Difference between revisions of "ROM-6881 user guide"

From ESS-WIKI
Jump to: navigation, search
 
(15 intermediate revisions by 2 users not shown)
Line 8: Line 8:
 
*4 x PCIe 3.0, dual gigabit LAN, 2 x USB 3.0, USB2.0 OTG, SATA 3.0, 2 x CAN, 4 x MIPI-CSI, 3 x UART  
 
*4 x PCIe 3.0, dual gigabit LAN, 2 x USB 3.0, USB2.0 OTG, SATA 3.0, 2 x CAN, 4 x MIPI-CSI, 3 x UART  
 
*Supports Linux Debian11 and Android  
 
*Supports Linux Debian11 and Android  
 +
 +
 
  
 
=== '''產品官網鏈接（Product official website link）''' ===
 
=== '''產品官網鏈接（Product official website link）''' ===
  
−
 
+
[https://www.advantech.com.cn/zh-cn/products/77b59009-31a9-4751-bee1-45827a844421/rom-6881/mod_65b12594-2c3b-400b-b386-ed97aeb47852 ROM-6881 - 研华 (advantech.com.cn)]
  
 
== '''接口佈局和尺寸（Layout and Sizes）''' ==
 
== '''接口佈局和尺寸（Layout and Sizes）''' ==
Line 17: Line 19:
 
=== '''ROM-6881接口佈局图 Board Dimension Layout''' ===
 
=== '''ROM-6881接口佈局图 Board Dimension Layout''' ===
  
−
[[File:ROM-6881 01 .png|500x300px|ROM-6881 01 .png]]
+
[[File:ROM-6881 core board.png|RTENOTITLE]]
−
 
 
−
=== '''ROM-6881機械尺寸（Mechanical Specifications）''' ===
 
  
 
=== '''SOM-DB2510 A1 Board Dimension Layout''' ===
 
=== '''SOM-DB2510 A1 Board Dimension Layout''' ===
Line 27: Line 27:
 
[[File:SOM-DB2510.PNG|RTENOTITLE]]
 
[[File:SOM-DB2510.PNG|RTENOTITLE]]
  
−
=== '''SOM-DB2510 Connectors and Jumper Settings''' ===
+
=== '''SOM-DB2510 Connectors and Jumper Settings（default state）''' ===
  
 
'''Connector Locations'''
 
'''Connector Locations'''
Line 346: Line 346:
 
|}
 
|}
  
−
=== '''Switch Settings'''  ===
+
=== '''Switch Settings''' ===
 +
 
 +
'''ROM-6881 Switch Settings'''
 +
 
 +
*[[ROM-6881_SW1|SW1]]（AT & ATX Mode Switch）
 +
 
 +
'''SOM-DB2510 Switch Settings''' 
  
 
*[[SW4|SW4]] (Boot Select/Force Recovery/Test Switches)  
 
*[[SW4|SW4]] (Boot Select/Force Recovery/Test Switches)  
Line 357: Line 363:
  
 
=== '''接口引脚定義 (Connector Pin definitions)''' ===
 
=== '''接口引脚定義 (Connector Pin definitions)''' ===
 +
 +
'''ROM-6881 Pin Connector'''
 +
 +
*[[ROM-6881_CN1_MIPI-CSI2_Connector|CN1 MIPI-CSI2 Connector]]
 +
*[[ROM-6881_CN2_MIPI-CSI3_Connector|CN2 MIPI-CSI3 Connector]]
 +
 +
'''SOM-DB2510  Pin Connector'''
  
 
*[[ATX1_Pin_Connector| ATX1 Pin Connector]]  
 
*[[ATX1_Pin_Connector| ATX1 Pin Connector]]  
Line 413: Line 426:
 
=== '''ROM-6881 機械尺寸（Mechanical Characteristics）''' ===
 
=== '''ROM-6881 機械尺寸（Mechanical Characteristics）''' ===
  
−
 
+
* Dimension: SMARC form factor size: (D x W) 82 x 80 mm / 3.22 x 3.15 inch
 +
* Height on Top: 2.4 mm
 +
* Height on Bottom: 1.45 mm
 +
 
 +
[[File:ROM-6881 Mechanical Characteristiics.png|RTENOTITLE]]
  
 
=== '''SOM-DB2510_A1 机械尺寸 ('''Mechanical Characteristics) ===
 
=== '''SOM-DB2510_A1 机械尺寸 ('''Mechanical Characteristics) ===
Line 430: Line 447:
  
 
[[File:SOM-DB2510 Board Mechanical Diagram Side2.png|RTENOTITLE]]
 
[[File:SOM-DB2510 Board Mechanical Diagram Side2.png|RTENOTITLE]]
−
 
−
 
 
  
 
=== '''Assemblly Diagram''' ===
 
=== '''Assemblly Diagram''' ===
Line 437: Line 452:
 
These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.
 
These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.
  
−
[[File:ROM-5880 for SOM-DB2510 Assembly Diagram.png|RTENOTITLE]]
+
[[File:ROM-6881 Assemblly Diagram.png|RTENOTITLE]]
  
−
 
+
== '''快速入门 (Quick Start)''' ==
  
−
== '''快速入门 (Quick Start)''' ==
 
  
 
=== '''系统下载 (OS Download)''' ===
 
=== '''系统下载 (OS Download)''' ===
Line 471: Line 485:
  
 
| RK3588_RISC_DIV106011.xml
 
| RK3588_RISC_DIV106011.xml
−
|  
+
| [https://pan.baidu.com/s/1EjIwk1i0RexK1AMZ0LhtWw?pwd=a887 CAN2.0 Errata]   Password：a887
−
|-
 
−
| colspan="1" rowspan="1" | RK3588
 
−
| colspan="1" rowspan="1" | ROM-6881
 
−
| DIV106005
 
−
| 2023/06/27
 
−
| Alpha
 
−
| [http://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/RockChip/Linux_Debian_OS_Release_note/ROM-6881/DIV106005 Release_Note]
 
−
| [https://pan.baidu.com/s/ Baidu]      Password：a887  
 
−
[https://www.dropbox.com/ Dropbox]
 
−
 
 
−
| RK3588_RISC_DIV106005.xml
 
−
|  
 
 
|}
 
|}
  
Line 491: Line 493:
  
 
*GA:  Beta version by QE verification;  
 
*GA:  Beta version by QE verification;  
−
*RTM:  Beta version by SI/Power/QE verification and pre-loaded;  
+
*RTM:  Beta version by SI/Power/QE verification and pre-loaded;
−
 
 
  
 
=== '''Debian 燒錄方法 (Debiand Flash eMMC Method)''' ===
 
=== '''Debian 燒錄方法 (Debiand Flash eMMC Method)''' ===
  
−
'''1. Usering_RKTool.'''
+
'''<span style="color:#2980b9;">1.</span> [[ROM-6881_Usering_RKTool.|Usering_RKTool.]]'''
  
−
'''2. Usering bootup_sd_disk made_by SDDiskTool.'''
+
'''<span style="color:#2980b9;">2.</span> [[ROM-6881_Usering_bootup_sd_disk_made_by_SDDiskTool.|Usering bootup_sd_disk made_by SDDiskTool.]]'''
  
 
== '''Linux基本使用方法''' ==
 
== '''Linux基本使用方法''' ==
  
 
*[[ROM-6881_Getting_start|Getting start]]  
 
*[[ROM-6881_Getting_start|Getting start]]  
−
*MAC_Address  
+
*[[MAC_Address|MAC_Address]]
 
*[[ROM-6881_Qt_Toolchain|Qt _Toolchain]]  
 
*[[ROM-6881_Qt_Toolchain|Qt _Toolchain]]  
−
*[[ROM-6881_NPU|NPU]]
+
*[[ROM-6881_NPU|NPU]]  
  
 
== '''Linux BSP编译方法（Linux BSP Compile Method）''' ==
 
== '''Linux BSP编译方法（Linux BSP Compile Method）''' ==
  
−
*[[Linux_BSP_User_Guide_for_ROM-6881_series_Debian11|'''Linux_BSP_User_Guide_for ROM-6881_series_Debian11''']]
+
*[[Linux_BSP_User_Guide_for_ROM-6881_series_Debian11|'''Linux_BSP_User_Guide_for ROM-6881_series_Debian11''']]  
 +
<div id="gtx-trans" style="position: absolute; left: 121px; top: 13467.2px;"><div class="gtx-trans-icon">&nbsp;</div> </div>

Latest revision as of 06:49, 24 June 2024

產品特性(Features)

