Difference between revisions of "DS 015 Burnin"
| (10 intermediate revisions by the same user not shown) | |||
| Line 10: | Line 10: | ||
ubuntu | ubuntu | ||
</pre> | </pre> | ||
| + | ==Burnin HW Setting== | ||
| + | 1. Device A Can port link Device B Can port | ||
| + | <br/> | ||
| + | 2. Com1 port link Loop back | ||
| + | <br/> | ||
| + | 3. Lan1 link Lan2 | ||
| + | <br/> | ||
| + | [[File:Ds015-hw.jpg|600px|border]] | ||
| − | ==Burnin Setting== | + | ====Can switch setting==== |
| + | [[File:Canbus ds015 4.png|600px|border]] | ||
| + | |||
| + | <span style="color:#FF0000;">'''Set JPCAN1 Jumper to Can mode'''</span> | ||
| + | <br/> [[File:Canbus ds015.png|600px|border]] | ||
| + | |||
| + | <span style="color:#FF0000;">'''Switch SW3 to ON'''</span> | ||
| + | <br/> [[File:Canbus ds015 1.png|600px|border]] | ||
| + | |||
| + | ====Com1 switch setting==== | ||
| + | <font color="#0070c0">Orin-Nano</font> COM1: ttyTHS1 <br/> | ||
| + | [[File:Uart ds015.png|600px|border]] | ||
| + | |||
| + | Switch to RS-232 | ||
| + | <br/> | ||
| + | <span style="color:#FF0000;">'''COM1_SW1 OFF-OFF-OFF-OFF'''</span> | ||
| + | |||
| + | [[File:Uart ds015 1.png|600px|border]] | ||
| + | |||
| + | ==Burnin SW Setting== | ||
===Screen Blank setting=== | ===Screen Blank setting=== | ||
Please in OS setting Power | Please in OS setting Power | ||
Latest revision as of 10:50, 13 August 2025
Contents
Attention
Account & Password
Account number
ubuntu
In device used "sudo" or "sudo su" to root. Password required.
ubuntu
Burnin HW Setting
1. Device A Can port link Device B Can port
2. Com1 port link Loop back
3. Lan1 link Lan2
Can switch setting
Set JPCAN1 Jumper to Can mode
Switch SW3 to ON
Com1 switch setting
Orin-Nano COM1: ttyTHS1
Switch to RS-232
COM1_SW1 OFF-OFF-OFF-OFF
Burnin SW Setting
Screen Blank setting
Please in OS setting Power
Power --> Power Saving Options --> Screen Blank --> Never
Lan setting
Please in OS setting Network
Delete all ethernet first
Details --> Remove Connection Profile
Intel Ethernet --> IPv4 --> Manual
Addresss: 192.168.0.1 | Netmask: 255.255.255.0
--> Apply
Realtek Ethernet --> IPv4 --> Manual
Addresss: 192.168.0.11 | Netmask: 255.255.255.0
--> Apply
Manual testing
$ ping -I 192.168.0.1 -O -D 192.168.0.11
Burnin
In first time setting Burnin tool
$ cd /usr/local/bin/Burnin $ sudo tar -zxvf Burnin_ds015.tar.gz $ cd Burnin_ds015
Please link on network to upgrade tool
$ sudo ./install.sh
In device A please run command below
$ cd /home/ubuntu $ sudo ./Burnin_DS015_A.sh
In device B please run command below
$ cd /home/ubuntu $ sudo ./Burnin_DS015_B.sh
EMI Burnin
EMI colorbar In device please run command below
$ cd /home/ubuntu $ sudo ./Burnin.sh