Difference between revisions of "IoTGateway/Features/Android/Peripheral"
From ESS-WIKI
(→To Update system) |
|||
| Line 33: | Line 33: | ||
#:[[File:imx6ABV1_settings_ethernet_config_dhcp.png||400px]][[File:imx6ABV1_settings_ethernet_config_static.png|400px]] | #:[[File:imx6ABV1_settings_ethernet_config_dhcp.png||400px]][[File:imx6ABV1_settings_ethernet_config_static.png|400px]] | ||
| − | == | + | ==Update System== |
#Refer to 1.4.6 to build OTA package. | #Refer to 1.4.6 to build OTA package. | ||
#Plug SD card that contains OTA package(update.zip) into SD slot. | #Plug SD card that contains OTA package(update.zip) into SD slot. | ||
Revision as of 10:45, 18 August 2016
Serial Port
- Click "Serial Port"
- Click "Setup"
- Click "Device" , and choose the used device(e.g. ttymxc1)
- Click "Baud rate" , and choose the used baudrate(e.g. 115200)
Wi-Fi
- Click "Settings"
- Turn Wi-Fi on
- Choose ESSID (e.g. ESSD Testing )
- Input correct password
- Wi-Fi Authenticating/Connecting/Obtaining IP address
- Wi-Fi connected
Ethernet
- Click "Settings" / "Ethernet configuration" , then Turn on Ethernet
- Click "Ethernet configuration"
- Choose Connection Type (DHCP or Static IP)
Update System
- Refer to 1.4.6 to build OTA package.
- Plug SD card that contains OTA package(update.zip) into SD slot.
- Click "Settings" / "About tablet" / "Addition system updates" :
- Wait for one moment, system will reboot for updating
- It will take some time to update.
Watchdog
Example