Difference between revisions of "RSB-3810 user guide Android11"

Revision as of 11:39, 26 July 2024

產品介紹(Product introduction )

產品特性(Product Features)

• MediaTek Genio 1200 4核心A78和4核心A55
• 內建LPDDR4 8GB，4000MT/s記憶體
• HDMI 4k60fps，1 x 雙通道24位元LVDS
• 1 x 4線RS-232/422/485，2 x USB3.2 Gen1 By 1，2 x USB2.0，1 x Micro SD，1 x Mic. in / Line out
• 1 x M.2 3052 Key B for 5G，1 x M.2 2230 Key E Slot for WiFi/BT
• 支援UIO40-Express I/O板擴充
• 支援Ubuntu、Ycoto Linux和Android

產品官網連結(Product official website link)

RSB-3810

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

RSB-3810 接口布局圖 Board Dimension Layout

Jumper list:

Connectot list:

接口引脚定義 (Pin definitions)

• BAT (RTC Battery CONN.)
• BL1 (LVDS Backlight 1)
• COM1 (Debug Console + RS232/RS485)
• CSI0 (MIPI-CSI Camera Input 0)
• CSI1 (MIPI-CSI Camera Input 1)
• CSI2 (MIPI-CSI Camera Input 2)
• DCIN (12V DC Jack)
• DCIN1 (12V DC-IN Pin Header)
• HDMI (HDMI CONN.)
• LAN (Ethernet eth0+eth1)
• LOUT (Line Out Pin Header)
• LVDS0 (LVDS channel 0)
• LVDS1 (LVDS channel 1)
• M2 (M.2 Key E CONN.)
• MIC (MIC In Pin Header)
• M2B (M.2 keyB CONN.)
• RST (Reset Button)
• SD (SD Slot)
• SIM (SIM Slot)
• UIO1 (UIO40-Express Pin Header 1)
• UIO2 (UIO40-Express Pin Header 2)
• USB 1 (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)
• DL_KEY(Download Key)
• LED

机械尺寸 (Mechanical Characteristics)

快速入门 (Quick Start)

系统下载 (OS Download)

Android 11 OS download

Debug port 連接與設定(Debug Port Connection and Setting)

1. RSB-3810 debug port is shared with COM1. Please connect the debug console cable 1700034345-01 & 1700019474. Then connect the USB-to-RS232 Cable to your PC terminal. Connect the cable to COM1 pin header to the nearby the HDMI connector.

2. RSB-3810 can communicate with a host server using serial cables. Common serial communication programs such as HyperTerminal, Tera Term or PuTTY can be used in such applications. The example demonstrated below describes the serial terminal setup using Tera Term on a Windows host: Open Tera Term on your Windows PC, set the Baud rate to 921600.

燒錄方法 (Flash eMMC Method)

Step1: 下載MTK燒錄工具SP Flash Tool V5 (Download MTK flash tool "SP Flash Tool V5")

支援作業系統(Support OS):

• Windows 7
• Windows 10
• Ubuntu 16.x
• Ubuntu 18.x

Step2:使用USB Type-A to Type-A線連接電腦處機與裝置的USB Type-A孔位, 如下圖位置(Connect the usb type A to host computer and device type A port)

Step3: 重BSP下載以下image檔案或是解壓縮image檔(You need to download the image files from BSP as below or extract from image file.)

BSP image File path:out/target/product/mt8395_rsb3810a1

MT8195_Android_scatter.txt
preloader_mt8395_rsb3810a1.bin
vbmeta.img
vbmeta_system.img
vbmeta_vendor.img
spmfw.img
pi_img.img
dpm.img
scp.img
sspm.img
mcupm.img
cam_vpu1.img 
cam_vpu2.img 
cam_vpu3.img
lk.img 
boot.img
dtbo.img
tee.img
logo.bin
super.img
userdata.img

Step 4: 執行SP flash tool V5 燒錄工具(Launch SP flash tool V5)

