i2cdetect -y -r 7<br/> $ echo -n $'\x06\x05\x04\x03\x02\x01' > test<br/> $ dd if=test of=/sys/bus/i2c/devices/7-0050/eeprom<br/> $ hexdump -C /sys/bus/i2c/devices/7-0050/eeprom -n 64</font>
-| class="xl86" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl134" style="border-top:none; border-left:none" | [i2c-7],<font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="34" style="height:25.5pt"
-| class="xl79" height="136" rowspan="4" style="height:102.0pt; width:337pt" width="449" | CPU I2C2
-| class="xl139" style="border-top:none; width:233pt" width="311" | 0x20: NXP PCA6416AHF<br/> <font class="font10">$ i2cdetect -y -r 0</font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-0]
-|- height="34" style="height:25.5pt"
-| align="left" height="34" style="width:233pt" width="311" | [[File:|0x25px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf></x:sizewithcells></x:clientdata> [[File:|0x25px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf></x:sizewithcells></x:clientdata> [[File:|0x25px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf></x:sizewithcells></x:clientdata> [[File:|0x25px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf></x:sizewithcells></x:clientdata>
-{| style="height:25.5pt; border:undefined"
-|-
-| height="0" width="0" | &nbsp;
-| width="1" | &nbsp;
-| width="96" | &nbsp;
-| width="1" | &nbsp;
-| width="2" | &nbsp;
-| width="1" | &nbsp;
-|-
-| height="6" | &nbsp;
-| align="left" rowspan="3" | <span style="position:absolute; margin-left:96px; margin-top:23px; width:101px"><span style="z-index:30"><span style="height:25.5pt">[[File:|1x16px]]</span></span></span>
-| &nbsp;
-| align="left" | <span style="position:absolute; margin-left:96px; margin-top:23px; width:101px">[[File:|1x6px]]</span>
-| &nbsp;
-| align="left" rowspan="2" | <span style="position:absolute; margin-left:96px; margin-top:23px; width:101px">[[File:|1x15px]]</span>
-|-
-| height="9" | &nbsp;
-|-
-| height="1" | &nbsp;
-|}
-{| style="height:25.5pt; border:none"
+| style="width:184.0pt; border:solid windowtext 1.0pt; border-left:none; background:white" width="245" |
-|-
+<span style="height:16.5pt">'''<span lang="EN-US" style="font-family:" verdana",sans-serif"="">SSD</span>'''</span>
-| class="xl139" height="34" style="border-top:none; width:233pt" width="311" | <span style="height:25.5pt">0x21: NXP PCA6416AHF<br/> <font class="font10">$ i2cdetect -y -r 0</font></span>
-|}
-| class="xl136" style="border-top:none" |
+| style="width:337.8pt; border:solid windowtext 1.0pt; border-left:none; background:white" width="450" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">SMSC LAN7500-ABZJ</span></span></span></p>
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| nowrap="nowrap" style="width:233.8pt; border-top:solid windowtext 1.0pt; border-left:none; border-bottom:none; border-right:solid windowtext 1.0pt; background:white" width="351" |
-| class="xl128" style="border-top:none; border-left:none" | [i2c-0]
+<span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">SSD disk write/read/verify pattern</span></span></span>
-|- height="34" style="height:25.5pt"
-| class="xl139" height="34" style="border-top:none; width:233pt" width="311" | 0x57: EEPROM<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 0</font></font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-0]
-|- height="34" style="height:25.5pt"
-| class="xl139" height="34" style="border-top:none; width:233pt" width="311" | 0x70: TI TCA9545APWR<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 0</font></font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-0]
-|- height="34" style="height:25.5pt"
-| class="xl79" height="34" style="height:25.5pt; border-top:none; border-left:none; width:337pt" width="449" | CPU I2C_CAM
-| class="xl139" style="border-top:none; width:233pt" width="311" | 0x70: TI TCA9545APWR<br/> <font class="font10">$ i2cdetect -y -r 2</font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-2]
-|- height="34" style="height:25.5pt"
-| class="xl79" height="102" rowspan="3" style="height:76.5pt; border-top:none; width:337pt" width="449" | I2C Expanded 1
