Difference between revisions of "RSB-4810 user guide"
Xingxing.li (talk | contribs) |
|||
(145 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | |||
− | + | == '''产品介绍(product presentation)''' == | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == ''' | + | === '''产品特性(product feature)''' === |
− | + | *Rockchip RK3568 Arm Quad Cortex-A55, up to 2.0GHz | |
+ | *Built-in NPU with processing performance of up to 0.8 TOPS | ||
+ | *Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC | ||
+ | *Supports 1 x HDMI 2.0 4K, 1 x LVDS/MIPI-DSI, and 1 x eDP | ||
+ | *Supports 4K H.264/H.265 video decoder | ||
+ | *Provides 2 x GbE, 1 x SATA 3.0, 6 x UART, 2 x USB 3.0, 2 x USB 2.0, 1 x USB OTG, and 2 x CAN FD | ||
+ | *Provides a M.2 E Key with PCIE 3.0/USB 2.0/SDIO/UART signal for Wi-Fi 5/6 Modules, and a MINI-PCIE with PCIE 3.0/USB 2.0 signal for LTE/5G Modules | ||
+ | *Supports Linux and Android OS | ||
− | == ''' | + | === '''产品官网链接(Product official website link)''' === |
− | + | [https://www.advantech.com/en/products/b6edc1fb-ade2-4760-986c-451b7b3d6dd5/rsb-4810/mod_244fc43f-9c10-43c8-bf08-79cda2e5a8bd RSB-4810 - Rockchip Arm Cortex-A55 RK3568 3.5" SBC - Advantech] | |
− | + | == '''硬件接口说明''' == | |
− | ''' | + | === '''接口布局圖 Board Layout ''' === |
− | + | [[File:4810.png|RTENOTITLE]] | |
− | === ''' | + | === '''接口尺寸 Board Dimension ''' === |
− | |||
− | + | [[File:RSB-4810 Dimensions.PNG|RTENOTITLE]] | |
− | + | === '''接口引脚定義 (Pin definitions)''' === | |
− | == | + | {| border="1" cellpadding="1" cellspacing="1" |
+ | |- | ||
+ | | Jumper List | ||
+ | | | ||
+ | |- | ||
+ | | [[J1_RSB-4810|J1]] | ||
+ | | | ||
+ | MASKROM mode select | ||
− | + | Short pin 12 and power on the RSB-4810 to enter MASKROM mode. | |
− | + | Change back to pin 23 before click "Run" to flash image | |
+ | |- | ||
+ | | [[J2_RSB-4810|J2]] | ||
+ | | CAN impedance matching | ||
+ | |- | ||
+ | | [[J3_RSB-4810|J3]] | ||
+ | | CAN impedance matching | ||
+ | |- | ||
+ | | [[J4_RSB-4810|J4]] | ||
+ | | OTG Mode selection, default USB3.0 host | ||
+ | |- | ||
+ | | [[SW1_RSB-4810|SW1]] | ||
+ | | AT & ATX Mode Switch, default AT mode | ||
+ | |- | ||
+ | | [[BLP1_RSB-4810|BLP1]] | ||
+ | | LVDS BKL PWR 3.3V&5V level select, default 5V | ||
+ | |- | ||
+ | | [[BLP2_RSB-4810|BLP2]] | ||
+ | | LVDS BKL PWR 12V select | ||
+ | |- | ||
+ | | [[VDD1_RSB-4810|VDD1]] | ||
+ | | EDP VDD 3.3V &5V level select, default 3.3V | ||
+ | |- | ||
+ | | [[VDD2_RSB-4810|VDD2]] | ||
+ | | LVDS VDD 3.3V & 5V level select, default 3.3V | ||
+ | |- | ||
+ | | [[J5_RSB-4810|J5]] | ||
+ | | COM5,COM6 power 12/5V level select, default 5V | ||
+ | |} | ||
+ | === '''List''' === | ||
− | {| cellspacing="0" | + | {| border="1" cellpadding="1" cellspacing="1" style="width: 500px;" |
+ | |- | ||
+ | | style="width: 107px;" | [[AUDIO-4810|AUDIO]] | ||
+ | | style="width: 381px;" | Audio pin header (Headphone, Mic in, Speaker) | ||
+ | |- | ||
