Difference between revisions of "RSB-3730 Yocto4.2 UIO Test"
From ESS-WIKI
Xingxing.li (talk | contribs) (→RS-232) |
Xingxing.li (talk | contribs) |
||
Line 31: | Line 31: | ||
[[File:RSB-3730 UIO-4030 RS-232.png|RTENOTITLE]] | [[File:RSB-3730 UIO-4030 RS-232.png|RTENOTITLE]] | ||
+ | |||
=== '''CN3_GPIO''' === | === '''CN3_GPIO''' === | ||
[[File:RSB-3730 UIO CN3 GPIO.png|500x300px|RSB-3730 UIO CN3 GPIO.png]] | [[File:RSB-3730 UIO CN3 GPIO.png|500x300px|RSB-3730 UIO CN3 GPIO.png]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
'''for example:Short GPIO pin1(in) 151 & pin6(out) 141''' | '''for example:Short GPIO pin1(in) 151 & pin6(out) 141''' |
Revision as of 07:30, 4 July 2024
UIO-4030 Function
Note:
Device:ttymxc0 - COM_3, ttyUSB0 - COM_4(RS-485)
Need one Adam-4520I module for RS-485.
The test method is as follows
RS-232 U-boot setting:
u-boot=> setenv uart_mode 2:0 u-boot=> saveenv Saving Environment to MMC... Writing to MMC(2)... OK u-boot=> reset
RS-232(COM_3)
# stty -F /dev/ttymxc0 -echo -onlcr 115200 # cat /dev/ttymxc0 & [1] 653 # echo "Serial Port Test" > /dev/ttymxc0 Serial Port Test
CN3_GPIO
for example:Short GPIO pin1(in) 151 & pin6(out) 141
# echo 150 > /sys/class/gpio/export # echo 141 > /sys/class/gpio/export # echo in > /sys/class/gpio/gpio1/direction # echo out > /sys/class/gpio/gpio2/direction # echo 1 > /sys/class/gpio/gpio2/value # cat /sys/class/gpio/gpio1/value 0 # cat /sys/class/gpio/gpio2/value 1
RS-485
RS-485 U-boot Setting:
RS-485(COM4_):
# stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke # cat /dev/ttyUSB0 & # echo "Serial Test" > /dev/ttyUSB0