  • Rockchip RK3588 Arm Quad Cortex-A76 2.4GHz and Quad Cortex-A55 1.8 GHz
  • Onboard 4/8 GB LPDDR4 memory and 32/64 GB eMMC
  • Supports 8K @ 60 fps H.265/VP9 video decoding and 8K @ 30 fps H.265/H.264 video encoding
  • Supports HDMI, DP, eDP and LVDS/DSI
  • 4 x PCIe 3.0, dual gigabit LAN, 2 x USB 3.0, USB2.0 OTG, SATA 3.0, 2 x CAN, 4 x MIPI-CSI, 3 x UART
  • Supports Linux Debian11 and Android

 

產品官網鏈接（Product official website link）

ROM-6881 - 研华 (advantech.com.cn)

接口佈局和尺寸（Layout and Sizes）

ROM-6881接口佈局图 Board Dimension Layout

RTENOTITLE

SOM-DB2510 A1 Board Dimension Layout

The figures below indicate the main chips on SOM-DB2510 Development Board for  SMARC 2.1.

RTENOTITLE

SOM-DB2510 Connectors and Jumper Settings（default state）

Connector Locations

RTENOTITLE

RTENOTITLE

Switch Locations

RTENOTITLE

I/O Connctor Locations

RTENOTITLE

Button Locations

RTENOTITLE

LED Locations

RTENOTITLE

Label Function Label Function
ATX1 ATX Connector FAN1 Smart Fan Connector
SMARC_IN1 Wide Range Input Power Connector (3V~5.25V) FAN2 System Fan Connector
DCIN1 DCIN connector CAN0_1 CAN Bus Connector
DP0_HDMI DP & HDMI Connector USB0 USB OTG Connector
USB12 USB 2.0 port1~2 & USB 3.0 port0 Connector COM1_3 COM Port Port1,3 Connector
TYPEC_DP1 Type-C Connector COM2_4 COM Port Port2,4 Connector
LAN0_LAN1 LAN0 & LAN1 Connector CN8 I2C connector for I2C_PM
LOUT1 Line Out Connector CN7 I2C Connector for I2C_GP
MIC1 MIC1 Connector CN10 eSPI Pin Header
CN1_MXM1 SMARC Connector SATAP1 SATA Power Connector
PCIEA-X4 PCIe x4 Connector CSI0_B2B MIPI B2B Connector for 2M Camera
SATA1 SATA Port0 Connector CSI1_B2B MIPI B2B Connector for 8M & 13M Camera
PCIED-X1 PCIe x1 Connector SPI_BIOS1 Carrier Board BIOS Socket (SOIC)
M2 M.2 Key-E Connector BAT1 Coin battery holder
MPCIE_C Mini PCIe Connector BAT2 Smart battery Connector
SIM SIM card Connector LINEOUT_1 I2S Headphone Connector
LVDS1 LVDS1 Connector MIC_1 I2S MIC In Connector
LVDS0 LVDS0 Connector CSI1_FPC MIPI FPC Connector for 8M & 13M Camera
LVDS1_INVERTER LVDS1 Invertor Connector CSI0_FPC MIPI FPC Connector for 2M Camera
LVDS0_INVERTER LVDS0 Invertor Connector CN5 I2S2 Connector
SPI_BIOS2 Carrier Board BIOS Socket (QFN) CN17 I2S0 Connector
SD SD Card Connector    

Jumper Locations

RTENOTITLE

RTENOTITLE

Lable Function Lable Function
BTN3 Sleep Button J14 EDP1/LVDS1 Hot-Plug Detect Selection Header
BTN1 Power Button J56 Standby Voltage Control Header
BTN2 Reset Button J44 Module +3.3V/+5V Power Selection Header
SW4 BOOT SELECT Switch PSON1 AT/ATX Selection Header
LID1 LID Switch SPI_CN1 SPI Header
J30 Enable Battery Low# Header CN14 For CAN Bus port0 Terminal Resistor
M2E_DISABLE_N1 M.2 Wireless Disable CN15 For CAN Bus port1 Terminal Resistor
J29 SMB Alert Enable Header J3/J4 DP0 EQ0 Selection
CN9 Header For GPIO Test J5/J6 DP0 EQ1 Selection
J7/J8 LVDS0 Power Selection Header J58 PCIE_B_CKREQ# Selection
J11/J12 LVDS1 Power Selection Header J59 PCIE_A_CKREQ# Selection
J9 LVDS0 Inverter Power Selection Heade GPIO_0 GPIO0/CAM0_PWR# Selection
J10 EDP0/LVDS0 Hot-Plug Detect Selection Header GPIO_1 GPIO1/CAM1_PWR# Selection
J26 HDA/I2S Selection Header GPIO_2 GPIO2/CAM0_RST# Selection
J1 DP1/HDMI1 Select GPIO_3 GPIO3/CAM1_RST# Selection
J13 LVDS1 Inverter Power Selection Header GPIO_4 GPIO4/HDA_RST# Selection
J31 Clear CMOS Header GPIO_5 GPIO5/PWM_OUT Selection
J25 SPI Power Header GPIO_6 GPIO6/TACHIN Selection
SW1 COM1 mode Select SATA_ACT_PH1 SATA act# Header
SW2 COM3 mode Select PWRBTN_PH1 Power button Header
J41 Core Power Voltage Control Header SYS_RESET_PH1 Reset button Header
J2 DDI1 AUX/DDC Selection    

