Difference between revisions of "ASR-A501 PCIE M.2 E Key"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
== '''SW Function：''' == | == '''SW Function：''' == | ||
| − | + | '''Default supported ADVANTECH Wi-Fi6 module: EWM-W179M201E.''' | |
| − | + | === '''WIFI Test''' === | |
| − | |||
| − | === ''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[File:EWM-W179M201E.png|RTENOTITLE]] | [[File:EWM-W179M201E.png|RTENOTITLE]] | ||
| Line 65: | Line 23: | ||
[[File:ASR-A501 WIFI 3.png|RTENOTITLE]] | [[File:ASR-A501 WIFI 3.png|RTENOTITLE]] | ||
| − | |||
| − | |||
After connection, Wi-Fi will create a net point “wlan0”. | After connection, Wi-Fi will create a net point “wlan0”. | ||
| − | <pre># ping -I wlan0 www.advantech.com</pre> | + | <pre># ping -I wlan0 www.advantech.com |
| − | + | </pre> | |
=== '''BT（For example：“Mate 50 Pro”）''' === | === '''BT（For example：“Mate 50 Pro”）''' === | ||
Latest revision as of 07:41, 6 June 2025
HW Pin define：
SW Function：
Default supported ADVANTECH Wi-Fi6 module: EWM-W179M201E.
WIFI Test
1、Click the network icon in the top right corner of the screen and click the line of “Available networks” to select a Wi-Fi connection (for example: Advantech for guest)
2、Enter the Wi-Fi password to connect to the device.
3、If the password is correct, the device will connect quickly.
After connection, Wi-Fi will create a net point “wlan0”.
# ping -I wlan0 www.advantech.com
BT（For example：“Mate 50 Pro”）
Step1：Click “Applications” -> “Settings”-> “Bluetooth manager”. Click the “Search” button to search for Bluetooth devices.
Step2：Right-click to select a device, such as “Mate 50 Pro”, and Connect Bluetooth.
Step3：ASR-A501 will start sending files when the receiver device, such as “Mate 50 Pro”, confirms bluetooth reception.
Step4：View the location and information of the sent file
