Revision as of 05:42, 28 August 2024

產品介紹

產品特性(Features)

• Qualcomm Arm® v8 Cortex® Gold plus up to 2.7 GHz
• 3x Arm v8 Cortex® Up to 2.4GHz
• Onboard LPDDR5 8GB, 8533MT/s memory
• 1x MIPI-DSI x4, 1x DP and 1x eDP1.4 for Displays
• 1x USB3.2 Gen1, 1x USB2.0, 2x PCIe Gen3.0 x1, 2x I2S, 2x 4wire UART, 1x SPI,16x GPIO, 2x I2C, 6x PWM, 2x MIPI-CSI x4
• 1x UFS, 1x eMMC and 1x 4-bit SDIO for storages
• Support Windows 11 and Ubuntu

產品官網連結(Product information Link)

 ROM-2860

接口布局和尺寸(Layout and Sizes)

 ROM-ED 接口布局圖 Board Dimension Layout

主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O, Jummper/Switch List:

快速入門 (Quick Start)

系统下载 (OS Download)

• 'Linux系统 (Linux OS)'   

Ubuntu 20.04 :  

Linux 燒錄方法 (Linux Flash Imgage Method)

1. Download the Qualcomm Software Center 

      Qualcomm® Software Center 

2. Open the Qualcomm Software Center 

3. Search "PCAT" in the search bar 

4. Click Qualcomm® Product Configuration Assistant Tool 

5. Select Qualcomm® Product Configuration Assistant Tool version 

    Version: 2.33.2.119

6. Install Qualcomm® Product Configuration Assistant Tool 2.33.2.119 

7. Search "QUTS" in the search bar  

8. Click the  Qualcomm® Unified Tools Services 

9. Select Qualcomm® Unified Tools Services version 

     Version : 1.75.2.9

10. Install Qualcomm® Unified Tools Services  1.75.2.9 

11. You will find the new application in your Windows system . 

12. Unzip the UFS File and eMMC File 

For example : 

         2860A1AIM37UIV10084_2024-08-08_ufs_debug.tgz

         2860A1AIM37UIV10084_2024-08-08_emmc_debug.tgz 

13 Connect your device via Micro USB.

Reformat  

For confirmation, we will erase the partition before UFS and eMMC installation. 

1. Select  provision button     

2. Add the prog_firehose_ddr.elf and provision_ufs31.xml in UFS  folder. 

3. Then press "OK" , it will start to do USF Provision. 

4. When the Provision finished , you can see the result in message window. 

Flash UFS

 1 Change the SW1 and SW2 

 Flash UFS:  the SW1 switch to 1-on, 2-on      Forced Recovery :  The SW2 switch to 1-on  ,2 - on . 

 2. Turn on the power 

 3. Open " PCATApp" Tool 

 4. Click " Connect A Device" 

5. Select  "Qualcomm HS-USB QDLoader 9008 (COM6) 

6. Click " Connect "  device 

7. When you connected successfully , it will show  "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 6) 

8. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS" 

9. Click " Download" 

10. UFS Download Status 

11. UFS Donwload compeleted 

 Flash eMMC

1.  Turn off the Power 

2. Change the SW1 and SW2 

 Flash eMMC:  the SW1 switch to 1-off, 2-on      Forced Recovery :  The SW2 switch to 1-on  ,2 - on . 

3. Turn on the power 

4. Make sure the device connection status. 

5. If the device disconnect with PCAT Tool , please connect it again. 

6. Select eMMC Folder.

7. Make sure the setting ,then press " Download " button.

 8. eMMC downlaoad status 

' 9. eMMC D'onwload compeleted 

10. When the eMMC installation finished . Close the PCAT tool ,

11 pleaes remove the mirco usb cable, turn off the power 

12. eMMC boot up :  SW1 switch to 1-off, 2-on      Forced Recovery :  The SW2 switch to 1-off  ,2 - on . 

13. Connect debug cable and open the terminal ,  turn on the power . 

14.  If you have done " Reformat " , the message will show " DDR: Start of DDR Training Init "   

15.  When the systme boot up , you need to type  " qcs6490-rom2860a1 login: root "  , " Password: oelinux123"

16.  After type the long in and password , and you also can chek the image information about date , kernel version etc.. 

通用方法(General Method)

查看CPU温度(Check CPU Temperature)

查看内存容量(Check Memory Capacity)

查看存储容量(Check Storage Capacity)

設置RTC (RTC Setting) 

查看系統時間 (Check the system) 

Linux BSP編譯方法(Linux BSP Compile Method)

Ubuntu 20.04