Difference between revisions of "RSB-4680 Usering bootup sd disk made by SDDiskTool"
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 14: | Line 14: | ||
If there is no error, you will find update.img in AndroidTool/rockdev/ . | If there is no error, you will find update.img in AndroidTool/rockdev/ . | ||
| − | === '''Generate SD card''' | + | === '''Generate SD card''' === |
| − | Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool . | + | === Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool . === |
Step 2 : Choose SD card . | Step 2 : Choose SD card . | ||
| − | + | [[File:Choosesd.jpg]] | |
Step 3 : Choose update.img . | Step 3 : Choose update.img . | ||
| − | + | [[File:Chooseupdateimage.jpg]] | |
Step 4 : Create SD card . | Step 4 : Create SD card . | ||
| − | + | [[File:Create sd.jpg]] | |
'''NOTE : ''' | '''NOTE : ''' | ||
| Line 42: | Line 42: | ||
Step 3 : When upgrade is finish, you will get "Doing Actions succeeded,please remove sdcard......" on screen or debug console . | Step 3 : When upgrade is finish, you will get "Doing Actions succeeded,please remove sdcard......" on screen or debug console . | ||
| − | + | [[File:RK3288 Debian9 sdupdate screen information.jpg]] | |
Step 4 : Remove SD card， the device will auto reboot . | Step 4 : Remove SD card， the device will auto reboot . | ||
Revision as of 04:07, 16 January 2024
Contents
Update image through SD-Card
Download SD DiskTool
https://github.com/ADVANTECH-Rockchip/linux_tools/tree/rk3288_linux_v2.0
Step 1 : Put images to AndroidTool/rockdev/image, Make sure path is correct.
Step 2 : Double click rk3328-mkupdate.bat in AndroidTool/rockdev/ .
If there is no error, you will find update.img in AndroidTool/rockdev/ .
Generate SD card
Step 1 : Insert SD card to PC， Double click SD_Firmware_Tool.exe in SDDiskTool .
Step 2 : Choose SD card .
Step 3 : Choose update.img .
Step 4 : Create SD card .
NOTE :
The capacity of SD card is at least 4GB.
Upgrade image from SD card[edit]
Step 1 : Insert SD card to device .
Step 2 : Power up or reboot device， it will boot from SD card to auto upgrade images .
Step 3 : When upgrade is finish, you will get "Doing Actions succeeded,please remove sdcard......" on screen or debug console .
Step 4 : Remove SD card， the device will auto reboot .