+ | | style="width: 107px;" | [[EDP-4810|EDP]] | ||
+ | | style="width: 381px;" | eDP CONN | ||
+ | |- | ||
+ | | style="width: 107px;" | [[LVDS-4810|LVDS]] | ||
+ | | style="width: 381px;" | LVDS CONN | ||
+ | |- | ||
+ | | style="width: 107px;" | [[BL-4810|BL]] | ||
+ | | style="width: 381px;" | LVDS Back light Control | ||
+ | |- | ||
+ | | style="width: 107px;" | [[SATA-4810|SATA]] | ||
+ | | style="width: 381px;" | SATA3.0 | ||
+ | |- | ||
+ | | style="width: 107px;" | [[MINIPCIE-4810|MINIPCIE]] | ||
+ | | style="width: 381px;" | MINI PCIe 52P | ||
+ | |- | ||
+ | | style="width: 107px;" | [[SIM-4810|SIM]] | ||
+ | | style="width: 381px;" | Nano SIM card | ||
|- | |- | ||
− | | | + | | style="width: 107px;" | [[M2-4810|M2]] |
− | | | + | | style="width: 381px;" | M.2 E-Key CONN |
− | | | ||
− | |||
− | | style="width: | ||
|- | |- | ||
− | | | + | | style="width: 107px;" | [[SD-4810|SD]] |
− | | | + | | style="width: 381px;" | Micro SD slot |
− | | | + | |- |
− | | | + | | style="width: 107px;" | [[PWRBTN-4810|PWRBTN]] |
− | | style="width: | + | | style="width: 381px;" | Power button and LED |
+ | |- | ||
+ | | style="width: 107px;" | [[DCIN1-4810|DCIN1]] | ||
+ | | style="width: 381px;" | 12V DC jack | ||
+ | |- | ||
+ | | style="width: 107px;" | [[COM1-4810|COM1]] | ||
+ | | style="width: 381px;" | RS-232 pin header | ||
+ | |- | ||
+ | | style="width: 107px;" | [[COM2-4810|COM2]] | ||
+ | | style="width: 381px;" | RS-232 DB9 | ||
+ | |- | ||
+ | | style="width: 107px;" | [[HDMI-4810|HDMI]] | ||
+ | | style="width: 381px;" | HDMI CONN | ||
+ | |- | ||
+ | | style="width: 107px;" | [[CAN1/2-4810|CAN1/2]] | ||
+ | | style="width: 381px;" | CAN FD CONN | ||
+ | |- | ||
+ | | style="width: 107px;" | [[USB1/2-4810|USB1/2]] | ||
+ | | style="width: 381px;" | USB pin header | ||
+ | |- | ||
+ | | style="width: 107px;" | [[USB3/4-4810|USB3/4]] | ||
+ | | style="width: 381px;" | USB Type A ((2 x USB3.0, the lower Type A connector can be configured<br/> to OTG by jumper setting)) | ||
+ | |- | ||
+ | | style="width: 107px;" | [[SATAP-4810|SATAP]] | ||
+ | | style="width: 381px;" | SATA Power | ||
+ | |- | ||
+ | | style="width: 107px;" | [[LAN1-4810|LAN1]] | ||
+ | | style="width: 381px;" | LAN1 | ||
+ | |- | ||
+ | | style="width: 107px;" | [[LAN2-4810|LAN2]] | ||
+ | | style="width: 381px;" | LAN2 | ||
+ | |- | ||
+ | | style="width: 107px;" | [[BAT-4810|BAT]] | ||
+ | | style="width: 381px;" | RTC CONN | ||
+ | |- | ||
+ | | style="width: 107px;" | [[COM3/4-4810|COM3/4]] | ||
+ | | style="width: 381px;" | COM3 and COM4 with RS-232 or RS-485 | ||
+ | |- | ||
+ | | style="width: 107px;" | [[COM5/6-4810|COM5/6]] | ||
+ | | style="width: 381px;" | COM5 and COM6 with RS-232 | ||
+ | |- | ||
+ | | style="width: 107px;" | [[RST-4810|RST]] | ||
+ | | style="width: 381px;" | Reset button | ||
+ | |- | ||
+ | | style="width: 107px;" | [[CN1-4810|CN1]] | ||
+ | | style="width: 381px;" | GPIO CONN | ||
