Difference between revisions of "ROM-6881 Debain12 user guide"
From ESS-WIKI
Xingxing.li (talk | contribs) (Created page with " == '''產品特性(Features)''' == *Rockchip RK3588 Arm Quad Cortex-A76 2.4GHz and Quad Cortex-A55 1.8 GHz *Onboard 4/8 GB LPDDR4 memory and 32/64 GB eMMC *Supports 8K @ 6...") |
(No difference)
|
Revision as of 02:22, 5 February 2025
Contents
- 1 產品特性(Features)
- 2 接口佈局和尺寸（Layout and Sizes）
- 2.1 ROM-6881接口佈局图 Board Dimension Layout
- 2.2 SOM-DB2510 A1 Board Dimension Layout
- 2.3 SOM-DB2510 Connectors and Jumper Settings（default state）
- 2.4 LED Function List
- 2.5 Switch Settings
- 2.6 接口引脚定義 (Connector Pin definitions)
- 2.7 ROM-6881 機械尺寸（Mechanical Characteristics）
- 2.8 SOM-DB2510_A1 机械尺寸 (Mechanical Characteristics)
- 2.9 Board Mechanical Diagram -Front
- 2.10 Assemblly Diagram
- 3 快速入门 (Quick Start)
- 4 Linux基本使用方法
- 5 Linux BSP编译方法（Linux BSP Compile Method）
產品特性(Features)
- Rockchip RK3588 Arm Quad Cortex-A76 2.4GHz and Quad Cortex-A55 1.8 GHz
- Onboard 4/8 GB LPDDR4 memory and 32/64 GB eMMC
- Supports 8K @ 60 fps H.265/VP9 video decoding and 8K @ 30 fps H.265/H.264 video encoding
- Supports HDMI, DP, eDP and LVDS/DSI
- 4 x PCIe 3.0, dual gigabit LAN, 2 x USB 3.0, USB2.0 OTG, SATA 3.0, 2 x CAN, 4 x MIPI-CSI, 3 x UART
- Supports Linux Debian11 and Android
產品官網鏈接（Product official website link）
ROM-6881 - 研华 (advantech.com.cn)
接口佈局和尺寸（Layout and Sizes）
ROM-6881接口佈局图 Board Dimension Layout
SOM-DB2510 A1 Board Dimension Layout
The figures below indicate the main chips on SOM-DB2510 Development Board for SMARC 2.1.
SOM-DB2510 Connectors and Jumper Settings（default state）
Connector Locations
Switch Locations
I/O Connctor Locations
Button Locations
LED Locations
| Label | Function | Label | Function |
| ATX1 | ATX Connector | FAN1 | Smart Fan Connector |
| SMARC_IN1 | Wide Range Input Power Connector (3V~5.25V) | FAN2 | System Fan Connector |
| DCIN1 | DCIN connector | CAN0_1 | CAN Bus Connector |
| DP0_HDMI | DP & HDMI Connector | USB0 | USB OTG Connector |
| USB12 | USB 2.0 port1~2 & USB 3.0 port0 Connector | COM1_3 | COM Port Port1,3 Connector |
| TYPEC_DP1 | Type-C Connector | COM2_4 | COM Port Port2,4 Connector |
| LAN0_LAN1 | LAN0 & LAN1 Connector | CN8 | I2C connector for I2C_PM |
| LOUT1 | Line Out Connector | CN7 | I2C Connector for I2C_GP |
| MIC1 | MIC1 Connector | CN10 | eSPI Pin Header |
| CN1_MXM1 | SMARC Connector | SATAP1 | SATA Power Connector |
| PCIEA-X4 | PCIe x4 Connector | CSI0_B2B | MIPI B2B Connector for 2M Camera |
| SATA1 | SATA Port0 Connector | CSI1_B2B | MIPI B2B Connector for 8M & 13M Camera |
| PCIED-X1 | PCIe x1 Connector | SPI_BIOS1 | Carrier Board BIOS Socket (SOIC) |
| M2 | M.2 Key-E Connector | BAT1 | Coin battery holder |