LED Function List 

Location Function
MODULE_VIN_LED1 WDT_TIME_OUT# Indicate
MODULE_5V_LED Module 5V Indicate
MODULE_VIN_LED Module +V_MOD_IN Indicate
RESET_OUT_LED RESET_OUT Indicate
RESET_OUT_LED CARRIER_STBY Indicate
CARRIER_PWR_ON_LED CARRIER_PWR_ON Indicate
MODULE_3P3V_LED Module 3.3V Indicate
3P3V_LED Carrier Board +V3.3 Indicate
5V_LED Carrier Board +V5 Indicate
5V_DUAL_LED Carrier Board +V5SB Indicate
3P3V_DUAL_LED Carrier Board +V3.3SB Indicate
5VA_LED Carrier Board +V5D_MOD Indicate
SATA_LED SATA Indicate
SOM_LED SOM BOM Indicate
RISC_LED RISC BOM Indicate

Switch Settings

ROM-6881 Switch Settings

  • SW1（AT & ATX Mode Switch）

SOM-DB2510 Switch Settings 

  • SW4 (Boot Select/Force Recovery/Test Switches)
  • LID1 (LID Button Enable/Disable Switches)
  • SW5 (LAN CONN LED Pull High Switches)
  • SW1(COM0 Settings)
  • SW2(COM2 Settings)
  • SW3 (I2S Clock Settings)
  • M2E_DISABLE_N1(M.2 Wireless Disable Switch)

接口引脚定義 (Connector Pin definitions)

ROM-6881 Pin Connector

SOM-DB2510  Pin Connector

ROM-6881 機械尺寸（Mechanical Characteristics）

  •  Dimension: SMARC form factor size: (D x W) 82 x 80 mm / 3.22 x 3.15 inch
  •  Height on Top: 2.4 mm
  •  Height on Bottom: 1.45 mm

RTENOTITLE

SOM-DB2510_A1 机械尺寸 (Mechanical Characteristics)

For more details regarding our 2D/3D models, please visit the Advantech COM support  service website at: http://com.advantech.com.

Board Mechanical Diagram -Front

RTENOTITLE

Board Mechanical Diagram -Side1

RTENOTITLE

Board Mechanical Diagram -Side2

RTENOTITLE

Assemblly Diagram

These figures demonstrate the order of assembly needed when attaching the thermal  module and COM module to the carrier board.

RTENOTITLE

快速入门 (Quick Start)

系统下载 (OS Download)

Note：LIV=Yocto Linux , UIV=Ubuntu，DIV=Debain，AIV=Android 

            LBV=BSP，LIV=Image

Platform Product Image Version Release Date Release Version Release notes Image Download BSP Download Tag Comment
RK3588 ROM-6881 DIV106011 2023/09/08 RTM Release_Note Baidu      Password：a887

Dropbox

RK3588_RISC_DIV106011.xml CAN2.0 Errata   Password：a887
  • Alpha:  Basic I/O function bring up by RD;
  • Beta:  Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
  • GA:  Beta version by QE verification;
  • RTM:  Beta version by SI/Power/QE verification and pre-loaded;

Debian 燒錄方法 (Debiand Flash eMMC Method)

1. Usering_RKTool.

2. Usering bootup_sd_disk made_by SDDiskTool.

Linux基本使用方法

Linux BSP编译方法（Linux BSP Compile Method）

 
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-6881_user_guide&oldid=35868"