|
|
| Line 46: |
Line 46: |
| | |} | | |} |
| | | | |
| − | = RSB-3720 = | + | = RSB-3430 = |
| | | | |
| − | == '''RSB-3720 Testing method (RSB-3720 測試方法 )''' ==
| + | ''' Note: RS-232: /dev/ttymxc2 <br/> GPIO : need to connect loopback.<br/> RS-485: pin1 data- & pin2 data+ (ttyUSB0)''' |
| | | | |
| − | '''RS-232(COM3):''' | + | '''RS-232''' |
| − | <pre># stty -F /dev/ttymxc1 -echo -onlcr 115200 | + | <pre>$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts |
| − | # cat /dev/ttymxc1 &
| + | $ cat /dev/ttymxc2 & |
| − | # echo "Serial Port Test" /dev/ttymxc1</pre>
| + | $ echo "Serial Port Test" > /dev/ttymxc2</pre> |
| | | | |
| − | '''RS-485''' | + | '''RS485 <br/> <br/> Test RS-485 with Adam-4520.''' |
| | + | <pre>$ stty -F /dev/ttyUSB0 115200 |
| | + | $ echo "Serial Test" > /dev/ttyUSB0</pre> |
| | | | |
| − | '''Note: ''' | + | '''GPIO ''' |
| − | | + | <pre>[EXTENSION I/O B] |
| − | '''Adam-4520<br/> Data- : Pin1<br/> Data+ : Pin2<br/> Remember to set up RS-485 before test.'''
| + | pin#5: gpio 121, pin#6: gpio 122 |
| − | <pre># stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke | + | pin#7: gpio 123, pin#8: gpio 124 |
| − | # cat /dev/ttyUSB0 &
| + | pin#9: gpio 125, pin#10: gpio 126 |
| − | # echo "Serial Test" > /dev/ttyUSB0</pre>
| + | pin#11: gpio 127, pin#12: 133</pre> |
| − | | |
| − | '''GPIO'''
| |
| − | | |
| − | Note:<br/> input pin#5: gpio 504(DB9-1)<br/> output pin#6: gpio 505(DB9-6)<br/> input pin#7: gpio 506(DB9-2)<br/> output pin#8: gpio 507(DB9-7)<br/> input pin#9: gpio 508(DB9-3)<br/> output pin#10: gpio 509(DB9-8)<br/> input pin#11: gpio 139(DB9-4)<br/> output pin#12: gpio 138(DB9-9)
| |
| − | <pre># echo 504 > /sys/class/gpio/export
| |
| − | # echo 505 > /sys/class/gpio/export
| |
| − | # echo out > /sys/class/gpio/gpio2/direction
| |
| − | # echo in > /sys/class/gpio/gpio1/direction
| |
| − | # cat /sys/class/gpio/gpio1/value
| |
| − | # echo 1 > /sys/class/gpio/gpio2/value
| |
| − | # cat /sys/class/gpio/gpio1/value
| |
| − | </pre> | |
| − | | |
| − | [[File:RSB-3720 GPIOp1.png|RTENOTITLE]]
| |
| − | <pre># echo 506 > /sys/class/gpio/export
| |
| − | # echo 507 > /sys/class/gpio/export
| |
| − | # echo out > /sys/class/gpio/gpio4/direction
| |
| − | # echo in > /sys/class/gpio/gpio3/direction
| |
| − | # cat /sys/class/gpio/gpio3/value
| |
| − | # echo 1 > /sys/class/gpio/gpio4/value
| |
| − | # cat /sys/class/gpio/gpio3/value</pre>
| |
| − | | |
| − | [[File:RSB-3720 GPIOp2.png|RTENOTITLE]]
| |
| − | <pre># echo 508 > /sys/class/gpio/export
| |
| − | # echo 509 > /sys/class/gpio/export
| |
| − | # echo out > /sys/class/gpio/gpio6/direction
| |
| − | # echo in > /sys/class/gpio/gpio5/direction
| |
| − | # cat /sys/class/gpio/gpio5/value
| |
| − | # echo 1 > /sys/class/gpio/gpio6/value
| |
| − | # cat /sys/class/gpio/gpio5/value
| |
| − | </pre>
| |
| − | | |
| − | [[File:RSB-3720 GPIOp3.png|RTENOTITLE]]
| |
| − | <pre># echo 139 > /sys/class/gpio/export
| |
| − | # echo 138 > /sys/class/gpio/export
| |
| − | # echo out > /sys/class/gpio/gpio8/direction
| |
| − | # echo in > /sys/class/gpio/gpio7/direction
| |
| − | # cat /sys/class/gpio/gpio7/value
| |
| − | # echo 1 > /sys/class/gpio/gpio8/value
| |
| − | # cat /sys/class/gpio/gpio7/value</pre>
| |
| − | | |
| − | [[File:RSB-3720 GPIOp4.png|RTENOTITLE]]
| |
| − | | |
| − | == <br/> <br/> Test<!-- == '''接口布局和尺寸(Layout and Sizes)''' --><!-- '''[[File:UIO-4030 photo 2021-10-27 141551.jpg|RTENOTITLE]]'''--><!-- [[File:UIO-4030 photo1 2021-10-27 141634.jpg|RTENOTITLE]]--> <!--[[File:UIO-4030 photo3 2021-10-27 141714.jpg|RTENOTITLE]]--> ==
| |
| | | | |
| | = RSB-3430 = | | = RSB-3430 = |
