Difference between revisions of "ROM-6881 How to configurate Static IP"

From ESS-WIKI
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
== Ethernet ==
 
== Ethernet ==
  
−
ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example.
+
ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example.
  
−
# The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1.
+
#The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1.  
  
 
== Configure to Static IP ==
 
== Configure to Static IP ==
Line 10: Line 10:
 
1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.
 
1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.
  
−
 
+
[[File:ROM-6881 Eethernet.png|500x300px|ROM-6881 Eethernet.png]]
  
−
'''STEP 1 : '''
+
2. Double-click “Wired Connection 1” to configure it.
  
−
Right-click network icon, then left-click "Edit Connections..."
+
[[File:ROM-6881 Ethernet wired connection.png|500x300px|ROM-6881 Ethernet wired connection.png]]
  
−
[[File:RK ALL Static IP 001.png|RTENOTITLE]]
+
== Configure to DHCP ==
  
−
'''STEP 2 : '''
+
1. Click “Applications” -> “Settings -> “Advanced Network Configration”.
  
−
Double-click "Wired connection 1"
+
[[File:ROM-6881 Network.png|500x300px|ROM-6881 Network.png]]
  
−
[[File:RK ALL Static IP 002.png|600px|RK ALL Static IP 002.png]]
+
2. Double-click “Wired Connection 1” to configure it.
  
−
'''STEP 3 : '''
+
[[File:ROM-6881 Ethernet IPV4.png|500x300px|ROM-6881 Ethernet IPV4.png]]
  
−
Left-click "IPv4 Settings"
+
== Ethernet Test ==
  
−
[[File:RK ALL Static IP 003.png|600px|RK ALL Static IP 003.png]]
+
After connection, Ethernet will create a net point “eth0” and “eth1”.
−
 
+
<pre># #---- Test eth0 ----# #
−
*Choose "Manual"
+
# ping –I eth0 www.advantech.com
−
*Left-click "Add" Button and input Address 、Netmask and Gateway
+
# #---- Test eth1 ----# #
−
*Left-click "Save" Button
+
# ping –I eth1 www.advantech.com
 +
</pre>

Latest revision as of 02:30, 5 January 2024

Ethernet

ROM-6881 supports two Ethernet ports : eth0/eth1. Both ports are using “DHCP”mode by default. The following configurations and tests are taking eth0 for example.

  1. The LAN signal of the core board ROM-6881 is connected to the SOM-DB2510 interface of the mainboard as LAN0 LAN1.

Configure to Static IP

1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.

ROM-6881 Eethernet.png

2. Double-click “Wired Connection 1” to configure it.

ROM-6881 Ethernet wired connection.png

Configure to DHCP

1. Click “Applications” -> “Settings -> “Advanced Network Configration”.

ROM-6881 Network.png

2. Double-click “Wired Connection 1” to configure it.

ROM-6881 Ethernet IPV4.png

Ethernet Test

After connection, Ethernet will create a net point “eth0” and “eth1”. 

# #---- Test eth0 ----# #
# ping –I eth0 www.advantech.com
# #---- Test eth1 ----# #
# ping –I eth1 www.advantech.com
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-6881_How_to_configurate_Static_IP&oldid=33369"