Difference between revisions of "HBW test/test"

From ESS-WIKI
Jump to: navigation, search
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
{{DISPLAYTITLE:How to add EDID for LVDS panel}}
+
{{DISPLAYTITLE:How to update kernel for hardware enablement}}
  
−
== Prerequisites ==
+
== Hardware Enablement ==
−
* PTN3460 Programming Guide
+
*RS-485
−
* EDID config (128 bytes)
+
*TPM
−
* i2c-tools installed
+
*external watchdog
 +
*ethernet switch (UIO-4036)
 +
 
 +
== Install Procedures ==
 +
=== fetch the following packages ===
 +
kernel (get these files from your contact window)
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
sudo apt update
+
# linux-buildinfo-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
−
sudo apt install i2c-tools
+
# linux-headers-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
 +
# linux-image-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
 +
# linux-modules-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
 +
# linux-mtk-headers-5.15.0-1029_5.15.0-1029.33advantech1_all.deb
 
</syntaxhighlight>
 
</syntaxhighlight>
−
 
+
dependency
−
== Step-by-step procedures ==
 
−
(use EDID 6 and panel G070VW01V0 as example)
 
−
=== On Ubuntu ===
 
−
create the setup script from EDID config
 
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
EDIDNEW=6
+
wget https://ftp.fau.de/ubuntu-ports/pool/main/o/openssl/libssl1.1_1.1.1-1ubuntu2.1~18.04.23_arm64.deb
−
EDIDBIN=g070vw01v0.bin
 
−
SCRIPT=~/set_edid_${EDIDNEW}.sh
 
−
 
 
−
REG81=$(printf "0x%02x" 0) # Please refer to the PTN3460 Programming Guide to set correct value
 
−
REG84=$(printf "0x%02x" $((2*EDIDNEW + 1)))
 
−
REG85=$(printf "0x%02x" $EDIDNEW)
 
−
echo -e "REG81:$REG81\nREG84:$REG84\nREG85:$REG85\n"
 
−
 
 
−
cat << EOT > $SCRIPT
 
−
#!/bin/bash
 
−
i2cset -f -y 2 0x20 0x85 $REG85 b
 
−
 
 
−
$(
 
−
xxd -c 16 -ps $EDIDBIN |
 
−
sed "s/../0x& /g; s/ *$//" |
 
−
for ADDR in `seq 0x00 0x10 0x70`; do
 
−
  read
 
−
  echo i2cset -f -y 2 0x20 `printf "0x%02x" $ADDR` $REPLY i
 
−
done
 
−
)
 
−
 
 
−
i2cset -f -y 2 0x20 0x81 $REG81 b
 
−
i2cset -f -y 2 0x20 0x84 $REG84 b
 
−
i2cset -f -y 2 0x20 0xe8 0x01 0x78 0x45 0x56 i
 
−
EOT
 
−
 
 
−
chmod +x $SCRIPT
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
−
run the script and reboot
+
=== install all fetched packages ===
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
sudo $SCRIPT
+
sudo dpkg -i *deb
 
sudo reboot
 
sudo reboot
−
</syntaxhighlight>
 
−
 
−
=== On U-Boot ===
 
−
Press any key to stop auto boot, and set matched device tree overlay (dtbo)
 
−
* Multi-display (HDMI + LVDS)
 
−
: The LVDS is always major display that has nothing to do with the specified order.
 
−
<syntaxhighlight lang="bash">
 
−
setenv DISPLAY hdmi.dtbo lvds6.dtbo
 
−
saveenv
 
−
reset
 
−
</syntaxhighlight>
 
−
 
−
* LVDS only
 
−
<syntaxhighlight lang="bash">
 
−
setenv DISPLAY lvds6.dtbo
 
−
saveenv
 
−
reset
 
−
</syntaxhighlight>
 
−
 
−
== Appendix ==
 
−
=== fetch the EDID config ===
 
−
(use the pre-set EDID 2, panel G070VW01V0, as example)
 
−
<syntaxhighlight lang="bash">
 
−
EDID=2
 
−
EDIDBIN=g070vw01v0.bin
 
−
 
−
sudo i2cset -f -y 2 0x20 0x85 $EDID b
 
−
 
−
for DA in `seq 0 0x10 0x70`; do
 
−
  sudo i2cget -f -y 2 0x20 $DA i 0x10
 
−
done | xxd -r -p  > $EDIDBIN
 
 
</syntaxhighlight>
 
</syntaxhighlight>

Latest revision as of 10:03, 26 January 2024


Hardware Enablement

  • RS-485
  • TPM
  • external watchdog
  • ethernet switch (UIO-4036)

Install Procedures

fetch the following packages

kernel (get these files from your contact window) 

# linux-buildinfo-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
# linux-headers-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
# linux-image-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
# linux-modules-5.15.0-1029-mtk_5.15.0-1029.33advantech1_arm64.deb
# linux-mtk-headers-5.15.0-1029_5.15.0-1029.33advantech1_all.deb

dependency 

wget https://ftp.fau.de/ubuntu-ports/pool/main/o/openssl/libssl1.1_1.1.1-1ubuntu2.1~18.04.23_arm64.deb

install all fetched packages

sudo dpkg -i *deb
sudo reboot
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=HBW_test/test&oldid=33697"