| MPCIE_C | Mini PCIe Connector | BAT2 | Smart battery Connector |
| SIM | SIM card Connector | LINEOUT_1 | I2S Headphone Connector |
| LVDS1 | LVDS1 Connector | MIC_1 | I2S MIC In Connector |
| LVDS0 | LVDS0 Connector | CSI1_FPC | MIPI FPC Connector for 8M & 13M Camera |
| LVDS1_INVERTER | LVDS1 Invertor Connector | CSI0_FPC | MIPI FPC Connector for 2M Camera |
| LVDS0_INVERTER | LVDS0 Invertor Connector | CN5 | I2S2 Connector |
| SPI_BIOS2 | Carrier Board BIOS Socket (QFN) | CN17 | I2S0 Connector |
| SD | SD Card Connector |
Jumper Locations
| Lable | Function | Lable | Function |
| BTN3 | Sleep Button | J14 | EDP1/LVDS1 Hot-Plug Detect Selection Header |
| BTN1 | Power Button | J56 | Standby Voltage Control Header |
| BTN2 | Reset Button | J44 | Module +3.3V/+5V Power Selection Header |
| SW4 | BOOT SELECT Switch | PSON1 | AT/ATX Selection Header |
| LID1 | LID Switch | SPI_CN1 | SPI Header |
| J30 | Enable Battery Low# Header | CN14 | For CAN Bus port0 Terminal Resistor |
| M2E_DISABLE_N1 | M.2 Wireless Disable | CN15 | For CAN Bus port1 Terminal Resistor |
| J29 | SMB Alert Enable Header | J3/J4 | DP0 EQ0 Selection |
| CN9 | Header For GPIO Test | J5/J6 | DP0 EQ1 Selection |
| J7/J8 | LVDS0 Power Selection Header | J58 | PCIE_B_CKREQ# Selection |
| J11/J12 | LVDS1 Power Selection Header | J59 | PCIE_A_CKREQ# Selection |
| J9 | LVDS0 Inverter Power Selection Heade | GPIO_0 | GPIO0/CAM0_PWR# Selection |
| J10 | EDP0/LVDS0 Hot-Plug Detect Selection Header | GPIO_1 | GPIO1/CAM1_PWR# Selection |
| J26 | HDA/I2S Selection Header | GPIO_2 | GPIO2/CAM0_RST# Selection |
| J1 | DP1/HDMI1 Select | GPIO_3 | GPIO3/CAM1_RST# Selection |
| J13 | LVDS1 Inverter Power Selection Header | GPIO_4 | GPIO4/HDA_RST# Selection |
| J31 | Clear CMOS Header | GPIO_5 | GPIO5/PWM_OUT Selection |
| J25 | SPI Power Header | GPIO_6 | GPIO6/TACHIN Selection |
| SW1 | COM1 mode Select | SATA_ACT_PH1 | SATA act# Header |
| SW2 | COM3 mode Select | PWRBTN_PH1 | Power button Header |
| J41 | Core Power Voltage Control Header | SYS_RESET_PH1 | Reset button Header |
| J2 | DDI1 AUX/DDC Selection |
LED Function List
| Location | Function |
| MODULE_VIN_LED1 | WDT_TIME_OUT# Indicate |
| MODULE_5V_LED | Module 5V Indicate |
| MODULE_VIN_LED | Module +V_MOD_IN Indicate |
| RESET_OUT_LED | RESET_OUT Indicate |
| RESET_OUT_LED | CARRIER_STBY Indicate |
| CARRIER_PWR_ON_LED | CARRIER_PWR_ON Indicate |
| MODULE_3P3V_LED | Module 3.3V Indicate |
| 3P3V_LED | Carrier Board +V3.3 Indicate |
| 5V_LED | Carrier Board +V5 Indicate |
| 5V_DUAL_LED | Carrier Board +V5SB Indicate |
| 3P3V_DUAL_LED | Carrier Board +V3.3SB Indicate |
| 5VA_LED | Carrier Board +V5D_MOD Indicate |
