Difference between revisions of "AFE-E420 M2B CN1"
From ESS-WIKI
(Created page with "AFE-E420 Connector M2B CN1-A AFE-E420 Connector M2B CN1-B File:AFE-E420 Connector M2B CN...") |
|||
| Line 5: | Line 5: | ||
[[File:AFE-E420 Connector M2B CN1-D.jpg|AFE-E420 Connector M2B CN1-D]] | [[File:AFE-E420 Connector M2B CN1-D.jpg|AFE-E420 Connector M2B CN1-D]] | ||
| + | |||
| + | == ''' 4G Network Setup ''' == | ||
| + | Verified by EWM-C401CQE01 module, J1 jumper must be set to 1-3 and 2-4. | ||
| + | |||
| + | Check signal strength. | ||
| + | ::<code># stty -F /dev/ttyUSB5 speed 115200 -echo</code> | ||
| + | ::<code># cat /dev/ttyUSB5 &</code> | ||
| + | ::<code># echo -e "AT+CSQ\r" > /dev/ttyUSB5</code> | ||
| + | |||
| + | Terminal message: | ||
| + | ::AT+CSQ | ||
| + | ::+CSQ: 99,99 | ||
| + | ::OK | ||
| + | |||
| + | Test connection by pppd. | ||
| + | <pre># pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' \ | ||
| + | user username \ | ||
| + | password password \ | ||
| + | /dev/ttyUSB6 460800 \ | ||
| + | nodetach crtscts debug usepeerdns defaultroute &</pre> | ||
Latest revision as of 10:54, 13 June 2025
4G Network Setup
Verified by EWM-C401CQE01 module, J1 jumper must be set to 1-3 and 2-4.
Check signal strength.
# stty -F /dev/ttyUSB5 speed 115200 -echo# cat /dev/ttyUSB5 &# echo -e "AT+CSQ\r" > /dev/ttyUSB5
Terminal message:
- AT+CSQ
- +CSQ: 99,99
- OK
Test connection by pppd.
# pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' \ user username \ password password \ /dev/ttyUSB6 460800 \ nodetach crtscts debug usepeerdns defaultroute &