+ | |- | ||
+ | | style="width: 107px;" | [[I2C1-4810|I2C1]] | ||
+ | | style="width: 381px;" | I2C pin header | ||
+ | |- | ||
+ | | style="width: 107px;" | [[RSB-4810_Debug_Port.png|Debug port]] | ||
+ | | style="width: 381px;" | Debug connector | ||
|} | |} | ||
− | ''' | + | == '''快速入门 (Quick Start)''' == |
+ | === '''系统下载 (OS Download)''' === | ||
+ | Note: LIV=Yocto Linux, UIV=Ubuntu, DIV=Debian, AIV=Android | ||
+ | LBV=BSP, LIV=Image | ||
− | {| | + | {| border="2" |
|- | |- | ||
− | | | + | | '''Platform''' |
− | | | + | | '''Product''' |
− | | | + | | '''Image Version''' |
− | | | + | | '''Release Date''' |
− | | | + | | '''Release Version''' |
− | | | + | | '''Release notes''' |
− | | | + | | '''Image Download''' |
− | | | + | | '''BSP Download Tag''' |
+ | | '''Comment''' | ||
+ | | '''CAN2.0 Patch''' | ||
|- | |- | ||
− | | | + | | colspan="1" rowspan="1" | RK3568 |
− | | | + | | colspan="1" rowspan="1" | RSB-4810 |
− | | | + | | DIV130006 |
− | | | + | | 2022/11/01 |
− | | | + | | RTM |
+ | | [http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/RockChip/Linux_Debian_OS_Release_note/RSB-4810/DIV130006 Release_Note] | ||
| | | | ||
+ | [https://pan.baidu.com/s/1W6eh7hBmGpGNG3xmN8eQ8w Baidu] Password:a887 | ||
+ | |||
+ | [https://www.dropbox.com/sh/xdcmuoxn28ek1c8/AAAFmDmXo8YQyhj4yn9ui80va?dl=0 Dropbox] | ||
+ | |||
+ | | RK3568_RISC_DIV130006.xml | ||
+ | | '''[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata ] '''提取码:a887 | ||
+ | | [https://pan.baidu.com/s/19A7ZRUGwPS7Ao3ngN-5sDw?pwd=a887 Baidu] Password:a887 | ||
|} | |} | ||
− | == ''' | + | *Alpha: Basic I/O function bring up by RD; |
+ | |||
+ | *Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated; | ||
+ | |||
+ | *GA: Beta version by QE verification; | ||
+ | |||
+ | *RTM: Beta version by SI/Power/QE verification and pre-loaded; | ||
+ | |||
+ | === '''How to update images .''' === | ||
+ | |||
+ | There are three ways to update images: | ||
+ | |||
+ | ==== [[1._Using_RKTool_RSB-4810_Debain|'''Usering_RKTool.''']] ==== | ||
+ | |||
+ | ==== [[2._RSB-4810_Debian_SD_update_image|'''SD_update image.''']] ==== | ||
+ | |||
+ | ==== [[3._RSB-4810_Debain_OS_update|'''OS_update image. ''']] (TBD) ==== | ||
+ | |||
+ | ==== '''[[4._RSB-4810_Debian_U-boot_update_image.|U-boot update image.]] '''(TBD) ==== | ||
+ | |||
== '''Linux系统的基本使用(Linux System Basic Operating Method)''' == | == '''Linux系统的基本使用(Linux System Basic Operating Method)''' == | ||
− | === ''' | + | === '''乙太網路使用方法(Ethernent Testing Method)''' === |
− | + | '''Command : ifconfig ''' | |
− | + | [[File:RSB-4810 Network test.PNG|RTENOTITLE]] | |
− | + | [[File:RSB-4810 Network test ping.PNG|RTENOTITLE]] | |
=== '''WiFi使用方法(WIFI Testing Method)''' === | === '''WiFi使用方法(WIFI Testing Method)''' === | ||
+ | |||
+ | [[File:RSB-4810 WIFI test1.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 WIFI test2.PNG|RTENOTITLE]] | ||
