Difference between revisions of "How to Debug for ROM-5780"
From ESS-WIKI
Xingxing.li (talk | contribs) (Created page with " === '''Debug Port Connection'''<br/> 1. Connect the debug port cable (1701100300) to the debug port (COM3) on<br/> ROM-DB5901.<br/> 2. Connect it to your PC using the RS-232...") |
Xingxing.li (talk | contribs) |
||
Line 1: | Line 1: | ||
− | |||
− | |||
== '''USB2UART Bridge''' == | == '''USB2UART Bridge''' == | ||
Line 9: | Line 7: | ||
*[http://www.prolific.com.tw/US/ShowProduct.aspx?pcid=41 PL2303] | *[http://www.prolific.com.tw/US/ShowProduct.aspx?pcid=41 PL2303] | ||
*[https://sparks.gogo.co.nz/ch340.html CH340] | *[https://sparks.gogo.co.nz/ch340.html CH340] | ||
+ | |||
+ | == '''Debug Port Connection''' == | ||
+ | |||
+ | 1. Connect the debug port cable (1701100300) to the debug port (COM3) on<br/> ROM-DB5901.<br/> 2. Connect it to your PC using the RS-232 Cable (1700019474). | ||
== '''UART parameter''' == | == '''UART parameter''' == |
Latest revision as of 02:53, 1 June 2023
USB2UART Bridge
There are plenty types of usb to uart bridge in the market . Most of them use the following chip :
Debug Port Connection
1. Connect the debug port cable (1701100300) to the debug port (COM3) on
ROM-DB5901.
2. Connect it to your PC using the RS-232 Cable (1700019474).
UART parameter
- BaudRate:115200
- DataBits :8
- StopBits :1
- Parity :None
- FlowControl:None or XON/XOFF
1. Connect ROM-5780 with your PC using a serial cable.
2. Open HyperTerminal on your Windows PC, and select the settings demonstrated
in the photo below.
Debug on windows
Install usb2uart adapter's driver. Connect adapter to PC , you will find COM port like :
Putty is very populate tool on Windows. Download putty here.
Run PUTTY.exe, select Connection type of "Serial" , input COM port found in Device Manager.
Set Parameter like :
Then Click "Open" to start debug console.