-| class="xl135" style="width:233pt" width="311" | I2C1 - 0x1C: Codec ALC5640<br/> <font class="font10">$ i2cdetect -y -r 10</font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-10]
-|- height="34" style="height:25.5pt"
-| class="xl137" height="34" style="border-top:none; width:233pt" width="311" | 40 pins IO - 0x51: EEPROM<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 11</font></font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl127" style="border-top:none; border-left:none; width:329pt" width="438" | [i2c-11], <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="34" style="height:25.5pt"
-| class="xl137" height="34" style="border-top:none; width:233pt" width="311" | I2C3 - 0x2E: TPM<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 12</font></font>
-| class="xl123" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-12]
-|- height="34" style="height:25.5pt"
-| class="xl79" height="136" rowspan="4" style="height:102.0pt; border-top:none; width:337pt" width="449" | I2C Expanded 2
-| class="xl135" style="width:233pt" width="311" | I2C0 - 0x10 : Camera<br/> <font class="font10">$ i2cdetect -y -r 13</font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-13]
-|- height="34" style="height:25.5pt"
-| class="xl137" height="34" style="border-top:none; width:233pt" width="311" | I2C1 - 0x10 : Camera<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 14</font></font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-14]
-|- height="34" style="height:25.5pt"
-| class="xl137" height="34" style="border-top:none; width:233pt" width="311" | I2C2 - 0x10 : Camera<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 15</font></font>
-| class="xl136" style="border-top:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-15]
-|- height="34" style="height:25.5pt"
-| class="xl137" height="34" style="border-top:none; width:233pt" width="311" | I2C3 - 0x10 : Camera<br/> <font class="font10"><font style="height:25.5pt">$ i2cdetect -y -r 16</font></font>
-| class="xl123" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl128" style="border-top:none; border-left:none" | [i2c-16]
-|- height="85" style="height:63.75pt"
-| class="xl89" height="85" style="height:63.75pt; width:70pt" width="93" | 19
-| class="xl78" style="border-left:none; width:184pt" width="245" | WATCHDOG
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | Internal Watchdog
-| class="xl87" style="border-left:none; width:233pt" width="311" | Detect gpio signal<br/> 1.<font class="font10">$ echo 1 > /dev/watchdog</font><font class="font5">==> System will reboot after 120 sec.<br/> 2. </font><font class="font10">$ echo c > /proc/sysrq-trigger</font><font class="font5">==> System will reboot after 120 sec.</font>
-| class="xl76" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl83" style="border-top:none; border-left:none" |
-|- height="22" style="height:16.5pt"
-| class="xl89" height="44" rowspan="2" style="height:33.0pt; border-top:none; width:70pt" width="93" | 20
-| class="xl167" rowspan="2" style="border-top:none" | Button&nbsp;
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | Reset Button&nbsp;
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" | Reset system
-| class="xl76" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl83" style="border-top:none; border-left:none" |
-|- height="22" style="height:16.5pt"
-| class="xl79" height="22" style="height:16.5pt; border-top:none; border-left:none; width:337pt" width="449" | Recovery Button
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" | Recovery / Download
-| class="xl82" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl83" style="border-top:none; border-left:none" |
-|- height="22" style="height:16.5pt"
-| class="xl98" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 21
-| class="xl92" style="border-top:none; border-left:none; width:184pt" width="245" | Recovery & Rescue
-| class="xl93" style="border-top:none; border-left:none; width:337pt" width="449" | Downalod via USB
-| class="xl94" style="border-top:none; border-left:none" |
-| class="xl95" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" | HW<font class="font12">需要</font><font class="font11">re-work</font>
-|- height="22" style="height:16.5pt"
