Difference between revisions of "UIO-4032"

Revision as of 06:27, 1 August 2024

General Specificationn

2 x USB 2.0
2 x 2 wires RS-232
1 x GbE
Dimension: 146 x 31 x 22mm

Environment Specification

Weight: 200g
Operating Humidity: 5 ~ 95% relative humidity, non-condensing
Operating Temperature: -40 ~ 85 C
Storage Temperature: -40 ~ 85 ㆍC and 60 C @ 95% RH Non-Condensing

Ordering Information

P/N	Description
UIO-4032	UIO-4032, 1 GbE, 2 USB, 2 RS-232

Find Other Products

[edit]

RSB-3430
RSB-3720
RSB-3730
RSB-3710
RSB-3810

RS-232 x2 :
Note:ttymxc2 –COM_3 ttymxc3-COM_4

'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
$ cat /dev/ttymxc2 &
$ echo "Serial Port Test" > /dev/ttymxc2

USB

Insert a USB disk

usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk

LAN

ifconfig eth1 8.8.8.8

COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4

RS-232(COM3):

# stty -F /dev/ttymxc1 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc1

RS-232(COM3):

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

USB

USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet

Rear IO – RS-232 x2 (ttymxc1 & ttymxc3)
RS-232(4032_COM3):

# stty -F /dev/ttymxc0 -echo -onlcr 115200
# cat /dev/ttymxc0 &
# echo "Serial Port Test" > /dev/ttymxc0

RS-232(4032_COM4)

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

USB x2
USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet x1

COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttyS0– COM3
ttyS4– COM4

RS-232(COM3):

# stty -F /dev/ttyS0 -echo -onlcr 115200
# cat /dev/ttyS0 &
# echo "Serial Port Test" > /dev/ttyS0

RS-232(COM3):

# stty -F /dev/ttyS4 -echo -onlcr 115200
# cat /dev/ttyS4 &
# echo "Serial Port Test" > /dev/ttyS4

USB

USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet

@@ Line 143: / Line 143: @@
 # echo "Serial Port Test" > /dev/ttyS4</pre>
+&nbsp;
 '''USB&nbsp;&nbsp;'''
@@ Line 152: / Line 152: @@
 [[File:UIO-4032 RSB-3710 ethernet.PNG|RTENOTITLE]]
 <div id="gtx-trans" style="position: absolute; left: 23px; top: 3342.25px;"><div class="gtx-trans-icon">&nbsp;</div> </div>
 = RSB-3810 =
-{| border="1" cellpadding="1" cellspacing="1"
+<headertabs></headertabs>
-|-
-| colspan="1" rowspan="2" | 1
-| colspan="1" rowspan="2" |
-UART
-COM_3:ttyS3
-COM_4:ttyS1
-| # stty -F /dev/ttyS3 -echo -onlcr 921600 raw<br/> # cat /dev/ttyS3 &<br/> # echo "Serial Port Test" > /dev/ttyS3 or<br/> # microcom -s 921600 -X /dev/ttyS3 # cat /dev/ttyS3 &
-|-
-| # stty -F /dev/ttyS1 -echo -onlcr 921600 raw # cat /dev/ttyS1 &<br/> # echo "Serial Port Test" > /dev/ttyS1<br/> or<br/> # microcom -s 921600 -X /dev/ttyS1
-|-
-| 2
-| USB
-| USB disk write/read/verify pattern
-|-
-| 3
-| Ethernet
-| # ifconfig<br/> # ping 8.8.8.8
-|-
-| 4
-| EEPROM
-| # echo -n $'\x06\x05\x04\x03\x02\x01' > /data/test1<br/> # dd if=/data/test1 of=/sys/bus/i2c/devices/3-0050/eeprom<br/> # dd if=/sys/bus/i2c/devices/3-0050/eeprom of=/data/test2 conv=fsync
-|}

Difference between revisions of "UIO-4032"

Revision as of 06:27, 1 August 2024

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools