Difference between revisions of "DS 015 Burnin"

Revision as of 10:43, 13 August 2025

Attention

Account & Password

Account number

ubuntu

In device used "sudo" or "sudo su" to root. Password required.

ubuntu

Burnin HW Setting

Device A Can port link Device B Can port
Com1 port link Loop back
Lan1 link Lan2

Can switch setting

Set JPCAN1 Jumper to Can mode

Switch SW3 to ON

Com1 switch setting

Orin-Nano COM1: ttyTHS1

Switch to RS-232

Select the mode and refer to the table

RS-232 COM1_SW1 OFF-OFF-OFF-OFF

Burnin SW Setting

Screen Blank setting

Please in OS setting Power
Power --> Power Saving Options --> Screen Blank --> Never

Lan setting

Please in OS setting Network

Delete all ethernet first
Details --> Remove Connection Profile

Intel Ethernet --> IPv4 --> Manual
Addresss: 192.168.0.1 | Netmask: 255.255.255.0
--> Apply

Realtek Ethernet --> IPv4 --> Manual
Addresss: 192.168.0.11 | Netmask: 255.255.255.0
--> Apply

Manual testing

$ ping -I 192.168.0.1 -O -D 192.168.0.11

Burnin

In first time setting Burnin tool

$ cd /usr/local/bin/Burnin
$ sudo tar -zxvf Burnin_ds015.tar.gz
$ cd Burnin_ds015

Please link on network to upgrade tool

$ sudo ./install.sh

In device A please run command below

$ cd /home/ubuntu
$ sudo ./Burnin_DS015_A.sh

In device B please run command below

$ cd /home/ubuntu
$ sudo ./Burnin_DS015_B.sh

EMI Burnin

EMI colorbar In device please run command below

$ cd /home/ubuntu
$ sudo ./Burnin.sh

Reference

DS-015 Development