-| class="xl99" height="22" style="height:16.5pt; border-top:none" | 22
-| class="xl100" style="border-top:none; border-left:none" | Warm Reboot
-| class="xl101" style="border-top:none; border-left:none" | Warm Reboot
-| class="xl103" style="border-top:none; border-left:none" | $ reboot
-| class="xl102" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl112" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="526" style="height:394.5pt"
-| class="xl99" height="526" style="height:394.5pt; border-top:none" | 23
-| class="xl100" style="border-top:none; border-left:none" | TPM
-| class="xl101" style="border-top:none; border-left:none" |
-| class="xl140" style="border-top:none; border-left:none; width:233pt" width="311" | <font class="font15">方法</font><font class="font10">1:<br/> # ./tpm_test.bin</font><br/> <br/> <font class="font15">方法</font><font class="font10">2:<br/> (0) </font><font class="font15">安裝</font><font class="font10">TPM2 tools<br/> # apt-get install tpm2-tools<br/> (1)</font><font class="font15">產生</font><font class="font10">randon code<br/> # tpm2_getrandom --hex 20<br/> (2) </font><font class="font15">對指定檔案</font><font class="font10">msg.dat </font><font class="font15">加密</font><br/> <font class="font10"># tpm2_createprimary -C p -c platform_primary.ctx<br/> # tpm2_create -C platform_primary.ctx -G rsa2048 -u key.pub -r key.priv<br/> # tpm2_load -C platform_primary.ctx -u key.pub -r key.priv -c key.ctx<br/> # echo "my test" >msg.dat<br/> # tpm2_rsaencrypt -c key.ctx -o msg.enc msg.dat<br/> # cat msg.enc<br/> # tpm2_rsadecrypt -c key.ctx -o msg.ptext msg.enc<br/> # cat msg.ptext<br/> # cat msg.dat<br/> (3) </font><font class="font15">將資料儲存至</font><font class="font10">tpm </font><font class="font15">內存</font><br/> <font class="font10"># tpm2_nvdefine -Q 0x1500031 -C o -s 32 -a "ownerread&#124;policywrite&#124;ownerwrite"<br/> # echo "write_tpm_adv" >&nbsp; adv.data<br/> # tpm2_nvwrite -Q 0x1500031 -C o -i adv.data<br/> # tpm2_nvread -Q 0x1500031 -C o -s 32 -o read.data<br/> # cat read.data<br/> (4) </font><font class="font15">確認已經寫入儲存區域　</font><br/> <font class="font10"># tpm2_nvreadpublic > nv.out<br/> # cat nv.out</font>
-| class="xl102" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl112" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl99" height="22" style="height:16.5pt; border-top:none" | 24
-| class="xl100" style="border-top:none; border-left:none" | PWM Fan
-| class="xl101" style="border-top:none; border-left:none" | CN12
-| class="xl103" style="border-top:none; border-left:none" |
-| class="xl102" style="border-top:none; border-left:none" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" | HW<font class="font12">需要</font><font class="font11">re-work</font>
-|- height="22" style="height:16.5pt"
-| class="xl122" height="202" rowspan="6" style="border-bottom:.5pt solid black; height:151.5pt; border-top:none; width:70pt" width="93" | 25
-| class="xl171" rowspan="6" style="border-bottom:.5pt solid black; border-top:none; width:184pt" width="245" | LED Lights
-| class="xl147" style="border-top:none; border-left:none; width:337pt" width="449" | Power
-| class="xl95" style="border-top:none; border-left:none; width:233pt" width="311" | Power on the device
-| class="xl148" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl149" style="border-top:none; border-left:none; width:329pt" width="438" | Green light: Always On
-|- height="34" style="height:25.5pt"
-| class="xl147" height="34" style="height:25.5pt; border-left:none; width:337pt" width="449" | GPIO
-| class="xl95" style="border-top:none; border-left:none; width:233pt" width="311" | LED ON: echo 255 > /sys/class/leds/user/brightness<br/> LED OFF: echo 0 > /sys/class/leds/user/brightness
-| class="xl148" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="51" style="height:38.25pt"
-| class="xl93" height="51" style="height:38.25pt; border-left:none; width:337pt" width="449" | Ethernet Lan 1 - Link
-| class="xl95" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl148" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl149" style="border-top:none; border-left:none; width:329pt" width="438" | 1. 10M: Always Off<br/> 2. 100M: Always Off (<font class="font11">HW limitation</font><font class="font9">)<br/> 3. 1000M-Green light: Always On</font>