=== '''4G使用方法(4G Testing Method)''' === | === '''4G使用方法(4G Testing Method)''' === | ||
+ | |||
+ | [[File:RSB-4810 4G test.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 4G test1.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 4G test2.PNG|RTENOTITLE]] | ||
=== '''蓝牙使用方法(BlueTooth Operating Method)''' === | === '''蓝牙使用方法(BlueTooth Operating Method)''' === | ||
+ | |||
+ | [[File:RSB-4810 BT test.PNG|RTENOTITLE]] | ||
=== '''音訊使用方法(BlueTooth Operating Method)''' === | === '''音訊使用方法(BlueTooth Operating Method)''' === | ||
+ | |||
+ | [[File:RSB-4810 Audio test1.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 Audio test2.PNG|RTENOTITLE]] | ||
+ | |||
+ | | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | === '''CAN2.0 測試''' === | ||
+ | |||
+ | '''Note:RK3568 CAN2.0 Errata; ''' | ||
+ | |||
+ | '''CAN2.0 Errata:[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata ] '''提取码:a887 | ||
+ | |||
+ | '''CAN2.0 Patch:'''[https://pan.baidu.com/s/19A7ZRUGwPS7Ao3ngN-5sDw?pwd=a887 Baidu] Password:a887 | ||
+ | |||
+ | Short CAN1/2 Pin header ,Loopback test for example: | ||
+ | |||
+ | CAN0_D+->CAN1_D+ | ||
+ | |||
+ | CAN0_D-->CAN1_D- | ||
+ | |||
+ | [[File:RSB-4810 CAN2.0 Connector.png|RTENOTITLE]] | ||
+ | |||
+ | '''测试CAN2.0功能指令''' | ||
+ | <pre># ip link set can0 down | ||
+ | # ip link set can0 type can bitrate 1000000 | ||
+ | # ip link set can0 up | ||
+ | # ip -details link show can0 | ||
+ | # candump can0 & | ||
+ | # ip link set can1 down | ||
+ | # ip link set can1 type can bitrate 1000000 | ||
+ | # ip link set can1 up | ||
+ | # ip -details link show can1 | ||
+ | # cansend can1 123#55</pre> | ||
+ | |||
+ | [[File:RSB-4810 CAN2.0 loopback.png|RTENOTITLE]] | ||
=== '''I2C 測試( I2C Test method) ''' === | === '''I2C 測試( I2C Test method) ''' === | ||
+ | |||
+ | [[File:RSB-4810 I2C test.PNG|RTENOTITLE]] | ||
=== '''看門狗測試 (Watch Dog Test method) ''' === | === '''看門狗測試 (Watch Dog Test method) ''' === | ||
− | === ''' | + | [[File:RSB-4810 WTD test.PNG|RTENOTITLE]] |
+ | |||
+ | === '''UART測試 (UART Test method) ''' === | ||
+ | |||
+ | [[File:RSB-4810 UART test1.PNG|RTENOTITLE]] | ||
+ | <div>How to Configure RS-232/485 Mode Enter U-boot interrupt mode. Connect the device to the debug port and open the debug console. Press “ctrl + c” before powering on the device.</div> <div>The following information should be displayed on the debug console:</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"><span style="color:#000000;">Hit any key to stop autoboot: 0</span></div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"><span style="color:#000000;">=></span></div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;"><span style="color:#000000;">=></span></div> <div>Then input the following command to configure the UART mode.