(1) 選擇MT9195_Android_scatter.txt檔(Select the MT8195_Android_scatter.txt file)

(2)選擇"Format ALL + Download"(Select theFormat All + Download)

(3)點選Download按鈕(Click the Download button)

Step 5 . 重新啟動裝置後系統會自己開始燒錄(Reboot the device and start to burn all image)

Step 6. 重新上電開機 (Turn on the power, then check the Debug message)

Android系统的基本使用(Android System Basic Operating Method)

Display Setting (RSB-3810)

HDMI TX:

Step 1: Setting-->Storage

Step 2: Play a video

CHeck HDMI mode and support resolution:

HDMI RX:

(1) Connect a play video host PC device

(2) connect HDMI from PC to RSB-3810

(3) setenforce 0

(4) open the RxVideo apk

(5) Play a video on host PC

(6) check the video and sound can output to HDMI monitor

LVDS: Dual Channel LVDS Panel: G215HVN0 (VDD: 5V, Backlight Power: 12V)
Step 1: Connect 96LEDK-A215FH30NF2 LVDS panel with the LVDS cable. Connect this to the LVDS. Connect the Backlight cable to BL1.

Step 2: Connect another 12V adapter to the DC-Jack on the backlight cable.

Step 3: Power on RSB-3810 and the extra 12V adapter.

Step 4: Press enter after boot. The system will stop at u-boot as demonstrated below, enter the command in red and press enter

Audio使用方法(Audio Testing Method):

Step 1: Check audio codec

Step 2: Record and playback:

Play audio file and check the sound output from Linu-out. Copy LRMonoPhase4.wav to the system
stop audioserver

Connect Audio output from phone to RSB-3810 MIC. Record audio from phone and play the recorded file to check the sound.
stop audioserver

M.2使用方法EWM-W174(M.2 Testing Method with EWM-W174): 

• Test Wi-Fi with EWM-W174M201E Module (PCIe Interface)

Step 1: Open Android Setting.
Step 2: Click Network & internet.
Step 3: Search for WIFI

• Test Bluetooth with EWM-W174M201E Module (USB Interface)

Step 1: Open Android Setting.
Step 2: Click Connected devices.
Step 3: Click Connection preferences.
Step 4: Click Bluetooth.
Step 5: On and Pair new device
Step 6: Available devices

Serial port使用方法(Serial port Testing Method):

• RS-232 Loopback Test (eg. ttyS3):

• RS-422 Test:

Step 1: First change the debug console port to UART2 (UIO-4030COM_3), or use telnet to login to the system console to issue the command for the com port test.
Step 2: Test RS-422 with Adam-4520. Connect Adam-4520 with COM1 with 1700100250 DB9 as the following:
Adam-4520 RX- <--> RSB-3810 COM1 DB9 Pin 1, 
Adam-4520 RX+ <--> RSB-3810 COM1 DB9 Pin 2,
Adam-4520 TX- <--> RSB-3810 COM1 DB9 Pin 4,
Adam-4520 TX+ <--> RSB-3810 COM1 DB9 Pin 3,

Step 3: Set GPIO#328, GPIO#327 Set to 1,1

Step 4: Test RS-422 with Adam-4520. Connect Adam-4520 with COM1 with 1700100250 DB9 as the following command:

• RS-485 Test:

Step 1: Test RS-485 with Adam-4520. Connect Adam-4520 with COM1 with 1700100250 DB9 as the following:
Adam-4520 Pin 1: Data- connect to DB9 Pin 1: COM_DCD.
Adam-4520 Pin 2: Data+ connect to DB9 Pin 3: COM_RXD.

Step 2: Set GPIO#328, GPIO#327 Set to 0,1

Step 3: Test RS-422 with Adam-4520. Connect Adam-4520 with COM1 with 1700100250 DB9 as the following command:

I2C使用方法(I2C Test Method):

Step 1: Check i2c device

Step 2: I2c set and get

USB: USB disk test (USB 2.0/ USB 3.2 Gen 1 By 1 port)

Step 1: Issue the following command (lsusb -t) after inserting a USB disk into the USB 2.0 port or USB 3.2 Gen 1 port to check if the USB device is listed.