-|- height="22" style="height:16.5pt"
-| class="xl93" height="22" style="height:16.5pt; border-top:none; border-left:none; width:337pt" width="449" | Ethernet Lan 1 - Active
-| class="xl95" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl148" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl149" style="border-top:none; border-left:none; width:329pt" width="438" | Green light: Flashing On
-|- height="51" style="height:38.25pt"
-| class="xl93" height="51" style="height:38.25pt; border-top:none; border-left:none; width:337pt" width="449" | Ethernet Lan 2 - Link
-| class="xl95" style="border-top:none; border-left:none; width:233pt" width="311" | <font class="font7">需要燒</font><font class="font5">FW</font>
-| class="xl148" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl149" style="border-top:none; border-left:none; width:329pt" width="438" | 1. 10M: Always Off<br/> 2. 100M-Orange light: Always On<br/> 3. 1000M-Green light: Always On
-|- height="22" style="height:16.5pt"
-| class="xl93" height="22" style="height:16.5pt; border-top:none; border-left:none; width:337pt" width="449" | Ethernet Lan 2 - Active
-| class="xl95" style="border-top:none; border-left:none; width:233pt" width="311" | <font class="font7">需要燒</font><font class="font5">FW</font>
-| class="xl148" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl149" style="border-top:none; border-left:none; width:329pt" width="438" | Green light: Flashing On
-|- height="22" style="height:16.5pt"
-| class="xl85" height="22" style="height:16.5pt" | UIO-4030
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-|- height="22" style="height:16.5pt"
-| class="xl72" height="22" style="height:16.5pt; width:70pt" width="93" | No
-| class="xl72" style="width:184pt" width="245" | Module
-| class="xl72" style="width:337pt" width="449" | Test Item
-| class="xl72" style="width:233pt" width="311" | Test Steps
-| class="xl72" style="width:74pt" width="99" | Owner
-| class="xl72" style="width:95pt" width="126" | Result
-| class="xl72" style="width:329pt" width="438" | Result Comment
-|- height="119" style="height:89.25pt"
-| class="xl89" height="119" style="height:89.25pt; width:70pt" width="93" | 1
-| class="xl78" style="border-left:none; width:184pt" width="245" | RS485
-| class="xl79" style="border-left:none; width:337pt" width="449" | TI_SN65HVD75DR (COM_4)
-| class="xl80" style="border-left:none; width:233pt" width="311" | Test RS-485 with Adam-4520. Adam-4520 Pin Data- and Pin Data+ connect to UIO-4030 COM_4 Pin 1 and Pin 2.<br/> <font class="font10">$ stty -F /dev/ttyUSB2 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke<br/> $ cat /dev/ttyUSB2 &<br/> $ echo "Serial Test" > /dev/ttyUSB2</font>
-| class="xl76" style="border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl83" style="border-left:none" |
-|- height="51" style="height:38.25pt"
-| class="xl89" height="51" style="height:38.25pt; border-top:none; width:70pt" width="93" | 2
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | RS232
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | (COM_3)
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ stty -F /dev/ttyUSB0 -echo 115200<br/> $ cat /dev/ttyUSB0 &<br/> $ echo "Serial Port Test" > /dev/ttyUSB0
-| class="xl76" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" | /dev/ttyUSB0<br/> <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="22" style="height:16.5pt"
-| class="xl141" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 3
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | GPIO
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | (CN3_GPIO)
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl123" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl126" style="border-top:none; border-left:none" |
-|- height="22" style="height:16.5pt"
-| class="xl141" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 4
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | EEPROM
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | ST_M24C02-FMN6TP
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl85" height="22" style="height:16.5pt" | UIO-4032
