Difference between revisions of "ASR-A501 Ethernet & LED"
From ESS-WIKI
Xingxing.li (talk | contribs) (Created page with " === '''Ethernet''' === ASR-A501 supports four Ethernet ports: eth0, eth1, eth2, eth3.All ports are using the “DHCP” mode by default. The following configurations and tes...") |
Xingxing.li (talk | contribs) (→Configure to Static IP) |
||
| Line 16: | Line 16: | ||
|} | |} | ||
| + | |||
==== '''Configure to Static IP''' ==== | ==== '''Configure to Static IP''' ==== | ||
| − | | + | 1. Click “Applications” -> “Settings” -> “Advanced Network Configration”. |
| + | |||
| + | [[File:ROM-6881 Eethernet.png|500x300px|ROM-6881 Eethernet.png]] | ||
| + | |||
| + | 2. Double-click “Wired Connection 1” to configure it. | ||
| + | |||
| + | [[File:ROM-6881 Ethernet wired connection.png|500x300px|ROM-6881 Ethernet wired connection.png]] | ||
| + | |||
| + | == Configure to DHCP == | ||
| + | |||
| + | 1. Click “Applications” -> “Settings -> “Advanced Network Configration”. | ||
| + | |||
| + | [[File:ROM-6881 Network.png|500x300px|ROM-6881 Network.png]] | ||
| + | |||
| + | 2. Double-click “Wired Connection 1” to configure it. | ||
| + | |||
| + | [[File:ROM-6881 Ethernet IPV4.png|500x300px|ROM-6881 Ethernet IPV4.png]] | ||
| + | |||
| + | == Ethernet Test == | ||
| − | + | After connection, Ethernet will create a net point “eth0” and “eth1”. | |
| + | <pre># #---- Test eth0 ----# # | ||
| + | # ping –I eth0 www.advantech.com | ||
| + | # #---- Test eth1 ----# # | ||
| + | # ping –I eth1 www.advantech.com | ||
| + | </pre> | ||
Revision as of 02:13, 21 May 2025
Ethernet
ASR-A501 supports four Ethernet ports: eth0, eth1, eth2, eth3.All ports are using the “DHCP” mode by default. The following configurations and tests are taking eth0 as an example.
| Ethernet | Chipset & Speed |
2 x RTL8211FS 10/100/1000Mbps 1 x RTL8119I 10/100/1000Mbps 1 x Intel I226 2.5Gbps |
Configure to Static IP
1. Click “Applications” -> “Settings” -> “Advanced Network Configration”.
2. Double-click “Wired Connection 1” to configure it.
Configure to DHCP
1. Click “Applications” -> “Settings -> “Advanced Network Configration”.
2. Double-click “Wired Connection 1” to configure it.
Ethernet Test
After connection, Ethernet will create a net point “eth0” and “eth1”.
# #---- Test eth0 ----# # # ping –I eth0 www.advantech.com # #---- Test eth1 ----# # # ping –I eth1 www.advantech.com