Step 2: Test (eg. if usb disk is /dev/sda)

RTC使用方法(RTC Test Method):

Step 1: Set system time to current, then write to RTC

Step 2: Set one incorrect time, then read time from RTC to verify

Step 3: Restore the RTC time to system time

eMMC/SD/SPI flash使用方法(eMMC/SD/SPI flash Testing Method):

eMMC: /dev/mmcblk2
SD: /dev/ mmcblk1p1

Test (eg. emmc)
Step 1: Open Android Setting.
Step 2: Click Storage

Ethernet使用方法(Ethernet Testing Method):

Step 1: Check the Ethernet device

Step 2: Connect the cable and ping test (eg. Eth0)

GPIO使用方法(GPIO Testing Method):

• GPIO Pins:

UIO Extension 1(UIO1):

UIO Extension2 (UIO2):

• GPIO Loopback Test (Using GPIO2 and GPIO4 as examples):

Step 1: Connect GPIO2 and GPIO4
Step 2: Export GPIO interface

Step 3: Set GPIO direction

Step 4: Read value and set output value than check

Watchdog使用方法(Watchdog Testing Method):

• Internal Watchdog:

Step 1: System will reboot after 60 sec. androidboot.bootreason=HW_reboot

Step 2: System will reboot after 60 sec. androidboot.bootreason=HW_reboot

Step 3: System will reboot after 3 sec. androidboot.bootreason=reboot

Step 4: System will reboot after 1 sec. androidboot.bootreason=kernel_panic

• External Watchdog:

Step 1: System will reboot after 60 sec. androidboot.bootreason=usb

Step 2: System will not reboot. Watchdog can be refreshed when feed dog before it timeout.
Step 3: System will reboot after 10 sec ==> Watchdog does not refresh after it time- out.

androidboot.bootreason=usb

Camera(Default MIPI-CSI0 and MIPI-CSI1 are for OV5640):

MIPI-CSI0 (Tested with OV5640 + mini-SAS to MIPI-CSI Cable)

Step 1: Use Android camera app to test 
Step 2: Take pictures
Step 3: Video recording 
Step 4: Check photo

MIPI-CSI1 (Tested with OV5640 + mini-SAS to MIPI-CSI Cable)

Step 1: Use Android camera app to test 
Step 2: Take pictures
Step 3: Video recording 
Step 4: Check photo

MIPI-CSI2 (Tested with OV5640 + mini-SAS to MIPI-CSI Cable)

Step 1: Remove the CSI-0 and CSI-1 camera first
Step 2: Use Android camera app to test
Step 3: Take pictures
Step 4: Video recording
Step 5: Check photo

TPM測試方法(TPM Testing Method):

Please use tpm_test.bin to test.

LED ON/OFF 使用方法(LED ONOFF Testing Method):

UIO-4030使用方法(UIO-4030 Testing Method):

UIO-4032使用方法(UIO-4032 Testing Method):

UIO-4034使用方法(UIO-4034 Testing Method):

UIO-4036使用方法(UIO-4036 Testing Method):

UIO-4038使用方法(UIO-4038 Testing Method):

UIO-4040使用方法(UIO-4040 Testing Method):

通用方法(General Method)

ADB debug:

Step1 :RSB-3810 Device setting

console:/ $ su
console:/ # setprop service.adb.tcp.port 5555
console:/ # stop adbd
console:/ # start adbd
console:/ # ifconfig

Step2 : adb platform-tools

D:\platform-tools>ping 172.22.28.102
D:\platform-tools>adb connect 172.22.28.102:5555
D:\platform-tools>adb root
D:\platform-tools>adb shell

Android11 BSP編譯方法(Android11 BSP Compile Method)

Android BSP User Guide for mt8395 series 11.0 - ESS-WIKI (advantech.com.tw)