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-|- height="22" style="height:16.5pt"
-| class="xl72" height="22" style="height:16.5pt; width:70pt" width="93" | No
-| class="xl72" style="width:184pt" width="245" | Module
-| class="xl72" style="width:337pt" width="449" | Test Item
-| class="xl72" style="width:233pt" width="311" | Test Steps
-| class="xl72" style="width:74pt" width="99" | Owner
-| class="xl72" style="width:95pt" width="126" |
-| class="xl72" style="width:329pt" width="438" | Result Comment
-|- height="51" style="height:38.25pt"
-| class="xl155" height="102" rowspan="2" style="border-bottom:.5pt solid black; height:76.5pt; width:70pt" width="93" | 1
-| class="xl160" rowspan="2" style="border-bottom:.5pt solid black; width:184pt" width="245" | RS232
-| class="xl79" style="border-left:none; width:337pt" width="449" | (COM_3)
-| class="xl107" style="border-left:none; width:233pt" width="311" | $ stty -F /dev/ttyUSB0 -echo 115200<br/> $ cat /dev/ttyUSB0 &<br/> $ echo "Serial Port Test" > /dev/ttyUSB0
-| class="xl80" style="border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-left:none; width:329pt" width="438" | /dev/ttyUSB0<br/> <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="51" style="height:38.25pt"
-| class="xl79" height="51" style="height:38.25pt; border-top:none; border-left:none; width:337pt" width="449" | (COM_4)
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ stty -F /dev/ttyUSB1 -echo 115200<br/> $ cat /dev/ttyUSB1 &<br/> $ echo "Serial Port Test" > /dev/ttyUSB1
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" | /dev/ttyUSB1<br/> <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 2
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | USB-A
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | (USB_1)
-| class="xl97" style="border-top:none; border-left:none; width:233pt" width="311" | $ lsusb -t
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 3
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" |
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | (USB_2)
-| class="xl97" style="border-top:none; border-left:none; width:233pt" width="311" | $ lsusb -t
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="34" style="height:25.5pt"
-| class="xl89" height="34" style="height:25.5pt; border-top:none; width:70pt" width="93" | 4
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | LAN
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | SMSC LAN7500-ABZJ
-| class="xl97" style="border-top:none; border-left:none; width:233pt" width="311" | $ ifconfig<br/> $ ping -I eth2 8.8.8.8
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 5
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | EEPROM
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | ST_M24C02-FMN6TP
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl85" height="22" style="height:16.5pt" | UIO-4034
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-|- height="22" style="height:16.5pt"
-| class="xl72" height="22" style="height:16.5pt; width:70pt" width="93" | No
-| class="xl72" style="width:184pt" width="245" | Module
-| class="xl72" style="width:337pt" width="449" | Test Item
-| class="xl72" style="width:233pt" width="311" | Test Steps
-| class="xl72" style="width:74pt" width="99" | Owner
-| class="xl72" style="width:95pt" width="126" |
-| class="xl72" style="width:329pt" width="438" | Result Comment
-|- height="51" style="height:38.25pt"
-| class="xl155" height="102" rowspan="2" style="border-bottom:.5pt solid black; height:76.5pt; width:70pt" width="93" | 1
-| class="xl160" rowspan="2" style="border-bottom:.5pt solid black; width:184pt" width="245" | RS232
-| class="xl79" style="border-left:none; width:337pt" width="449" | (COM_3)
-| class="xl107" style="border-left:none; width:233pt" width="311" | $ stty -F /dev/ttyUSB0 -echo 115200<br/> $ cat /dev/ttyUSB0 &<br/> $ echo "Serial Port Test" > /dev/ttyUSB0
-| class="xl80" style="border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-left:none; width:329pt" width="438" | /dev/ttyUSB0<br/> <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="51" style="height:38.25pt"
-| class="xl79" height="51" style="height:38.25pt; border-top:none; border-left:none; width:337pt" width="449" | (COM_4)
