Difference between revisions of "ROM-6881 How to use WIFI&BT"

Revision as of 02:12, 4 January 2024

Default support ADVANTECH wifi5 module: AIW-154BN

SOM-DB2510 Jumper Setting

1. Jumper the J15-J21 jumper of the soleplate SOM-DB2510 to 1-2

2. Set the W_DISABLE_SEL1 of SOM-DB2510 on the baseboard to 1-OFF and 2-ON

3. Build a test environment

1. Click the Wi-Fi icon in the top right corner of the screen and select a Wi-Fi connection (for example, Advantech for guest).

2. Enter the Wi-Fi password to connect to the device.

3. If the password is correct, the device will connect quickly.

After connection, Wi-Fi will create a net point “wlan0”.

# ping -I wlan0 www.advantech.com

@@ Line 1: / Line 1: @@
-== Configure WIFI ==
+== Configure WIFI &BT ==
 Default support ADVANTECH wifi5 module: '''AIW-154BN'''
+[[File:AIW-154BN.png|200x200px]]
+SOM-DB2510 Jumper Setting
+. Jumper the J15-J21 jumper of the soleplate SOM-DB2510 to 1-2
+[[File:SOM-DB2510 SDIO Select.png|500x300px]]
+.&nbsp;Set the W_DISABLE_SEL1 of SOM-DB2510 on the baseboard to 1-OFF and 2-ON
+.&nbsp;Build a test environment
+[[File:AIW-154BN Setting.png|500x300px]]
+# Please enable the Bluetooth function of Huawei Mate 50pro
+== WIFI ==
 . Click the Wi-Fi icon in the top right corner of the screen and select a Wi-Fi connection&nbsp;(for example, Advantech for guest).
@@ Line 20: / Line 38: @@
 After connection, Wi-Fi will create a net point “wlan0”.
 <pre># ping -I wlan0 www.advantech.com</pre>
+== BT ==
+&nbsp;