</div> <div>RS-485 Mode:</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;">setenv uart_mode 0x0c</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;">saveenv</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;">reset</div> <div>RS-232 Mode:</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;">setenv uart_mode 0x00</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;">saveenv</div> <div style="background:#eeeeee;border:1px solid #cccccc;padding:5px 10px;">reset</div> <div>Note: The default value is RS-232. Cp210x supports four ports, but for RSB-4810 only ttyUSB2 and ttyUSB3 support RS-485 mode.</div> <div>In the above command “setenv uart_mode 0x0c”, 0x0c means set bit2(ttyUSB2) and bit3(ttyUSB3) to 1 (0 means to RS-232; 1 means to RS-485). To configure just ttyUSB2 (or ttyUSB3) to RS-485 mode, change 0x0c to 0x04 (or 0x08).</div> | ||
+ | === '''GPIO測試(GPIO Test method) ''' === | ||
+ | |||
+ | [[File:RSB-4810 GPIO test1.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 GPIO test2.PNG|RTENOTITLE]] | ||
+ | |||
+ | === '''Display測試(Display Test method)''' === | ||
+ | |||
+ | [[File:RSB-4810 HDMI test.PNG|RTENOTITLE]] | ||
+ | |||
+ | ==== ''' '''[[How_to_Config_Multi-Display|How_to_Config_Multi-Display]] ==== | ||
+ | |||
+ | [[File:RSB-4810 Multiple Display test.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 Multiple Display uboot test.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 Multiple Display uboot1 test.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 Multiple Display uboot2 test.PNG|RTENOTITLE]] | ||
=== '''遠程訪問及文件傳輸(Remote Access and File Transimmion)''' === | === '''遠程訪問及文件傳輸(Remote Access and File Transimmion)''' === | ||
− | ''' | + | '''查看主板IP位址 ( Chech IP Address ):''' |
+ | |||
+ | [[File:RSB-4810 ssh method1.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 ssh method2.PNG|RTENOTITLE]] | ||
+ | |||
+ | [[File:RSB-4810 ssh method3.PNG|RTENOTITLE]] | ||
+ | |||
+ | '''ID: root password:123456''' | ||
+ | |||
+ | [[File:RSB-4810 ssh method4.PNG|RTENOTITLE]] | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
+ | |||
+ | | ||
== '''通用方法(General Method)''' == | == '''通用方法(General Method)''' == | ||
− | + | '''查看CPU温度(Check CPU Temperature)'''<br/> # cat /sys/devices/virtual/thermal/thermal_zone0/temp 40000 | |
+ | |||
+ | 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 40° | ||
+ | |||
+ | 查看CPU频率(Check CPU Frequency)<br/> cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq <br/> >> 1200000<br/> cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq <br/> >> 1800000 | ||
+ | |||
+ | '''查看内存容量(Check Memory Capacity)''' <br/> # busybox free -m | ||
+ | |||
+ | '''查看存储容量(Check Storage Capacity)''' <br/> # busybox df -h | ||
+ | |||
+ | '''設置RTC (RTC Setting) ''' | ||
− | | + | #date |
− | + | 查看Bribrightness'''(check Bribrightness)''' | |
− | + | root@linaro-alip:~# echo 100 > /sys/class/backlight/backlight/brightness<br/> root@linaro-alip:~# echo 200 > /sys/class/backlight/backlight/brightness<br/> root@linaro-alip:~# cat /sys/class/backlight/backlight/max_brightness<br/> 255<br/> root@linaro-alip:~# cat /sys/class/backlight/backlight/brightness<br/> 200 | |