-| class="xl107" style="border-top:none; border-left:none; width:233pt" width="311" | $ stty -F /dev/ttyUSB1 -echo 115200<br/> $ cat /dev/ttyUSB1 &<br/> $ echo "Serial Port Test" > /dev/ttyUSB1
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" | /dev/ttyUSB1<br/> <font class="font11">HW</font><font class="font12">需要</font><font class="font11">re-work</font>
-|- height="119" style="height:89.25pt"
-| class="xl89" height="119" style="height:89.25pt; border-top:none; width:70pt" width="93" | 2
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | CAN
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | CAN
-| class="xl97" style="border-top:none; border-left:none; width:233pt" width="311" | $ modprobe can<br/> $ modprobe can-dev<br/> $ modprobe mttcan<br/> $ ip link set can0 up type can bitrate 125000<br/> $ ifconfig can0 up<br/> $ candump can0 &<br/> $ cansend can0 1F334455#1122334455667788
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 3
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | EEPROM
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | ST_M24C02-FMN6TP
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl85" height="22" style="height:16.5pt" | UIO-4036
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-|- height="22" style="height:16.5pt"
-| class="xl72" height="22" style="height:16.5pt; width:70pt" width="93" | No
-| class="xl72" style="width:184pt" width="245" | Module
-| class="xl72" style="width:337pt" width="449" | Test Item
-| class="xl72" style="width:233pt" width="311" | Test Steps
-| class="xl72" style="width:74pt" width="99" | Owner
-| class="xl72" style="width:95pt" width="126" |
-| class="xl72" style="width:329pt" width="438" | Result Comment
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; width:70pt" width="93" | 1
-| class="xl78" style="border-left:none; width:184pt" width="245" | LAN
-| class="xl79" style="border-left:none; width:337pt" width="449" | SMSC LAN7500-ABZJ
-| class="xl80" style="border-left:none; width:233pt" width="311" |
-| class="xl80" style="border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 2
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | LAN Switch
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | Realtek RTL8368MBI-CG
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 3
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | EEPROM
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | ST_M24C02-FMN6TP
-| class="xl80" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl85" height="22" style="height:16.5pt" | UIO-4038
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-|- height="22" style="height:16.5pt"
-| class="xl72" height="22" style="height:16.5pt; width:70pt" width="93" | No
-| class="xl72" style="width:184pt" width="245" | Module
-| class="xl72" style="width:337pt" width="449" | Test Item
-| class="xl72" style="width:233pt" width="311" | Test Steps
-| class="xl72" style="width:74pt" width="99" | Owner
-| class="xl72" style="width:95pt" width="126" |
-| class="xl72" style="width:329pt" width="438" | Result Comment
-|- height="22" style="height:16.5pt"
-| class="xl121" height="22" style="height:16.5pt; width:70pt" width="93" | 1
-| class="xl116" style="border-left:none; width:184pt" width="245" | WAN
-| class="xl117" style="border-left:none" |
-| class="xl115" style="border-left:none; width:233pt" width="311" |
-| class="xl115" style="border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl122" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 2
-| class="xl119" style="border-top:none; border-left:none; width:184pt" width="245" | LAN1
-| class="xl117" style="border-top:none; border-left:none" |
-| class="xl120" style="border-top:none; border-left:none; width:233pt" width="311" |
-| class="xl115" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl122" height="22" style="height:16.5pt; width:70pt" width="93" | 3
-| class="xl119" style="border-left:none; width:184pt" width="245" | LAN2
-| class="xl117" style="border-top:none; border-left:none" |
-| class="xl120" style="border-left:none; width:233pt" width="311" |
