Difference between revisions of "UIO-4032"

From ESS-WIKI
Jump to: navigation, search
Line 127: Line 127:
 
[[File:UIO-4032 rearIO ethernet.png|RTENOTITLE]]
 
[[File:UIO-4032 rearIO ethernet.png|RTENOTITLE]]
  
−
 
+
= RSB-3430 =
 +
 
 +
'''RS-232 x2&nbsp;:&nbsp;<br/> &nbsp;Note:ttymxc2 –COM_3 ttymxc3-COM_4'''
 +
<pre>'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
 +
$ cat /dev/ttymxc2 &
 +
$ echo "Serial Port Test" > /dev/ttymxc2</pre>
 +
 
 +
'''USB'''&nbsp;
 +
<pre>Insert a USB disk
 +
 
 +
usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
 +
usb-storage 1-1.2:1.0: USB Mass Storage device detected
 +
scsi2&nbsp;: usb-storage 1-1.2:1.0
 +
scsi 2:0:0:0: Direct-Access    Generic- SD/MMC          1.00 PQ: 0 ANSI: 0 CCS
 +
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
 +
sd 2:0:0:0: [sda] Write Protect is off
 +
sd 2:0:0:0: [sda] No Caching mode page found
 +
sd 2:0:0:0: [sda] Assuming drive cache: write through
 +
sd 2:0:0:0: [sda] No Caching mode page found
 +
sd 2:0:0:0: [sda] Assuming drive cache: write through
 +
sda: sda1
 +
sd 2:0:0:0: [sda] No Caching mode page found
 +
sd 2:0:0:0: [sda] Assuming drive cache: write through
 +
sd 2:0:0:0: [sda] Attached SCSI removable disk</pre>
 +
 
 +
'''LAN'''
 +
<pre>ifconfig eth1 8.8.8.8 </pre>
 +
 
 +
= RSB-3720 =
 +
 
 +
COM Port&nbsp;<br/> Rear IO – RS-232 x 2<br/> USB x 2<br/> Ethernet x 1<br/> Note:<br/> ttymxc1 – COM3<br/> ttymxc3 – COM4
 +
 
 +
'''RS-232(COM3):'''
 +
<pre># stty -F /dev/ttymxc1 -echo -onlcr 115200
 +
# cat /dev/ttymxc1 &
 +
# echo "Serial Port Test" > /dev/ttymxc1</pre>
 +
 
 +
[[File:RSB-3720 4032 232 pic1.png|RTENOTITLE]]
 +
 
 +
'''RS-232(COM3):'''
 +
<pre># stty -F /dev/ttymxc3 -echo -onlcr 115200
 +
# cat /dev/ttymxc3 &
 +
# echo "Serial Port Test" > /dev/ttymxc3</pre>
 +
 
 +
[[File:RSB-3720 4032 232 pic2.png|RTENOTITLE]]
 +
 
 +
'''USB&nbsp;&nbsp;'''
 +
<pre>USB3.0 HUB+USB Keyeboard&Mouse
 +
USB3.0 driver data copy compare</pre>
 +
 
 +
'''Ethernet'''&nbsp;
 +
 
 +
[[File:RSB-3720 4032 ethernet pic1.png|RTENOTITLE]]
 +
 
 +
[[File:RSB-3720 4032 ethernet pic2.png|RTENOTITLE]]
 +
 
 +
= RSB-3730 =
 +
 
 +
<!--== '''接口布局和尺寸(Layout and Sizes)''' == --><!--'''[[File:UIO-4032 photo1 2021-10-27 143242.jpg|RTENOTITLE]]''' --><!--&#160;
 +
 
 +
<!--'''[[File:UIO-4032 photo2 2021-10-27 143326.jpg|RTENOTITLE]]''' --><!--&#160;--><!--'''[[File:UIO-4032 photo3 2021-10-27 143358.jpg|RTENOTITLE]]'''-->
 +
 
 +
'''<headertabs></headertabs>Rear IO – RS-232 x2 (ttymxc1 & ttymxc3)<br/> RS-232(4032_COM3):'''
 +
<pre># stty -F /dev/ttymxc0 -echo -onlcr 115200
 +
# cat /dev/ttymxc1 &
 +
# echo "Serial Port Test" > /dev/ttymxc0</pre>
 +
 
 +
[[File:UIO-4032 rearIO 232 com3.png|RTENOTITLE]]
 +
 
 +
RS-232(4032_COM4)
 +
<pre># stty -F /dev/ttymxc3 -echo -onlcr 115200
 +
# cat /dev/ttymxc3 &
 +
# echo "Serial Port Test" > /dev/ttymxc3
 +
</pre>
 +
 
 +
[[File:UIO-4032 rearIO 232 com4.png|RTENOTITLE]]
 +
 
 +
USB &nbsp;x2<br/> USB3.0 HUB+USB Keyeboard&Mouse<br/> USB3.0 driver data copy compare
 +
 
 +
Ethernet &nbsp;x1
 +
 
 +
[[File:UIO-4032 rearIO ethernet.png|RTENOTITLE]]

Revision as of 04:05, 25 March 2024

RTENOTITLE

General Specificationn

  • 2 x USB 2.0
  • 2 x 2 wires RS-232
  • 1 x GbE
  • Dimension: 146 x 31 x 22mm

Environment Specification

  • Weight: 200g
  • Operating Humidity: 5 ~ 95% relative humidity, non-condensing
  • Operating Temperature: -40 ~ 85 C
  • Storage Temperature: -40 ~ 85 ㆍC and 60 C @ 95% RH Non-Condensing

 

Ordering Information
P/N Description
UIO-4032 UIO-4032, 1 GbE, 2 USB, 2 RS-232

Find Other Products

[edit]

RS-232 x2 : 
 Note:ttymxc2 –COM_3 ttymxc3-COM_4 

'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
$ cat /dev/ttymxc2 &
$ echo "Serial Port Test" > /dev/ttymxc2

USB  

Insert a USB disk

usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk

LAN 

ifconfig eth1 8.8.8.8

COM Port 
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4

RS-232(COM3): 

# stty -F /dev/ttymxc1 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc1

RTENOTITLE

RS-232(COM3): 

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

RTENOTITLE

USB   

USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet 

RTENOTITLE

RTENOTITLE

Rear IO – RS-232 x2 (ttymxc1 & ttymxc3)
RS-232(4032_COM3): 
# stty -F /dev/ttymxc0 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc0

RTENOTITLE

RS-232(4032_COM4) 

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

RTENOTITLE

USB  x2
USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet  x1

RTENOTITLE

RSB-3430

RS-232 x2 : 
 Note:ttymxc2 –COM_3 ttymxc3-COM_4 

'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
$ cat /dev/ttymxc2 &
$ echo "Serial Port Test" > /dev/ttymxc2

USB  

Insert a USB disk

usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk

LAN 

ifconfig eth1 8.8.8.8

RSB-3720

COM Port 
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4

RS-232(COM3): 

# stty -F /dev/ttymxc1 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc1

RTENOTITLE

RS-232(COM3): 

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

RTENOTITLE

USB   

USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet 

RTENOTITLE

RTENOTITLE

RSB-3730

Rear IO – RS-232 x2 (ttymxc1 & ttymxc3)
RS-232(4032_COM3): 
# stty -F /dev/ttymxc0 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc0

RTENOTITLE

RS-232(4032_COM4) 

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

RTENOTITLE

USB  x2
USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet  x1

RTENOTITLE

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=UIO-4032&oldid=34663"