− | == | + | == How to build Debian 10 BSP (Debian 10 BSP 編譯) == |
− | === | + | [http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_rk3568_series_Debian10 http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_rk3568_series_Debian10] |
+ | <div id="gtx-trans" style="position: absolute; left: -36px; top: 16293.8px;"><div class="gtx-trans-icon"> </div> </div> |
Latest revision as of 05:27, 24 June 2024
Contents
- 1 产品介绍(product presentation)
- 2 硬件接口说明
- 3 快速入门 (Quick Start)
- 4 Linux系统的基本使用(Linux System Basic Operating Method)
- 4.1 乙太網路使用方法(Ethernent Testing Method)
- 4.2 WiFi使用方法(WIFI Testing Method)
- 4.3 4G使用方法(4G Testing Method)
- 4.4 蓝牙使用方法(BlueTooth Operating Method)
- 4.5 音訊使用方法(BlueTooth Operating Method)
- 4.6 CAN2.0 測試
- 4.7 I2C 測試( I2C Test method)
- 4.8 看門狗測試 (Watch Dog Test method)
- 4.9 UART測試 (UART Test method)
- 4.10 GPIO測試(GPIO Test method)
- 4.11 Display測試(Display Test method)
- 4.12 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 5 通用方法(General Method)
- 6 How to build Debian 10 BSP (Debian 10 BSP 編譯)
产品介绍(product presentation)
产品特性(product feature)
- Rockchip RK3568 Arm Quad Cortex-A55, up to 2.0GHz
- Built-in NPU with processing performance of up to 0.8 TOPS
- Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC
- Supports 1 x HDMI 2.0 4K, 1 x LVDS/MIPI-DSI, and 1 x eDP
- Supports 4K H.264/H.265 video decoder
- Provides 2 x GbE, 1 x SATA 3.0, 6 x UART, 2 x USB 3.0, 2 x USB 2.0, 1 x USB OTG, and 2 x CAN FD
- Provides a M.2 E Key with PCIE 3.0/USB 2.0/SDIO/UART signal for Wi-Fi 5/6 Modules, and a MINI-PCIE with PCIE 3.0/USB 2.0 signal for LTE/5G Modules
- Supports Linux and Android OS
产品官网链接(Product official website link)
RSB-4810 - Rockchip Arm Cortex-A55 RK3568 3.5" SBC - Advantech
硬件接口说明
接口布局圖 Board Layout
接口尺寸 Board Dimension
接口引脚定義 (Pin definitions)
Jumper List | |
J1 |
MASKROM mode select Short pin 12 and power on the RSB-4810 to enter MASKROM mode. Change back to pin 23 before click "Run" to flash image |
J2 | CAN impedance matching |
J3 | CAN impedance matching |
J4 | OTG Mode selection, default USB3.0 host |
SW1 | AT & ATX Mode Switch, default AT mode |
BLP1 | LVDS BKL PWR 3.3V&5V level select, default 5V |
BLP2 | LVDS BKL PWR 12V select |
VDD1 | EDP VDD 3.3V &5V level select, default 3.3V |
VDD2 | LVDS VDD 3.3V & 5V level select, default 3.3V |
J5 | COM5,COM6 power 12/5V level select, default 5V |
List
AUDIO | Audio pin header (Headphone, Mic in, Speaker) |
EDP | eDP CONN |
LVDS | LVDS CONN |
BL | LVDS Back light Control |
SATA | SATA3.0 |
MINIPCIE | MINI PCIe 52P |
SIM | Nano SIM card |
M2 | M.2 E-Key CONN |
SD | Micro SD slot |
PWRBTN | Power button and LED |
DCIN1 | 12V DC jack |
COM1 | RS-232 pin header |
COM2 | RS-232 DB9 |
HDMI | HDMI CONN |
CAN1/2 | CAN FD CONN |
USB1/2 | USB pin header |
USB3/4 | USB Type A ((2 x USB3.0, the lower Type A connector can be configured to OTG by jumper setting)) |