-| class="xl115" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl122" height="22" style="height:16.5pt; width:70pt" width="93" | 4
-| class="xl119" style="border-left:none; width:184pt" width="245" | LAN3
-| class="xl130" style="border-top:none; border-left:none" |
-| class="xl131" style="border-left:none; width:233pt" width="311" |
-| class="xl132" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl122" height="22" style="height:16.5pt; width:70pt" width="93" | 5
-| class="xl119" style="border-left:none; width:184pt" width="245" | LAN4
-| class="xl117" style="border-top:none; border-left:none" |
-| class="xl120" style="border-left:none; width:233pt" width="311" |
-| class="xl115" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl122" height="22" style="height:16.5pt; width:70pt" width="93" | 6
-| class="xl119" style="border-left:none; width:184pt" width="245" | Debug UART
-| class="xl117" style="border-top:none; border-left:none" |
-| class="xl120" style="border-left:none; width:233pt" width="311" |
-| class="xl115" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl122" height="22" style="height:16.5pt; width:70pt" width="93" | 7
-| class="xl119" style="border-left:none; width:184pt" width="245" | USB
-| class="xl117" style="border-top:none; border-left:none" |
-| align="left" | [[File:|1x9px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf> <x:autopict></x:autopict></x:sizewithcells></x:clientdata> <span style="position:absolute; margin-left:287px; margin-top:0px; width:2px"><span style="z-index:24"><span style="height:13px">[[File:|2x13px]]</span></span></span>
-{| style="border:none"
-|-
-| class="xl118" height="22" style="border-left:none; width:233pt" width="311" | <span style="height:16.5pt">USB disk write/read/verify pattern</span>
-|}
-| class="xl115" style="border-top:none; border-left:none; width:74pt" width="99" |
+| style="width:74.0pt; border:solid windowtext 1.0pt; border-left:none; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="99" | &nbsp;
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| style="width:95.0pt; border:solid windowtext 1.0pt; border-left:none; background:#00b050" width="127" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-family:" verdana",sans-serif"=""><span style="color:white">PASS</span></span>'''</span></p>
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
+| style="width:329.0pt; border:solid windowtext 1.0pt; border-left:none; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="439" | &nbsp;
-|- height="34" style="height:25.5pt"
+|- style="height:16.5pt"
-| class="xl122" height="34" style="height:25.5pt; width:70pt" width="93" | 8
+| style="width:70.0pt; border:solid windowtext 1.0pt; border-top:none" width="93" |
-| class="xl119" style="border-left:none; width:184pt" width="245" | Restore Button
+<span style="height:16.5pt"><span lang="EN-US" style="font-family:" verdana",sans-serif"="">2</span></span>
-| class="xl117" style="border-top:none; border-left:none" |
-| class="xl120" style="border-left:none; width:233pt" width="311" | Press the reset button about 10 seconds, the system will reset and reboot. The system will reset to default
-| class="xl115" style="border-top:none; border-left:none; width:74pt" width="99" |
-| class="xl91" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl80" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl121" height="22" style="height:16.5pt; width:70pt" width="93" | 9
-| class="xl116" style="border-left:none; width:184pt" width="245" | EEPROM
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | ST_M24C02-FMN6TP
-| class="xl80" height="22" style="border-left:none; width:233pt" width="311" | [[File:|1x16px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf> <x:autopict></x:autopict></x:sizewithcells></x:clientdata> [[File:|1x16px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf> <x:autopict></x:autopict></x:sizewithcells></x:clientdata>
-{| style="height:16.5pt; border:undefined"
-|-
-| height="0" width="287" | &nbsp;
-|-
-| &nbsp;
-| <span style="height:16.5pt">[[File:|2x13px]]</span>
-| width="22" | &nbsp;
-|-
-| height="9" | &nbsp;
-|}
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
+| style="width:184.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white" width="245" |
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+<span style="height:16.5pt">'''<span lang="EN-US" style="font-family:" verdana",sans-serif"="">EEPROM</span>'''</span>
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|- height="22" style="height:16.5pt"
-| class="xl85" height="22" style="height:16.5pt" | UIO-4040
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-| &nbsp;
-|- height="22" style="height:16.5pt"
-| class="xl72" height="22" style="height:16.5pt; width:70pt" width="93" | No
-| class="xl72" style="width:184pt" width="245" | Module
-| class="xl72" style="width:337pt" width="449" | Test Item
-| class="xl72" style="width:233pt" width="311" | Test Steps
-| class="xl72" style="width:74pt" width="99" | Owner
-| class="xl72" style="width:95pt" width="126" |
-| class="xl72" style="width:329pt" width="438" | Result Comment
-|- height="22" style="height:16.5pt"
-| class="xl89" height="22" style="height:16.5pt; width:70pt" width="93" | 1
-| class="xl78" style="border-left:none; width:184pt" width="245" | SSD
-| class="xl79" style="border-left:none; width:337pt" width="449" | SMSC LAN7500-ABZJ
-| align="left" | [[File:|1x9px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf> <x:autopict></x:autopict></x:sizewithcells></x:clientdata> <span style="position:absolute; margin-left:287px; margin-top:0px; width:2px"><span style="z-index:9"><span style="height:13px">[[File:|2x13px]]</span></span></span>
-{| style="border:none"
-|-
-| class="xl133" height="22" style="border-left:none; width:233pt" width="311" | <span style="height:16.5pt">SSD disk write/read/verify pattern</span>
-|}
-| class="xl80" style="border-left:none; width:74pt" width="99" |
+| style="width:337.8pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white" width="450" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt"><span lang="EN-US" style="font-size:10.0pt"><span style="font-family:" verdana",sans-serif"="">ST_M24C02-FMN6TP</span></span></span></p>
-| class="xl91" style="border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Cambria; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
+| style="width:233.8pt; border:solid windowtext 1.0pt; border-left:none; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="351" | &nbsp;
-| class="xl80" style="border-left:none; width:329pt" width="438" |
+| style="width:74.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="99" | &nbsp;
-|- height="22" style="height:16.5pt"
+| style="width:95.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:#00b050" width="127" | <p align="center" style="text-align:center; padding:.75pt .75pt .75pt .75pt"><span style="height:16.5pt">'''<span lang="EN-US" style="font-family:" verdana",sans-serif"=""><span style="color:white">PASS</span></span>'''</span></p>
-| class="xl89" height="22" style="height:16.5pt; border-top:none; width:70pt" width="93" | 2
+| style="width:329.0pt; border-top:none; border-left:none; border-bottom:solid windowtext 1.0pt; border-right:solid windowtext 1.0pt; background:white; padding:.75pt .75pt .75pt .75pt; height:16.5pt" width="439" | &nbsp;
-| class="xl78" style="border-top:none; border-left:none; width:184pt" width="245" | EEPROM
-| class="xl79" style="border-top:none; border-left:none; width:337pt" width="449" | ST_M24C02-FMN6TP
-| class="xl80" height="22" style="border-left:none; width:233pt" width="311" | [[File:|1x16px]] <x:clientdata objecttype="Pict"><x:sizewithcells><x:cf>Bitmap</x:cf> <x:autopict></x:autopict></x:sizewithcells></x:clientdata>
-{| style="height:16.5pt; border:undefined"
-|-
-| height="0" width="287" | &nbsp;
-|-
-| &nbsp;
-| <span style="height:16.5pt">[[File:|2x13px]]</span>
-| width="22" | &nbsp;
-|-
-| height="9" | &nbsp;
 |}
-| class="xl80" style="border-top:none; border-left:none; width:74pt" width="99" |
+&nbsp;
-| class="xl96" style="border-top:none; border-left:none; width:95pt; font-size:12.0pt; color:white; font-weight:700; text-decoration:none; text-underline-style:none; text-line-through:none; font-family:Calibri; border:.5pt solid windowtext; background:#00b050" width="126" | PASS
-| class="xl104" style="border-top:none; border-left:none; width:329pt" width="438" |
-|}