Revision as of 04:24, 28 August 2024

產品介紹

產品特性(Features)

• Qualcomm Arm® v8 Cortex® Gold plus up to 2.7 GHz
• 3x Arm v8 Cortex® Up to 2.4GHz
• Onboard LPDDR5 8GB, 8533MT/s memory
• 1x MIPI-DSI x4, 1x DP and 1x eDP1.4 for Displays
• 1x USB3.2 Gen1, 1x USB2.0, 2x PCIe Gen3.0 x1, 2x I2S, 2x 4wire UART, 1x SPI,16x GPIO, 2x I2C, 6x PWM, 2x MIPI-CSI x4
• 1x UFS, 1x eMMC and 1x 4-bit SDIO for storages
• Support Windows 11 and Ubuntu

產品官網連結(Product information Link)

 ROM-2860

接口布局和尺寸(Layout and Sizes)

 ROM-ED 接口布局圖 Board Dimension Layout

主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O, Jummper/Switch List:

快速入門 (Quick Start)

系统下载 (OS Download)

• 'Linux系统 (Linux OS)'   

Ubuntu 20.04 :  

Linux 燒錄方法 (Linux Flash Imgage Method)

1. Download the Qualcomm Software Center 

      Qualcomm® Software Center 

2. Open the Qualcomm Software Center 

3. Search "PCAT" in the search bar 

4. Click Qualcomm® Product Configuration Assistant Tool 

5. Select Qualcomm® Product Configuration Assistant Tool version 

    Version: 2.33.2.119

6. Install Qualcomm® Product Configuration Assistant Tool 2.33.2.119 

7. Search "QUTS" in the search bar  

8. Click the  Qualcomm® Unified Tools Services 

9. Select Qualcomm® Unified Tools Services version 

     Version : 1.75.2.9

10. Install Qualcomm® Unified Tools Services  1.75.2.9 

11. You will find the new application in your Windows system . 

12. Unzip the UFS File and eMMC File 

For example : 

         2860A1AIM37UIV10084_2024-08-08_ufs_debug.tgz

         2860A1AIM37UIV10084_2024-08-08_emmc_debug.tgz 

13 Connect your device via Micro USB.

Reformat  

For confirmation, we will erase the partition before UFS and eMMC installation. 

1.

Flash UFS

 1 Change the SW1 and SW2 

 Flash UFS:  the SW1 switch to 1-on, 2-on      Forced Recovery :  The SW2 switch to 1-on  ,2 - on . 

 2. Turn on the power 

 3. Open " PCATApp" Tool 

 4. Click " Connect A Device" 

5. Select  "Qualcomm HS-USB QDLoader 9008 (COM6) 

6. Click " Connect "  device 

7. When you connected successfully , it will show  "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 6) 

8. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS" 

9. Click " Download" 

10. UFS Download Status 

11. UFS Donwload compeleted 

 Flash eMMC

1.  Turn off the Power 

2. Change the SW1 and SW2 

 Flash eMMC:  the SW1 switch to 1-off, 2-on      Forced Recovery :  The SW2 switch to 1-on  ,2 - on . 

3. Turn on the power 

4. Make sure the device connection status. 

5. If the device disconnect with PCAT Tool , please connect it again. 

6. Select eMMC Folder.

7. Make sure the setting. 

通用方法(General Method)

查看CPU温度(Check CPU Temperature)

查看内存容量(Check Memory Capacity)

查看存储容量(Check Storage Capacity)

設置RTC (RTC Setting) 

查看系統時間 (Check the system) 

Linux BSP編譯方法(Linux BSP Compile Method)

Ubuntu 20.04