SATAP | SATA Power |
LAN1 | LAN1 |
LAN2 | LAN2 |
BAT | RTC CONN |
COM3/4 | COM3 and COM4 with RS-232 or RS-485 |
COM5/6 | COM5 and COM6 with RS-232 |
RST | Reset button |
CN1 | GPIO CONN |
I2C1 | I2C pin header |
Debug port | Debug connector |
快速入门 (Quick Start)
系统下载 (OS Download)
Note: LIV=Yocto Linux, UIV=Ubuntu, DIV=Debian, AIV=Android
LBV=BSP, LIV=Image
Platform | Product | Image Version | Release Date | Release Version | Release notes | Image Download | BSP Download Tag | Comment | CAN2.0 Patch |
RK3568 | RSB-4810 | DIV130006 | 2022/11/01 | RTM | Release_Note |
Baidu Password:a887 |
RK3568_RISC_DIV130006.xml | CAN2.0 Errata 提取码:a887 | Baidu Password:a887 |
- Alpha: Basic I/O function bring up by RD;
- Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
- GA: Beta version by QE verification;
- RTM: Beta version by SI/Power/QE verification and pre-loaded;
How to update images .
There are three ways to update images:
Usering_RKTool.
SD_update image.
OS_update image. (TBD)
U-boot update image. (TBD)
Linux系统的基本使用(Linux System Basic Operating Method)
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
WiFi使用方法(WIFI Testing Method)
4G使用方法(4G Testing Method)
蓝牙使用方法(BlueTooth Operating Method)
音訊使用方法(BlueTooth Operating Method)
CAN2.0 測試
Note:RK3568 CAN2.0 Errata;
CAN2.0 Errata:CAN2.0 Errata 提取码:a887
CAN2.0 Patch:Baidu Password:a887
Short CAN1/2 Pin header ,Loopback test for example:
CAN0_D+->CAN1_D+
CAN0_D-->CAN1_D-
测试CAN2.0功能指令
# ip link set can0 down # ip link set can0 type can bitrate 1000000 # ip link set can0 up # ip -details link show can0 # candump can0 & # ip link set can1 down # ip link set can1 type can bitrate 1000000 # ip link set can1 up # ip -details link show can1 # cansend can1 123#55
I2C 測試( I2C Test method)
看門狗測試 (Watch Dog Test method)
UART測試 (UART Test method)
GPIO測試(GPIO Test method)
Display測試(Display Test method)
How_to_Config_Multi-Display
遠程訪問及文件傳輸(Remote Access and File Transimmion)
查看主板IP位址 ( Chech IP Address ):
ID: root password:123456
通用方法(General Method)
查看CPU温度(Check CPU Temperature)
# cat /sys/devices/virtual/thermal/thermal_zone0/temp 40000
或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 40°
查看CPU频率(Check CPU Frequency)
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
>> 1200000
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
>> 1800000
查看内存容量(Check Memory Capacity)
# busybox free -m
查看存储容量(Check Storage Capacity)
# busybox df -h
設置RTC (RTC Setting)
- date
查看Bribrightness(check Bribrightness)
root@linaro-alip:~# echo 100 > /sys/class/backlight/backlight/brightness
root@linaro-alip:~# echo 200 > /sys/class/backlight/backlight/brightness
root@linaro-alip:~# cat /sys/class/backlight/backlight/max_brightness
255
root@linaro-alip:~# cat /sys/class/backlight/backlight/brightness
200
How to build Debian 10 BSP (Debian 10 BSP 編譯)
http://ess-wiki.advantech.com.tw/view/Linux_BSP_User_Guide_for_rk3568_series_Debian10