Difference between revisions of "Using RKTool for ASR-A501."
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 55: | Line 55: | ||
[[File:ASR-A501 OTG Step4.2.png|RTENOTITLE]] | [[File:ASR-A501 OTG Step4.2.png|RTENOTITLE]] | ||
| − | + | [[File:ASR-A501 OTG Step4.3.png|RTENOTITLE]] | |
| + | |||
| + | === '''After burning, open putty to check the image version.''' === | ||
[[File:ASR-A501 OTG Step5.png|RTENOTITLE]] | [[File:ASR-A501 OTG Step5.png|RTENOTITLE]] | ||
[[File:ASR-A501 OTG Step5.1.png|RTENOTITLE]] | [[File:ASR-A501 OTG Step5.1.png|RTENOTITLE]] | ||
Latest revision as of 07:09, 18 August 2025
Contents
- 1 For example, the PC used is a laptop. The specifications are as follows：
- 2 Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:
- 3 Go to the RKDevTool_Release folder and run the RKDevTool.exe program.
- 4 The test environment is set up as follows:
- 5 Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.
- 6 After burning, open putty to check the image version.
For example, the PC used is a laptop. The specifications are as follows：
Decompress the downloaded image on the PC.
Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:
Change Tool language in config.ini, please change "Selected: to "2"
选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\
Go to the RKDevTool_Release folder and run the RKDevTool.exe program.
Note: Please ensure that the path for burning the file is correct.
The test environment is set up as follows:
Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.
Method 1: After powering on and starting up, press "Ctrl+C" to enter "u-boot", input the "rbrom" command, and enter the MASKROM mode.
Debian ：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # rbrom
Method Two: Press the "MASKROM" button, then power on and turn on the device, and it will directly enter the MASKROM mode.
After burning, open putty to check the image version.