| SATA_LED | SATA Indicate |
| SOM_LED | SOM BOM Indicate |
| RISC_LED | RISC BOM Indicate |
Switch Settings
ROM-6881 Switch Settings
- SW1（AT & ATX Mode Switch）
SOM-DB2510 Switch Settings
- SW4 (Boot Select/Force Recovery/Test Switches)
- LID1 (LID Button Enable/Disable Switches)
- SW5 (LAN CONN LED Pull High Switches)
- SW1(COM0 Settings)
- SW2(COM2 Settings)
- SW3 (I2S Clock Settings)
- M2E_DISABLE_N1(M.2 Wireless Disable Switch)
接口引脚定義 (Connector Pin definitions)
ROM-6881 Pin Connector
SOM-DB2510 Pin Connector
- ATX1 Pin Connector
- SMARC_IN1 Pin Connectors
- BAT1 RTC Battery Connectors
- DCIN1 DC-IN Power Connectors
- CAN0_1 CAN Bus Connectors
- CN9 GPIO Headers
- COM2_4 COM Port2&4 Connectors
- COM1_3 COM Port1& 3 Connectors
- CN10 ESPI Headers
- LVDS0 LVDS Connectors
- LVDS0_INVERTER LVDS INVERTER Connectors
- LVDS1 LVDS Connectors
- LVDS1_INVERTER LVDS INVERTER Connectors
- CN7 I2C_GP Connectors
- SPI_CN1 SPI Connectors
- SATAP1 SATA PWR Connectors
- CSI0_FPC Connectors
- CSI1_FPC Connectors
- CN5 I2S2 Connectors
- CN17 I2S0 Connectors
- PWRBTN_PH1 PWRBTN Pin Headers
- SYS_RESET_PH1 SYS RESET Pin Headers
- SATA_ACT_PH1 SATA ACT# Pin Headers
- J32 Power LED Pin Headers
- J30 BATLOW Pin Headers
- J29 SMBUS Alert Pin Headers
- J41 Core Power Controls
- PSON1 ATX/AT Mode Selection
- J56 Standby Power Controls
- J44 Module Power Settings
- J7,J8 LVDS0 Power Selection
- J9 LVDS0 Inverter Power Selection
- J11,J12 LVDS1 Power Selection
- LVDS1 Inverter Power Selection
- EDP0 /LVDS0 HPD Selection
- J14 EDP1/LVDS1 HPD Selection
- CN14 CAN0 Terminal Resistor Selection
- CN15 CAN1 Terminal Resistor Selection
- J2 DDI1 AUX/DDC Selection
- J1 DP1/HDMI1 Selection
- J58 PCIE_B_CKREQ# Selection
- J59 PCIE_A_CKREQ# Selection
- J31 Clear CMOS
- J25 +V1.8M_SPI Power Jumpers
- GPIO_0 GPIO0 Settings
- GPIO_1 GPIO1 Settings
- GPIO_2 GPIO2 Settings
- GPIO_3 GPIO3 Settings
- GPIO_4 GPIO4 Settings
- GPIO_5 GPIO5 Settings
- GPIO_6 GPIO6 Settings
- J26 HDA/I2S Selection
ROM-6881 機械尺寸（Mechanical Characteristics）
- Dimension: SMARC form factor size: (D x W) 82 x 80 mm / 3.22 x 3.15 inch
- Height on Top: 2.4 mm
- Height on Bottom: 1.45 mm
SOM-DB2510_A1 机械尺寸 (Mechanical Characteristics)
For more details regarding our 2D/3D models, please visit the Advantech COM support service website at: http://com.advantech.com.
Board Mechanical Diagram -Front
Board Mechanical Diagram -Side1
Board Mechanical Diagram -Side2
Assemblly Diagram
These figures demonstrate the order of assembly needed when attaching the thermal module and COM module to the carrier board.
快速入门 (Quick Start)
系统下载 (OS Download)
Debian 燒錄方法 (Debiand Flash eMMC Method)
2. Usering bootup_sd_disk made_by SDDiskTool.